Search Results

Search found 840 results on 34 pages for 'signalr hub'.

Page 1/34 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• USB Hub and Ubuntu

  - by aserwin

  I have a powered 7 port hub connected to my Ubuntu box and it does nothing. The devices (zip drive and web cam) work direct, but aren't recognized through the hub. This worked fine in Windows 7. I can't prove it is the OS because this is a new motherboard and processor. Any advice? EDIT : Output from lsusb -v Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:12.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0503 highspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:13.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:16.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:12.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:13.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:14.5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:16.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 31 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 15 bNumDeviceCaps 1 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 3 Lowest fully-functional device speed is SuperSpeed (5Gbps) bU1DevExitLat 3 micro seconds bU2DevExitLat 2047 micro seconds Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 04a9:1709 Canon, Inc. PIXMA MP150 Scanner Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04a9 Canon, Inc. idProduct 0x1709 PIXMA MP150 Scanner bcdDevice 1.08 iManufacturer 1 Canon iProduct 2 MP150 iSerial 3 20BC24 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 11 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 007 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc517 LX710 Cordless Desktop Laser bcdDevice 38.10 iManufacturer 1 Logitech iProduct 2 USB Receiver iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 98mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 59 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) This is with the powered hub plugged in.

  Read the article

• SignalR cannot read property client of undefined

  - by polonskyg

  I'm trying to add SignalR to my project (ASPNET MVC 4). But I can't make it work. In the below image you can see the error I'm receiving. I've read a lot of stackoverflow posts but none of them is resolving my issue. This is what I did so far: 1) Ran Install-Package Microsoft.AspNet.SignalR -Pre 2) Added RouteTable.Routes.MapHubs(); in Global.asax.cs Application_Start() 3) If I go to http://localhost:9096/Gdp.IServer.Web/signalr/hubs I can see the file content 4) Added <modules runAllManagedModulesForAllRequests="true"/> to Web.Config 5) Created folder Hubs in the root of the MVC application 6) Moved jquery and signalR scripts to /Scripts/lib folder (I'm not using jquery 1.6.4, I'm using the latest) This is my Index.cshtml <h2>List of Messages</h2> <div class="container"> <input type="text" id="message" /> <input type="button" id="sendmessage" value="Send" /> <input type="hidden" id="displayname" /> <ul id="discussion"> </ul> </div> @section pageScripts { <!--Reference the SignalR library. --> <script src="@Url.Content("~/Scripts/jquery.signalR-1.0.0-rc1.min.js")" type="text/javascript"></script> <!--Reference the autogenerated SignalR hub script. --> <script type="text/javascript" src="~/signalr/hubs"></script> <script src="@Url.Content("~/Scripts/map.js")" type="text/javascript"></script> } This is my IServerHub.cs file (located inside Hubs folder) namespace Gdp.IServer.Ui.Web.Hubs { using Microsoft.AspNet.SignalR.Hubs; [HubName("iServerHub")] public class IServerHub : Hub { public void Send(string name, string message) { Clients.All.broadcastMessage(name, message); } } } And this is map.js $(function () { // Declare a proxy to reference the hub. var clientServerHub = $.connection.iServerHub; // Create a function that the hub can call to broadcast messages. clientServerHub.client.broadcastMessage = function (name, message) { $('#discussion').append('<li><strong>' + name + '</strong>:&nbsp;&nbsp;' + message + '</li>'); }; // Get the user name and store it to prepend to messages. $('#displayname').val(prompt('Enter your name:', '')); // Set initial focus to message input box. $('#message').focus(); // Start the connection. $.connection.hub.start().done(function () { $('#sendmessage').click(function () { // Html encode display name and message. var encodedName = $('<div />').text($('#displayname').val()).html(); var encodedMsg = $('<div />').text($('#message').val()).html(); // Call the Send method on the hub. clientServerHub.server.send(encodedName, encodedMsg); // Clear text box and reset focus for next comment. $('#message').val('').focus(); }); }); }); The DLL's I see references for SignalR are: Microsoft.AspNet.SignalR.Core Microsoft.AspNet.SignalR.Owin Microsoft.AspNet.SignalR.SystemWeb Any ideas how to get it work? Should I make any change because the scripts are in /Script/lib folder? NOTE I'm following the instruction found here on how to set up Windsor Castle to make it work with SignalR, and again, seems that the proxy cannot be created and I'm getting the same error: Cannot read property client of undefined meaning that the proxy to the hub was not created This is how I have it in the server public class IncidentServerHub : Hub and like this in the client var clientServerHub = $.connection.incidentServerHub; Again, I can see the dynamically created file here: /GdpSoftware.Server.Web/signalr/hubs So, Why the proxy is not created? Thanks in advance!!! Guillermo.

