Search Results

Search found 9 results on 1 pages for 'scdpm'.

Page 1/1 | 1 

• DPM 2010 "Disk failed or disk not found"

  - by SysAdmin

  I have an HP Proliant ML110 G5 server with Windows server 2008R2 only dedicated for DPM 2010. This server has a limit in HD of 8TB which has already been met. I'm now stuck in this situation where my disk keeps failing "Disk failed or Disk not found" in the disk management. Only after I reboot the system the disk comes back up. Today I was running my monthly tape backup on a certain protection group and the disk failed again while the tape job was running (so the job wasn't completed). This is the description of the error in the alerts: "The disk Disk 1 - Hitachi HDS722020ALA330 SCSI Disk Device cannot be detected or has stopped responding. All subsequent protection activities that use this disk will fail until the disk is brought back online. (ID 3120)". My backup system is becoming useless! I don't think that is a hardware issue (please correct me if I'm wrong) since the HD works fine for a certain period of time which is becoming shorter and shorter. I basically have no more option to fix this problem. I tried to fix any error that was coming up in the event viewer with no luck (included one regarding the SQL2008 compatibility issue). The disk keeps failing! Now I'm only trying to recover/migrate the data from the disk that is having problem but my issue now is that I cannot add any drives to my server since I already got installed the maximum storage capacity 8TB. I thought about 2 simple options. Please tell me what you guys think about it; Unplug one of the 2 storage pool disks (disk0, that one without problem) from the machine and install a new one in order to migrate the data with the Migration tool for DPM. Remove the defective disk (disk1), put back the disk0 and run the synchronization/consistency check on all the groups to recreate replicas and recovery points. Run diskpart.exe and clean up the disk (loosing all data) and hoping that he will work after I sync all the protection groups. Both solutions are not elegant but I have no better options at the moment. Please I need some help. Thanks for your time Angelo

  Read the article

• Restore more than 250 files using DPM 2010 and PowerShell

  - by toryan

  I've got what should be a fairly simple task: restore the following files from DPM: D:\inetpub\wwwroot\*\index.* I followed the instructions in this TechNet wiki and pretty much thought I had it. Unfortunately, the New-SearchOption commandlet can only return 250 results, and this search would generate way more results than that. So actually only the first 250 files were restored, which is no use to anybody. Does anyone know of any way to get around the 250 search results limit? I guess it would be possible to get the subdirectories of D:\inetpub\wwwroot and loop through them in turn, but I kind of want to keep this fairly simple as it is only for this task.

  Read the article

• DPM 2010 iSCSI Mirror

  - by Thermionix

  We're using DPM 2010 for exchange backups, The backup Disk(s) are iSCSI attached drives from multiple NAS boxes. We'd like to mirror iqn.2009-07.com.example.example:RAID.iscsi4.vg0.iscsi05 onto iqn.2012-3.com.example.example:RAID.iscsi4.vg0.iscsi05 DPM 2010 requires the disk for itself and handles volume creation, Therefore we can't just create a mirrored volume in Disk Management. DPM itself doesn't seem to have any ability to mirror the Disks in its storage pool. Any tips on how to mirror the volumes from one drive to the other?

  Read the article

• How to auto mark tape as free in DPM 2012?

  - by Massimo

  I have a backup server running System Center Data Protection Manager 2012, connected to a couple of tape drives (no library). I also have, of course, some tapes. Tape rotation is manual. The tape have been used before, by DPM itself (but the server has been completely rebuilt) and by other backup softwares; they are not emtpy. But they contain no data that DPM knows and/or wants to preserve, so they can be marked as free without having to run forcefreetape.ps1. When a tape is placed into the drive, it is required to perform an inventory, have it recognized as an imported tape and then mark it as free; otherwise DPM will simply refuse to use it. How can I tell DPM to automatically treat those imported tapes as free? And, of course, I do not want to reuse real backup tapes if by chance they get put into the drives before their expiration date, so the solution should mark imported tapes as free, but should not do the same with real, non-expired tapes.

  Read the article

• backup of TFS with DPM 2007 - different backup times

  - by user46516

  I have DPM set up to back up my TFS server every 30 minutes, the reason being it's a way better interface than the quirky SQL backup interface. I also do a full backup nightly using an SQL maintenance job. My thinking is I would use DPM to restore my databases in case of losing my database and the nightly full backup would be a "just in case" the DPM restore doesn't work. I was thinking a little harder about this set up today and started to think about the fact that the DPM backup of the individual databases happens at different 30 min windows.. i.e. one happens at 13h30, another at 13h34 etc. Would this difference in time be a problem when it comes to restoring the TFS server? If I restore the databases and they are from different times, will this create corruption with pointers in one database pointing to missing items in the other database.. do the databases even rely on each other or are they completely interdependant. Lastly, how would SQL (log) backup cope with this?

  Read the article

• Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

  - by Bowsa

  I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to AD objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated! Some further info: Firewalls are disabled on the Server 2008, SBS, and client machines. Manually installing and adding the client in also fails, as the DPM server tries to contact the DC first. Edit: I tried creating a new protection group instead, and it gives a different error upon adding the machines: Following machines are not found in AD: COMPUTERNAME.COMPANYNAME.LOCAL Is there a certain directory structure it follows in AD?

  Read the article

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• Is it possible to backup an SQL Database hosted on an Azure VM, to our internal DPM2012?

  - by Florent Courtay

  I've got an SQL database on an azure VM (non domain) that i'd like to backup to our internal DPM 2012 server. I've installed the DPM agent on the Azure VM, setup DCOM to use only the ports 5000 to 5025 on both the VM and the DPM server, created the 135, 5000-5025, 5718 5719 endpoints on azure and on the VM's firewall. When trying to add this agent to the DPM server, I end up with an error, "Unable to contact the protection Agent on server .cloudapp.net" I know there is some sort of connection between them, as using a wrong password gives me an Invalid Credentials error. The error seems to be DCOM related : When trying to connect to the Azure VM from the DPM server using VBEMTest, i get an Error "0x800706ba The RPC server is unavailable", but access is deneid when using wrong credentials ) What am i missing ? Has someone been able to achieve this kind of setup ? Thanks for your help !

  Read the article

• DPM - Monitoring is green, Protection has error and Latest rec point is old. How do I interpret that?

  - by LosManos

  How do I read the DPM info in this case? Monitoring says Failed but Protection shows Ok while having a Latest recovery point from last year. Under Monitoring tab I have Failed for Source | Computer | Protection group | Start time Computer\System Protection | MyServerName | Recovery point | 2014-06-09 19:00:00 which shows me that something happened last night. But under Protection tab everything is green. Here I have Protection group member | | Protection status Protection group ..name.. Computer: MyServerName Computer\System protection Bare metal recovery OK ... Latest recovery point: 2013-12-12 06:32:54 My guess is that backup failed last night once, but succeeded later. It then found out that there hasn't been any change since sometime last year and leave it be and flags Ok.

  Read the article

1