Search Results

Search found 11 results on 1 pages for 'ranjith sr2gf'.

Page 1/1 | 1 

  • Read only file system error on ubuntu after partitioning

    - by Ranjith R
    I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

    Read the article

  • Can I get the classic "run command" window

    - by Ranjith R
    I love unity but I hate it when alt+f2 brings up the dash. Is it possible to just remap alt+f2 so that the thing looks like exactly the old alt+f2 I know what I want is like going back in time but I really loved that fast command runner in old gnome. I can bring up terminal using ctrl+alt+T and run anything I want but it sometimes is a overkill to bring up something like that for small things. And I used to like the fact that older window was fast, had autofill and would disappear after launching the command. Or is there a utilty that looks somewhat like that and can be installed and mapped to some key.

    Read the article

  • "Failed to mount Windows share" error in Samba

    - by Ranjith R
    This is the situation. There are 3 machines in the office. The Operating systems on them are respectively, Linux mint Ubuntu 12.04 Windows Vista The Ubuntu (#2) machine is supposed to be the common file server between the machines #1 and #3. Machine #2 has two hard disks. One is a 500 GB NTFS empty drive and the other is a 160 GB ext4 drive. My plan is to make the 500 GB as the file sharing disk. When I share a folder like ~/Documents using Nautilus context menu on machine #2, I can access the files easily on both #1 and #3, but when I try to share some folder on 500 GB disk, I get an error on machine #1 that says Failed to mount windows share I do not mind formatting the drive to ext4 if needed, but I am sure that something simple is wrong. EDIT I took @Marty's comment as a hint and used ntfs-config to configure automount of that partition. It is working now. Thanks

    Read the article

  • Certain websites do not open. Instead a 1*1 image gets displayed

    - by Ranjith - SR2GF
    When I try to visit certain websites like www.bidvertiser.com, www.buysellads.com, a white page shows up, the title bar displays the site name followed by (1x1) in brackets. When I right click, 'View Source' option appears disabled. The Save As.. option shows the file type to be gif. However, when I preview the site in Google search results ( by moving the mouse over ) the screenshot of the site displays well. This happens on all the three browsers on my computer: Chrome, Firefox and IE. What is the problem and how can it be resolved? EDIT: At some point of time, they probably worked on my computer! I think it is a more general problem. The same happens when I click on certain links in Google search results.

    Read the article

  • Internet slowed down because of SQUID Server setup

    - by Ranjith Kumar
    Recently I have setup a squid server for our office. I have computer (A) with two ethernet cards, one for internet and the second one for local networkIt has Ubuntu server OS with squid-server and dhcp3-server installedI have added few iptable rules to work like a router and redirect all http traffic to 3128 port This link is my reference. Everything worked fine for 2 days. All of a sudden internet speed went down drastically. When I connected the internet cable to my laptop to test the internet speed it was fine. Again when I reconnected it back to computer A everything was normal. This happened 4 times in a week. Could anyone here please help me why the internet speed is going down and it becomes normal when I reconnect the cable. EDIT: Rebooting the system (computer A) didn't make a difference. I have changed iptables so that http traffic doesn't redirect to 3128 port any further, still no change in the internet speed. I think the problem is not with squid but with something else. Here are my iptable rules SQUID_SERVER="10.1.1.1" INTERNET="eth1" LAN_IN="eth0" SQUID_PORT="3128" PROXYSERVERS=(Atlanta Baltimore Boston Chicago Dallas Denver Houston KansasCity LosAngeles Miami NewYork Philadelphia Phoenix SanAntonio SanDiego SanJose Seattle Washington) SERVERLEN=${#PROXYSERVERS[*]} I=0 iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X modprobe ip_conntrack modprobe ip_conntrack_ftp echo 1 /proc/sys/net/ipv4/ip_forward iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT while [ $I -lt $SERVERLEN ]; do iptables -t nat -A PREROUTING -i $LAN_IN -p tcp -d ${PROXYSERVERS[$I]}.wonderproxy.com --dport 80 -j ACCEPT let I++ done iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT iptables -A INPUT --protocol tcp --dport 80 -j ACCEPT iptables -A INPUT --protocol tcp --dport 443 -j ACCEPT iptables -A INPUT --protocol tcp --dport 22 -j ACCEPT iptables -A INPUT -j LOG iptables -A INPUT -j DROP

    Read the article

  • Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

    - by Ranjith Kumar
    In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

    Read the article

  • AngularJS: How to make angular load script inside ng-include?