  Read the article

• SignalR Auto Disconnect when Page Changed in AngularJS

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/05/30/signalr-auto-disconnect-when-page-changed-in-angularjs.aspxIf we are using SignalR, the connection lifecycle was handled by itself very well. For example when we connect to SignalR service from browser through SignalR JavaScript Client the connection will be established. And if we refresh the page, close the tab or browser, or navigate to another URL then the connection will be closed automatically. This information had been well documented here. In a browser, SignalR client code that maintains a SignalR connection runs in the JavaScript context of a web page. That's why the SignalR connection has to end when you navigate from one page to another, and that's why you have multiple connections with multiple connection IDs if you connect from multiple browser windows or tabs. When the user closes a browser window or tab, or navigates to a new page or refreshes the page, the SignalR connection immediately ends because SignalR client code handles that browser event for you and calls the "Stop" method. But unfortunately this behavior doesn't work if we are using SignalR with AngularJS. AngularJS is a single page application (SPA) framework created by Google. It hijacks browser's address change event, based on the route table user defined, launch proper view and controller. Hence in AngularJS we address was changed but the web page still there. All changes of the page content are triggered by Ajax. So there's no page unload and load events. This is the reason why SignalR cannot handle disconnect correctly when works with AngularJS. If we dig into the source code of SignalR JavaScript Client source code we will find something below. It monitors the browser page "unload" and "beforeunload" event and send the "stop" message to server to terminate connection. But in AngularJS page change events were hijacked, so SignalR will not receive them and will not stop the connection. 1: // wire the stop handler for when the user leaves the page 2: _pageWindow.bind("unload", function () { 3: connection.log("Window unloading, stopping the connection."); 4:  5: connection.stop(asyncAbort); 6: }); 7:  8: if (isFirefox11OrGreater) { 9: // Firefox does not fire cross-domain XHRs in the normal unload handler on tab close. 10: // #2400 11: _pageWindow.bind("beforeunload", function () { 12: // If connection.stop() runs runs in beforeunload and fails, it will also fail 13: // in unload unless connection.stop() runs after a timeout. 14: window.setTimeout(function () { 15: connection.stop(asyncAbort); 16: }, 0); 17: }); 18: }   Problem Reproduce In the codes below I created a very simple example to demonstrate this issue. Here is the SignalR server side code. 1: public class GreetingHub : Hub 2: { 3: public override Task OnConnected() 4: { 5: Debug.WriteLine(string.Format("Connected: {0}", Context.ConnectionId)); 6: return base.OnConnected(); 7: } 8:  9: public override Task OnDisconnected() 10: { 11: Debug.WriteLine(string.Format("Disconnected: {0}", Context.ConnectionId)); 12: return base.OnDisconnected(); 13: } 14:  15: public void Hello(string user) 16: { 17: Clients.All.hello(string.Format("Hello, {0}!", user)); 18: } 19: } Below is the configuration code which hosts SignalR hub in an ASP.NET WebAPI project with IIS Express. 1: public class Startup 2: { 3: public void Configuration(IAppBuilder app) 4: { 5: app.Map("/signalr", map => 6: { 7: map.UseCors(CorsOptions.AllowAll); 8: map.RunSignalR(new HubConfiguration() 9: { 10: EnableJavaScriptProxies = false 11: }); 12: }); 13: } 14: } Since we will host AngularJS application in Node.js in another process and port, the SignalR connection will be cross domain. So I need to enable CORS above. In client side I have a Node.js file to host AngularJS application as a web server. You can use any web server you like such as IIS, Apache, etc.. Below is the "index.html" page which contains a navigation bar so that I can change the page/state. As you can see I added jQuery, AngularJS, SignalR JavaScript Client Library as well as my AngularJS entry source file "app.js". 1: <html data-ng-app="demo"> 2: <head> 3: <script type="text/javascript" src="jquery-2.1.0.js"></script> 1:  2: <script type="text/javascript" src="angular.js"> 1: </script> 2: <script type="text/javascript" src="angular-ui-router.js"> 1: </script> 2: <script type="text/javascript" src="jquery.signalR-2.0.3.js"> 1: </script> 2: <script type="text/javascript" src="app.js"></script> 4: </head> 5: <body> 6: <h1>SignalR Auto Disconnect with AngularJS by Shaun</h1> 7: <div> 8: <a href="javascript:void(0)" data-ui-sref="view1">View 1</a> | 9: <a href="javascript:void(0)" data-ui-sref="view2">View 2</a> 10: </div> 11: <div data-ui-view></div> 12: </body> 13: </html> Below is the "app.js". My SignalR logic was in the "View1" page and it will connect to server once the controller was executed. User can specify a user name and send to server, all clients that located in this page will receive the server side greeting message through SignalR. 1: 'use strict'; 2:  3: var app = angular.module('demo', ['ui.router']); 4:  5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10:  11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15:  16: $locationProvider.html5Mode(true); 17: }]); 18:  19: app.value('$', $); 20: app.value('endpoint', 'http://localhost:60448'); 21: app.value('hub', 'GreetingHub'); 22:  23: app.controller('View1Ctrl', function ($scope, $, endpoint, hub) { 24: $scope.user = ''; 25: $scope.response = ''; 26:  27: $scope.greeting = function () { 28: proxy.invoke('Hello', $scope.user) 29: .done(function () {}) 30: .fail(function (error) { 31: console.log(error); 32: }); 33: }; 34:  35: var connection = $.hubConnection(endpoint); 36: var proxy = connection.createHubProxy(hub); 37: proxy.on('hello', function (response) { 38: $scope.$apply(function () { 39: $scope.response = response; 40: }); 41: }); 42: connection.start() 43: .done(function () { 44: console.log('signlar connection established'); 45: }) 46: .fail(function (error) { 47: console.log(error); 48: }); 49: }); 50:  51: app.controller('View2Ctrl', function ($scope, $) { 52: }); When we went to View1 the server side "OnConnect" method will be invoked as below. And in any page we send the message to server, all clients will got the response. If we close one of the client, the server side "OnDisconnect" method will be invoked which is correct. But is we click "View 2" link in the page "OnDisconnect" method will not be invoked even though the content and browser address had been changed. This might cause many SignalR connections remain between the client and server. Below is what happened after I clicked "View 1" and "View 2" links four times. As you can see there are 4 live connections.   Solution Since the reason of this issue is because, AngularJS hijacks the page event that SignalR need to stop the connection, we can handle AngularJS route or state change event and stop SignalR connect manually. In the code below I moved the "connection" variant to global scope, added a handler to "$stateChangeStart" and invoked "stop" method of "connection" if its state was not "disconnected". 1: var connection; 2: app.run(['$rootScope', function ($rootScope) { 3: $rootScope.$on('$stateChangeStart', function () { 4: if (connection && connection.state && connection.state !== 4 /* disconnected */) { 5: console.log('signlar connection abort'); 6: connection.stop(); 7: } 8: }); 9: }]); Now if we refresh the page and navigated to View 1, the connection will be opened. At this state if we clicked "View 2" link the content will be changed and the SignalR connection will be closed automatically.   Summary In this post I demonstrated an issue when we are using SignalR with AngularJS. The connection cannot be closed automatically when we navigate to other page/state in AngularJS. And the solution I mentioned below is to move the SignalR connection as a global variant and close it manually when AngularJS route/state changed. You can download the full sample code here. Moving the SignalR connection as a global variant might not be a best solution. It's just for easy to demo here. In production code I suggest wrapping all SignalR operations into an AngularJS factory. Since AngularJS factory is a singleton object, we can safely put the connection variant in the factory function scope.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Sending Messages to SignalR Hubs from the Outside

