Search Results

Search found 3 results on 1 pages for 'sidran32'.

Page 1/1 | 1 

  • Synergy client drops and reconnects at UAC dialog

    - by sidran32
    I've been using Synergy for a while at work to connect my XP machine (the host) to my Win 7 laptop (the client). I previously was having issues with using Synergy and the UAC prompt, as described in this question, and have had no issues since, until recently. I upgraded to Synergy 1.4.10 and now am seeing odd behavior whenever a UAC prompt appears on my laptop. When the UAC prompt appears on my laptop, Synergy momentarily drops its connection to my laptop, causing my mouse and keyboard focus to revert to my host machine (the XP machine). After about a second or so, though, the connection gets re-established and I am able to type and use the mouse buttons in the UAC prompt. Once the prompt clears, the connection drops again for a second, and then gets re-established again. Is this something to do with configuration or perhaps should I just chalk it up to a change in behavior in version 1.4.10?

    Read the article

  • Why Both 8GB USB Flash Drives Have Different Integrities?

    - by Boris_yo
    USB 3.0 SuperTalent Express DUO 8GB recently had its partition corrupted and declared itself "write-protected" and I was told in chat by @sidran32 that this usually means that flash drive gone bad due to writing cycles limit being reached. Having this thumbdrive for over a year being used infrequently, I was in doubt and referred to SuperTalent's support. I was given recovery tool which I executed but it failed first time prompting me to reinsert it. After that, I formatted it with Windows 7 integrated format utility since recovery tool offered to do this as well which was successful. The problem as I have noticed is with integrity of SuperTalent: Compare above to SanDisk's Micro Cruzer 8GB: Am I missing something? Both thumbdrives are of 8GB and have same FAT32 file system.

    Read the article

  • BIOS upgrade lowers CPU temperature

    - by N.N.
    Setup I've got a system with an Asus P8Z68-V PRO motherboard and an Intel Core i7-2600K CPU running at stock speed (no overlocking) which I cool with a Noctua NH-U12P. On the heatsink I've got the two included fans connected via the included Low-Noise Adapters (L.N.A.) 1100 RPM, 16.9 dB(A). In the BIOS settings I've set the CPU and chassis fan profile to silent. Issue Yesterday I upgraded from BIOS version 0501 to 0606. After the upgrade I checked the temperatures in the BIOS monitor and was surprised to see that the CPU temperature was slightly ~30°C. Before the upgrade the CPU temperature was ~50°C with the same BIOS settings (see the following heading for details on temperatures). How can this be? It seems a bit odd that a BIOS upgrade can lower the CPU temperature by 20°C and it also seems odd that the CPU temperature is lower than the chassis temperature. Temperatures When I've checked temperatures the room temperature has been ~23°C. I haven't changed the placement of the computer nor the hardware or cooling setup between BIOS versions. BIOS version 0501 BIOS monitor: CPU: ~50°C Chassis: ~33°C I haven't got any temperature measures from lm-sensors or the like for version 0501 because I only discovered the issue after upgrading to version 0606 and the BIOS updater utility won't let me downgrade to version 0501 (it says "outdated image" when I try to load version 0501). BIOS version 0606 BIOS monitor: CPU: ~30°C Chassis: ~33°C lm-sensors in Ubuntu 11.04 Desktop 64-bit (sudo sensors after an uptime of 4 h 52 min and a load average of 0.22, 0.18, 0.15): coretemp-isa-0000 Adapter: ISA adapter Core 0: +32.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +29.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +36.0°C (high = +80.0°C, crit = +98.0°C) The BIOS monitor temperatures was checked directly after the lm-sensors temperatures was checked. BIOS version 0706, 0801, 1101 and 3203 I get the same kind of temperatures both in the BIOS monitor and with lm-sensors in BIOS version 0706, 0801, 1101 and 3203 as in 0606. Information from Asus The 0606 changelog mentions nothing explicitly about CPU temperature (but item 3., as indicated by sidran32, might affect temperatures): P8Z68-V PRO 0606 BIOS with IRST 10.6.0.1002 Enable the support of Intel Rapid Storage Technology version 10.6.0.1002 Release Improve DRAM compatibility Improve System stability Improve compatibility with some Raid card model Increase IGD share memory size to 512MB However the following FAQ might give a hint: FAQs I find that the CPU temperature reading in BIOS is about 10~20 degrees centigrade hotter than the reading in OS. Is it normal? Page Tools Solution That is normal as BIOS does not send idle command to the CPU, making most of the power saving features useless. You should be getting similar reading if you disable EIST/C1E/CPU C3 Report/CPU C6 Report in BIOS.

    Read the article

1