    - by Ranjith R
    Hey I am building a web page with angular. The problem is that there are somethings already build without angular and I have to include them as well The problem is this. I have something like this in my main.html: <ngInclude src="partial.html"> </ngInclude> And my partial.html has something like this <h2> heading 1 <h2> <script type="text/javascript" src="static/js/partial.js"> </script> And my partial.js has nothing to do with angularjs. nginclude works and I can see the html, but I can not see the javascript file being loaded at all. I know how to use firebug/ chrome-dev-tool, but I can not even see the network request being made. What am I doing wrong? I knwo angular has some special meaning to script tag. Can I override it?

    Read the article

  • MongoDb - $match filter not working in subdocument

    - by Ranjith
    This is Collection Structure [{ "_id" : "....", "name" : "aaaa", "level_max_leaves" : [ { level : "ObjectIdString 1", max_leaves : 4, } ] }, { "_id" : "....", "name" : "bbbb", "level_max_leaves" : [ { level : "ObjectIdString 2", max_leaves : 2, } ] }] I need to find the subdocument value of level_max_leaves.level filter when its matching with given input value. And this how I tried, For example, var empLevelId = 'ObjectIdString 1' ; MyModel.aggregate( {$unwind: "$level_max_leaves"}, {$match: {"$level_max_leaves.level": empLevelId } }, {$group: { "_id": "$level_max_leaves.level", "total": { "$sum": "$level_max_leaves.max_leaves" }}}, function (err, res) { console.log(res); }); But here the $match filter is not working. I can't find out exact results of ObjectIdString 1 If I filter with name field, its working fine. like this, {$match: {"$name": "aaaa" } }, But in subdocument level its returns 0. {$match: {"$level_max_leaves.level": "ObjectIdString 1"} }, My expected result was, { "_id" : "ObjectIdString 1", "total" : 4, }

    Read the article

  • Ideally How many connections I have to open ?

    - by ranjith-kumar-u
    Hi All, Recently I attended interview in java, the interviewer asked a question like below: I have a request which go throgh A,B,C modules and response go back throgh A , in module A I need to talk to database and again in module C I need to talk to database, so in this situation how many connections you will open and where do you close those connections? My Answer: I said that in module A I will open a connection and I will close it then and there, then control go to module B then module C, in module C again I will open one more connection and i will close it again. then he asked me again another question I want to open one connection per one request processing, how can i do this?

    Read the article

  • Spring security or BCrypt algorithm which one is good for accounts like project?

    - by Ranjith Kumar Nethaji
    I am using spring security for hashing my password.And is it safe ,because am using spring security for first time. my code here <security:http auto-config="true"> <security:intercept-url pattern="/welcome*" access="ROLE_USER" /> <security:form-login login-page="/login" default-target-url="/welcome" authentication-failure-url="/loginfailed" /> <security:logout logout-success-url="/logout" /> </security:http> authentication-failure-url="/loginfailed" /> <security:logout logout-success-url="/logout" /> </security:http> <authentication-manager> <authentication-provider> <password-encoder hash="sha" /> <user-service> <user name="k" password="7c4a8d09ca3762af61e59520943dc26494f8941b" authorities="ROLE_USER" /> </user-service> </authentication-provider> </authentication-manager> .And I havnt used bcrypt algorithm.what is your feedback for both?any recommendation?

    Read the article

1