  - by Ricardo Peres

  Introduction You are by now probably familiarized with SignalR, Microsoft’s API for real-time web functionality. This is, in my opinion, one of the greatest products Microsoft has released in recent time. Usually, people login to a site and enter some page which is connected to a SignalR hub. Then they can send and receive messages – not just text messages, mind you – to other users in the same hub. Also, the server can also take the initiative to send messages to all or a specified subset of users on its own, this is known as server push. The normal flow is pretty straightforward, Microsoft has done a great job with the API, it’s clean and quite simple to use. And for the latter – the server taking the initiative – it’s also quite simple, just involves a little more work. The Problem The API for sending messages can be achieved from inside a hub – an instance of the Hub class – which is something that we don’t have if we are the server and we want to send a message to some user or group of users: the Hub instance is only instantiated in response to a client message. The Solution It is possible to acquire a hub’s context from outside of an actual Hub instance, by calling GlobalHost.ConnectionManager.GetHubContext<T>(). This API allows us to: Broadcast messages to all connected clients (possibly excluding some); Send messages to a specific client; Send messages to a group of clients. So, we have groups and clients, each is identified by a string. Client strings are called connection ids and group names are free-form, given by us. The problem with client strings is, we do not know how these map to actual users. One way to achieve this mapping is by overriding the Hub’s OnConnected and OnDisconnected methods and managing the association there. Here’s an example: 1: public class MyHub : Hub 2: { 3: private static readonly IDictionary<String, ISet<String>> users = new ConcurrentDictionary<String, ISet<String>>(); 4:  5: public static IEnumerable<String> GetUserConnections(String username) 6: { 7: ISet<String> connections; 8:  9: users.TryGetValue(username, out connections); 10:  11: return (connections ?? Enumerable.Empty<String>()); 12: } 13:  14: private static void AddUser(String username, String connectionId) 15: { 16: ISet<String> connections; 17:  18: if (users.TryGetValue(username, out connections) == false) 19: { 20: connections = users[username] = new HashSet<String>(); 21: } 22:  23: connections.Add(connectionId); 24: } 25:  26: private static void RemoveUser(String username, String connectionId) 27: { 28: users[username].Remove(connectionId); 29: } 30:  31: public override Task OnConnected() 32: { 33: AddUser(this.Context.Request.User.Identity.Name, this.Context.ConnectionId); 34: return (base.OnConnected()); 35: } 36:  37: public override Task OnDisconnected() 38: { 39: RemoveUser(this.Context.Request.User.Identity.Name, this.Context.ConnectionId); 40: return (base.OnDisconnected()); 41: } 42: } As you can see, I am using a static field to store the mapping between a user and its possibly many connections – for example, multiple open browser tabs or even multiple browsers accessing the same page with the same login credentials. The user identity, as is normal in .NET, is obtained from the IPrincipal which in SignalR hubs case is stored in Context.Request.User. Of course, this property will only have a meaningful value if we enforce authentication. Another way to go is by creating a group for each user that connects: 1: public class MyHub : Hub 2: { 3: public override Task OnConnected() 4: { 5: this.Groups.Add(this.Context.ConnectionId, this.Context.Request.User.Identity.Name); 6: return (base.OnConnected()); 7: } 8:  9: public override Task OnDisconnected() 10: { 11: this.Groups.Remove(this.Context.ConnectionId, this.Context.Request.User.Identity.Name); 12: return (base.OnDisconnected()); 13: } 14: } In this case, we will have a one-to-one equivalence between users and groups. All connections belonging to the same user will fall in the same group. So, if we want to send messages to a user from outside an instance of the Hub class, we can do something like this, for the first option – user mappings stored in a static field: 1: public void SendUserMessage(String username, String message) 2: { 3: var context = GlobalHost.ConnectionManager.GetHubContext<MyHub>(); 4: 5: foreach (String connectionId in HelloHub.GetUserConnections(username)) 6: { 7: context.Clients.Client(connectionId).sendUserMessage(message); 8: } 9: } And for using groups, its even simpler: 1: public void SendUserMessage(String username, String message) 2: { 3: var context = GlobalHost.ConnectionManager.GetHubContext<MyHub>(); 4:  5: context.Clients.Group(username).sendUserMessage(message); 6: } Using groups has the advantage that the IHubContext interface returned from GetHubContext has direct support for groups, no need to send messages to individual connections. Of course, you can wrap both mapping options in a common API, perhaps exposed through IoC. One example of its interface might be: 1: public interface IUserToConnectionMappingService 2: { 3: //associate and dissociate connections to users 4:  5: void AddUserConnection(String username, String connectionId); 6:  7: void RemoveUserConnection(String username, String connectionId); 8: } SignalR has built-in dependency resolution, by means of the static GlobalHost.DependencyResolver property: 1: //for using groups (in the Global class) 2: GlobalHost.DependencyResolver.Register(typeof(IUserToConnectionMappingService), () => new GroupsMappingService()); 3:  4: //for using a static field (in the Global class) 5: GlobalHost.DependencyResolver.Register(typeof(IUserToConnectionMappingService), () => new StaticMappingService()); 6:  7: //retrieving the current service (in the Hub class) 8: var mapping = GlobalHost.DependencyResolver.Resolve<IUserToConnectionMappingService>(); Now all you have to do is implement GroupsMappingService and StaticMappingService with the code I shown here and change SendUserMessage method to rely in the dependency resolver for the actual implementation. Stay tuned for more SignalR posts!

  Read the article

• Set Context User Principal for Customized Authentication in SignalR

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/05/27/set-context-user-principal-for-customized-authentication-in-signalr.aspxCurrently I'm working on a single page application project which is built on AngularJS and ASP.NET WebAPI. When I need to implement some features that needs real-time communication and push notifications from server side I decided to use SignalR. SignalR is a project currently developed by Microsoft to build web-based, read-time communication application. You can find it here. With a lot of introductions and guides it's not a difficult task to use SignalR with ASP.NET WebAPI and AngularJS. I followed this and this even though it's based on SignalR 1. But when I tried to implement the authentication for my SignalR I was struggled 2 days and finally I got a solution by myself. This might not be the best one but it actually solved all my problem.   In many articles it's said that you don't need to worry about the authentication of SignalR since it uses the web application authentication. For example if your web application utilizes form authentication, SignalR will use the user principal your web application authentication module resolved, check if the principal exist and authenticated. But in my solution my ASP.NET WebAPI, which is hosting SignalR as well, utilizes OAuth Bearer authentication. So when the SignalR connection was established the context user principal was empty. So I need to authentication and pass the principal by myself.   Firstly I need to create a class which delivered from "AuthorizeAttribute", that will takes the responsible for authenticate when SignalR connection established and any method was invoked. 1: public class QueryStringBearerAuthorizeAttribute : AuthorizeAttribute 2: { 3: public override bool AuthorizeHubConnection(HubDescriptor hubDescriptor, IRequest request) 4: { 5: } 6:  7: public override bool AuthorizeHubMethodInvocation(IHubIncomingInvokerContext hubIncomingInvokerContext, bool appliesToMethod) 8: { 9: } 10: } The method "AuthorizeHubConnection" will be invoked when any SignalR connection was established. And here I'm going to retrieve the Bearer token from query string, try to decrypt and recover the login user's claims. 1: public override bool AuthorizeHubConnection(HubDescriptor hubDescriptor, IRequest request) 2: { 3: var dataProtectionProvider = new DpapiDataProtectionProvider(); 4: var secureDataFormat = new TicketDataFormat(dataProtectionProvider.Create()); 5: // authenticate by using bearer token in query string 6: var token = request.QueryString.Get(WebApiConfig.AuthenticationType); 7: var ticket = secureDataFormat.Unprotect(token); 8: if (ticket != null && ticket.Identity != null && ticket.Identity.IsAuthenticated) 9: { 10: // set the authenticated user principal into environment so that it can be used in the future 11: request.Environment["server.User"] = new ClaimsPrincipal(ticket.Identity); 12: return true; 13: } 14: else 15: { 16: return false; 17: } 18: } In the code above I created "TicketDataFormat" instance, which must be same as the one I used to generate the Bearer token when user logged in. Then I retrieve the token from request query string and unprotect it. If I got a valid ticket with identity and it's authenticated this means it's a valid token. Then I pass the user principal into request's environment property which can be used in nearly future. Since my website was built in AngularJS so the SignalR client was in pure JavaScript, and it's not support to set customized HTTP headers in SignalR JavaScript client, I have to pass the Bearer token through request query string. This is not a restriction of SignalR, but a restriction of WebSocket. For security reason WebSocket doesn't allow client to set customized HTTP headers from browser. Next, I need to implement the authentication logic in method "AuthorizeHubMethodInvocation" which will be invoked when any SignalR method was invoked. 1: public override bool AuthorizeHubMethodInvocation(IHubIncomingInvokerContext hubIncomingInvokerContext, bool appliesToMethod) 2: { 3: var connectionId = hubIncomingInvokerContext.Hub.Context.ConnectionId; 4: // check the authenticated user principal from environment 5: var environment = hubIncomingInvokerContext.Hub.Context.Request.Environment; 6: var principal = environment["server.User"] as ClaimsPrincipal; 7: if (principal != null && principal.Identity != null && principal.Identity.IsAuthenticated) 8: { 9: // create a new HubCallerContext instance with the principal generated from token 10: // and replace the current context so that in hubs we can retrieve current user identity 11: hubIncomingInvokerContext.Hub.Context = new HubCallerContext(new ServerRequest(environment), connectionId); 12: return true; 13: } 14: else 15: { 16: return false; 17: } 18: } Since I had passed the user principal into request environment in previous method, I can simply check if it exists and valid. If so, what I need is to pass the principal into context so that SignalR hub can use. Since the "User" property is all read-only in "hubIncomingInvokerContext", I have to create a new "ServerRequest" instance with principal assigned, and set to "hubIncomingInvokerContext.Hub.Context". After that, we can retrieve the principal in my Hubs through "Context.User" as below. 1: public class DefaultHub : Hub 2: { 3: public object Initialize(string host, string service, JObject payload) 4: { 5: var connectionId = Context.ConnectionId; 6: ... ... 7: var domain = string.Empty; 8: var identity = Context.User.Identity as ClaimsIdentity; 9: if (identity != null) 10: { 11: var claim = identity.FindFirst("Domain"); 12: if (claim != null) 13: { 14: domain = claim.Value; 15: } 16: } 17: ... ... 18: } 19: } Finally I just need to add my "QueryStringBearerAuthorizeAttribute" into the SignalR pipeline. 1: app.Map("/signalr", map => 2: { 3: // Setup the CORS middleware to run before SignalR. 4: // By default this will allow all origins. You can 5: // configure the set of origins and/or http verbs by 6: // providing a cors options with a different policy. 7: map.UseCors(CorsOptions.AllowAll); 8: var hubConfiguration = new HubConfiguration 9: { 10: // You can enable JSONP by uncommenting line below. 11: // JSONP requests are insecure but some older browsers (and some 12: // versions of IE) require JSONP to work cross domain 13: // EnableJSONP = true 14: EnableJavaScriptProxies = false 15: }; 16: // Require authentication for all hubs 17: var authorizer = new QueryStringBearerAuthorizeAttribute(); 18: var module = new AuthorizeModule(authorizer, authorizer); 19: GlobalHost.HubPipeline.AddModule(module); 20: // Run the SignalR pipeline. We're not using MapSignalR 21: // since this branch already runs under the "/signalr" path. 22: map.RunSignalR(hubConfiguration); 23: }); On the client side should pass the Bearer token through query string before I started the connection as below. 1: self.connection = $.hubConnection(signalrEndpoint); 2: self.proxy = self.connection.createHubProxy(hubName); 3: self.proxy.on(notifyEventName, function (event, payload) { 4: options.handler(event, payload); 5: }); 6: // add the authentication token to query string 7: // we cannot use http headers since web socket protocol doesn't support 8: self.connection.qs = { Bearer: AuthService.getToken() }; 9: // connection to hub 10: self.connection.start(); Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• ?12c????RAC Cluster Hub Node-Leaf Node

  - by Liu Maclean(???)

  ?12c?cluster?????????????,?????????????flex cluster?flux asm?? ??Hub Node?Leaf Node,?????Hub Node?Leaf Node. Hub Node????: A node in and Oracle Flex Cluster that is tightly connected with other servers and has direct access to a shared disk. Leaf Node????: Servers that are loosely coupled with Hub Nodes, which may not have direct access to the shared storage. ?????????? Leaf Node??????shared storage ,????leaf node??share disk?? ??Hub Node?12c?????cluster node???, ?Leaf Node????? Leaf Node???: ? Hub Node?? ?????cluster?? ????????Hub Node ????Hub Node????? Hub Node????????????Leaf Node??? ??????????? ?Hub Node????? ??Leaf Node??Flex Cluster???????: hub-and-spoke???cluster?????????? ????Hub Node????OCR?Votedisk ????HUB node???,???????clusterware?????,??ocr?Votedisk ? ?????????????? ??????????,???????? ????????,12???Flex cluster??12?????, ???????? [ n * (n-1)]/2?66?????? ???1000?????,?????????????40?Hub Node,???Hub Node??24?Leaf Node,?Flex Cluster???1740??????  ????,??Cluster??499500?????? ?Flex Cluster??????????????,??cluster software????? ??Hub Node ?? ????????? , ??????????relocate???Hub Node ?Hub Node???Leaf Node??????,????????relocate???Leaf Node? ??Leaf Node?? ?????????,????????relocate????Leaf Node?

  Read the article

• SignalR Server Error "The ConnectionId is in the incorrect format." with SignalR-ObjC Library

  - by ozzotto

  Before asking a separate question I've done lots of googling about it and added a comment in the already existing stackoverflow question. I have a SignalR Hub (tried both v. 1.1.3 and 2.0.0-rc) in my server with the below code: [HubName("TestHub")] public class TestHub : Hub { [Authorize] public void TestMethod(string test) { //some stuff here Clients.Caller.NotifyOnTestCompleted(); } } The problem persists if I remove the Authorize attribute. And in my iOS client I try to call it with the below code: SRHubConnection *hubConnection = [SRHubConnection connectionWithURL:_baseURL]; SRHubProxy *hubProxy = [hubConnection createHubProxy:@"TestHub"]; [hubProxy on:@"NotifyOnTestCompleted" perform:self selector:@selector(stopConnection)]; hubConnection.started = ^{ [hubProxy invoke:@"TestMethod" withArgs:@[@"test"]]; }; //received, error handling [hubConnection start]; When the app starts the user is not logged in and there is no open SignalR connection. The users logs in by calling a Login service in the server which makes use of WebSecurity.Login method. If the login service returns success I then make the above call to SignalR Hub and I get the server error 500 with description "The ConnectionId is in the incorrect format.". The full server stacktrace is the following: Exception information: Exception type: InvalidOperationException Exception message: The ConnectionId is in the incorrect format. at Microsoft.AspNet.SignalR.PersistentConnection.GetConnectionId(HostContext context, String connectionToken) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.Hubs.HubDispatcher.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(IDictionary`2 environment) at Microsoft.Owin.Mapping.MapMiddleware.<Invoke>d__0.MoveNext() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.IntegratedPipelineContext.EndFinalWork(IAsyncResult ar) at System.Web.HttpApplication.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Request information: Request URL: http://myserverip/signalr/signalr/connect?transport=webSockets&connectionToken=axJs EQMZxpmUopL36owSUkdhNs85E0fyB2XvV5R5znZfXYI/CiPbTRQ3kASc3 mq60cLkZU7coYo1P fbC0U1LR2rI6WIvCNIMOmv/mHut/Unt9mX3XFkQb053DmWgCan5zHA==&connectionData=[{"Name":"testhub"}] Request path: /signalr/signalr/connect User host address: User: Is authenticated: False Authentication Type: Thread account name: IIS APPPOOL\DefaultAppPool Thread information: Thread ID: 14 Thread account name: IIS APPPOOL\DefaultAppPool Is impersonating: True Stack trace: at Microsoft.AspNet.SignalR.PersistentConnection.GetConnectionId(HostContext context, String connectionToken) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.Hubs.HubDispatcher.ProcessRequest(HostContext context) at Microsoft.AspNet.SignalR.PersistentConnection.ProcessRequest(IDictionary`2 environment) at Microsoft.Owin.Mapping.MapMiddleware.<Invoke>d__0.MoveNext() --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at Microsoft.Owin.Host.SystemWeb.IntegratedPipeline.IntegratedPipelineContext.EndFinalWork(IAsyncResult ar) at System.Web.HttpApplication.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) I understand this is some kind of authentication and user identity mismatching but up to now I have found no way of solving it. All other questions suggest stoping the opened connection when the user identity changes but as I mentioned above I have no open connection before the user logs in successfully. Any help would be much appreciated. Thank you.

  Read the article

• A first look at SignalR

  - by Rick Strahl

  Last month I finally had a chance to use SignalR in a live project for the first time, and I've been impressed by what this technology offers to .NET developers. It's easy to use and provides rich real-time two way messaging between client and server applications, as well as the ability to broadcast message to all connected clients. This is technology that offers many opportunities to rethink of what we can build with Web applications.

  Read the article

• usb hub not working on resume from suspend

  - by user1781498

  All the usb ports on my laptop work but when I resume from suspend some the usb ports don't work. lsusb Before Suspend: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f3:014b Elan Microelectronics Corp. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 04f2:b3a6 Chicony Electronics Co., Ltd Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb After Suspend: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f3:014b Elan Microelectronics Corp. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• How can I use a value from a session variable as part of the group name in signalR

  - by user1844734

  Hi I am trying to set up signalR to distribute messages to web users the problem is that the one site holds different 'areas' and also 'user types'. The Area is decided when the user visits the site by passing a url parameter, this is then stored in a session variable, The 'user type' is by default not logged in then changed when the user logs in to there user type (returned from a webservice) and stored in a User object. My aim was to connect to the hub using signalR when the user visits the site and add the users connectionId to a groupname, using the 'area id' from the session and the 'user type id' from the User object in the context. The problem I am having is that I can obtain the user id but when it comes to the area id signalR cannot access the session. I understand the reasoning behind not allowing the session available in signalR but does any one know if there is a way to enable this or an alternative way that I can gain access to the users area so that I can create these unique groups.

  Read the article

• CRM@Oracle Series: Showcasing Innovation with Oracle Customer Hub

  - by tony.berk

  When is having too many customers a challenge? It is not something too many people would complain about. But from a data perspective, one challenge is to keep each customer's data consistent across multiple enterprise systems such as CRM, ERP, and all of your other related applications. Buckle your seat belts, we are going a bit technical today... If you have ever tried it, you know it isn't easy. If you haven't, don't go there alone! Customer data integration projects are challenging and, depending on the environment, require sharp, innovative people to succeed. Want to hear from some guys who have done it and succeeded? Here is an interview with Dan Lanir and Afzal Asif from Oracle's Applications IT CRM Systems group on implementing Oracle Customer Hub and innovation. For more interesting discussions on innovation, check out the Oracle Innovation Showcase.

  Read the article

• SignalR Book

  - by eddraper

  Originally posted on: http://geekswithblogs.net/eddraper/archive/2013/06/30/signalr-book.aspx  Just finished SignalR: Real-time Application Development from Packt Publishing.  It’s a really great read for those wanting a holistic view of SignalR as a true application building block.  In many respects I think that SignalR could end up being a game changer for entirely new classes of both apps and frameworks. I’d love to see the puppy plugged into a rich client side ORM…

  Read the article

• Firefox error for signalR, but does not effect anything

  - by anthonypliu

  I get the 2 following errors in firefox when using signalR and I do not know why: Timestamp: 10/15/2012 3:53:48 PM Error: The connection to http://localhost:81/signalr/connect?transport=serverSentEvents&connectionId=84a7f433-0cc8-4baf-93e9-d4c3ca968466&connectionData=%5B%7B%22name%22%3A%22Chat%22%7D%5D&tid=7 was interrupted while the page was loading. Source File: http://localhost:81/Scripts/jquery.signalR-0.5.3.min.js Line: 9 and Timestamp: 10/15/2012 3:53:50 PM Error: no element found Source File: http://localhost:81/signalr/abort?transport=serverSentEvents&connectionId=84a7f433-0cc8-4baf-93e9-d4c3ca968466 Line: 1 Everything seems to work fine with SignalR and my application works as expected across all browsers, but I just get these errors in firefox only. Any ideas?

  Read the article

• What are the performance characteristics of SignalR at scale?

  - by Joel Martinez

  I'm interested in the performance characteristics of SignalR at scale ... particularly, how it behaves at the fringes of capability. When a server is at capacity, what happens? Does it drop messages? Do some clients not get notified? Are messages queued until all are delivered? And if so, will the queue eventually overflow and crash the server? I ask because conducting such a test myself would be impractical, and I'm hoping someone could point me to documentation speaking to this ... or perhaps someone could comment that has seen how SignalR behaves at scale. Thanks! note: I'm familiar with this other stackoverflow question on the stability and scalability of SignalR. But I believe my question is asking a slightly different question in that I'm not concerned with the theoretical scaling limits, I want to know how it behaves when it reaches the limits ... so I know what to be on the lookout for.

  Read the article

• USB Hub powers down in sleep mode on Win 7 64

  - by Andy B

  This question has been asked before but not answered. I would like the USB hub to remain on in sleep so I can wake up the laptop from an external keyboard and mouse. I have set all the device drivers by unchecking allow this device to be powered down and disabled selective suspend in control panel but the hub still powers down. If I plug a keyboard or mouse directly in to the PC they remain powered and wake the computer its only when they are connected through the hub there is a problem. I have another PC running Win 7 32. If I set this up in exactly the same way the hub remains powered in sleep. Both PC's are Toshiba Satellites with multi-core celerons but one runs Win 7 32 the other Win 7 64. BIOS settings are the same. Any help would be appreciated even confirmation that this is a feature of Win 7 64.

  Read the article

• Real-world SignalR example, ditching ghetto long polling

  - by Jeff

  One of the highlights of BUILD last week was the announcement that SignalR, a framework for real-time client to server (or cloud, if you will) communication, would be a real supported thing now with the weight of Microsoft behind it. Love the open source flava! If you aren’t familiar with SignalR, watch this BUILD session with PM Damian Edwards and dev David Fowler. Go ahead, I’ll wait. You’ll be in a happy place within the first ten minutes. If you skip to the end, you’ll see that they plan to ship this as a real first version by the end of the year. Insert slow clap here. Writing a few lines of code to move around a box from one browser to the next is a way cool demo, but how about something real-world? When learning new things, I find it difficult to be abstract, and I like real stuff. So I thought about what was in my tool box and the decided to port my crappy long-polling “there are new posts” feature of POP Forums to use SignalR. A few versions back, I added a feature where a button would light up while you were pecking out a reply if someone else made a post in the interim. It kind of saves you from that awkward moment where someone else posts some snark before you. While I was proud of the feature, I hated the implementation. When you clicked the reply button, it started polling an MVC URL asking if the last post you had matched the last one the server, and it did it every second and a half until you either replied or the server told you there was a new post, at which point it would display that button. The code was not glam: // in the reply setup PopForums.replyInterval = setInterval("PopForums.pollForNewPosts(" + topicID + ")", 1500); // called from the reply setup and the handler that fetches more posts PopForums.pollForNewPosts = function (topicID) { $.ajax({ url: PopForums.areaPath + "/Forum/IsLastPostInTopic/" + topicID, type: "GET", dataType: "text", data: "lastPostID=" + PopForums.currentTopicState.lastVisiblePost, success: function (result) { var lastPostLoaded = result.toLowerCase() == "true"; if (lastPostLoaded) { $("#MorePostsBeforeReplyButton").css("visibility", "hidden"); } else { $("#MorePostsBeforeReplyButton").css("visibility", "visible"); clearInterval(PopForums.replyInterval); } }, error: function () { } }); }; What’s going on here is the creation of an interval timer to keep calling the server and bugging it about new posts, and setting the visibility of a button appropriately. It looks like this if you’re monitoring requests in FireBug: Gross. The SignalR approach was to call a message broker when a reply was made, and have that broker call back to the listening clients, via a SingalR hub, to let them know about the new post. It seemed weird at first, but the server-side hub’s only method is to add the caller to a group, so new post notifications only go to callers viewing the topic where a new post was made. Beyond that, it’s important to remember that the hub is also the means to calling methods at the client end. Starting at the server side, here’s the hub: using Microsoft.AspNet.SignalR.Hubs; namespace PopForums.Messaging { public class Topics : Hub { public void ListenTo(int topicID) { Groups.Add(Context.ConnectionId, topicID.ToString()); } } } Have I mentioned how awesomely not complicated this is? The hub acts as the channel between the server and the client, and you’ll see how JavaScript calls the above method in a moment. Next, the broker class and its associated interface: using Microsoft.AspNet.SignalR; using Topic = PopForums.Models.Topic; namespace PopForums.Messaging { public interface IBroker { void NotifyNewPosts(Topic topic, int lasPostID); } public class Broker : IBroker { public void NotifyNewPosts(Topic topic, int lasPostID) { var context = GlobalHost.ConnectionManager.GetHubContext<Topics>(); context.Clients.Group(topic.TopicID.ToString()).notifyNewPosts(lasPostID); } } } The NotifyNewPosts method uses the static GlobalHost.ConnectionManager.GetHubContext<Topics>() method to get a reference to the hub, and then makes a call to clients in the group matched by the topic ID. It’s calling the notifyNewPosts method on the client. The TopicService class, which handles the reply data from the MVC controller, has an instance of the broker new’d up by dependency injection, so it took literally one line of code in the reply action method to get things moving. _broker.NotifyNewPosts(topic, post.PostID); The JavaScript side of things wasn’t much harder. When you click the reply button (or quote button), the reply window opens up and fires up a connection to the hub: var hub = $.connection.topics; hub.client.notifyNewPosts = function (lastPostID) { PopForums.setReplyMorePosts(lastPostID); }; $.connection.hub.start().done(function () { hub.server.listenTo(topicID); }); The important part to look at here is the creation of the notifyNewPosts function. That’s the method that is called from the server in the Broker class above. Conversely, once the connection is done, the script calls the listenTo method on the server, letting it know that this particular connection is listening for new posts on this specific topic ID. This whole experiment enables a lot of ideas that would make the forum more Facebook-like, letting you know when stuff is going on around you.

  Read the article

• Oracle Customer Hub - Directions, Roadmap and Customer Success

  - by Mala Narasimharajan

   By Gurinder Bahl With less than a week from OOW 2012, I would like to introduce you all to the core Oracle Customer MDM Strategy sessions. Fragmentation of customer data across disparate systems prohibits companies from achieving a complete and accurate view of their customers. Oracle Customer Hub provide a comprehensive set of services, utilities and applications to create and maintain a trusted master customer system of record across the enterprise. Customer Hub centralizes customer data from disparate systems across your enterprise into a master repository. Existing systems are integrated in real-time or via batch with the Hub, allowing you to leverage legacy platform investments while capitalizing on the benefits of a single customer identity. Don’t miss out on two sessions geared towards Oracle Customer Hub:   1) Attend session CON9747 - Turn Customer Data into an Enterprise Asset with Oracle Fusion Customer Hub Applications at Oracle Open World 2012 on Monday, Oct 1st, 10:45 AM - 11:45 AM @ Moscone West – 2008. Manouj Tahiliani, Sr. Director MDM Product Management will provide insight into the vision of Oracle Fusion Customer Hub solutions, and review the roadmap. You will discover how Fusion Customer MDM can help your enterprise improve data quality, create accurate and complete customer information,  manage governance and help create great customer experiences. You will also understand how to leverage data quality capabilities and create a sophisticated customer foundation within Oracle Fusion Applications. You will also hear Danette Patterson, Group Lead, Church Pension Group talk about how Oracle Fusion Customer Hub applications provide a modern, next-generation, multi-domain foundation for managing customer information in a private cloud. 2)  Don't miss session  CON9692 - Customer MDM is key to Strategic Business Success and Customer Experience Management at Oracle Open World 2012 on Wednesday, October 3rd 2012 from 3:30-4:30pm @ Westin San Francisco Metropolitan 1. JP Hurtado, Director, Customer Systems, will provide insight on how RCCL overcame challenges of data quality, guest recognition & centralized customer view to provide consolidated customer view to multiple reservation, CRM, marketing, service, sales, data warehouse and loyalty systems. You will learn how Royal Caribbean Cruise Lines (RCCL), which has over 30 million customer and maintain multiple brands, leveraged Oracle Customer Hub (Siebel UCM) as backbone to customer data management strategy for past 5 years. Gurinder Bahl from MDM Product Management will provide an update on Oracle Customer Hub strategy, what we have achieved since last Open World and our future plans for the Oracle Customer Hub. You will learn about Customer Hub Data Quality capabilities around data analysis, cleansing, matching, address validation as well as reporting and monitoring capabilities. The MDM track at Oracle Open World covers variety of topics related to MDM. In addition to the product management team presenting product updates and roadmap, we have several Customer Panels, and Conference sessions. You can see an overview of MDM sessions here.  Looking forward to see you at Open World, the perfect opportunity to learn about cutting edge Oracle technologies. 

  Read the article

• SignalR - No connection could be made because the target machine actively refused it?

  - by user2151460

  Trying to create a Console application that is going to send data to a website. The website is built with Codeiginter framework, if that matters. When i'm running my Console application, i get the error that a connection could not be made, and that the machine refused it. Been watching some tutorials, but most of them are using Hubs etc, which imo i do not need for this simple task?. All i want to do is to send data to the website, one way. Here is my Console application using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; using Microsoft.AspNet.SignalR; using Microsoft.AspNet.SignalR.Client; namespace signalrDemo { class Program { static void Main(string[] args) { var connection = new Connection("http://localhost:3000/servers/2"); connection.Received += data => Console.WriteLine(data); connection.Start().ContinueWith(task => { if (task.IsFaulted) { Console.WriteLine("Failed to start: {0}", task.Exception.GetBaseException()); } else { Console.WriteLine("Success! Connected with client connection id {0}", connection.ConnectionId); } }); Console.ReadLine(); } } } And at my website, i have this code $(function () { var connection = $.connection('http://localhost/servers/2'); connection.received(function (data) { $("message").append(data + '<br />'); }); connection.start().done(); }); Thank you.

  Read the article

• Self-powered USB hub and power supply adapter ampere capacity

  - by galacticninja

  I am looking for a power supply adapter for my USB Hub so it can support at least 2 bus-powered external hard drives. The hub's rating is 5 volts, 2 amperes. I would like to know if it would be OK to buy a power supply adapter rated at less than 2A. I've been looking for power supply adapters and the ones that do support 2A are more expensive (more expensive than the USB hub itself) compared to those that support less than 2A. Will power supply adapter that supports less than 2A (~1-1.5A) work fine to support two external hard drives? The external hard drives are both bus-powered Western Digital My Passport Essentials 250 GB. The OS is Windows XP SP3.

  Read the article

• Plan your SharePoint 2010 Content Type Hub carefully

  - by Wayne

  Currently setting up a new environment on SharePoint 2010 (which was made available for download yesterday if anyone missed that :-). One of the new features of SharePoint 2010 is to set up a Content Type Hub (which is a part of the Metadata Service Application), which is a hub for all Content Types that other Site Collections can subscribe to. That is you only need to manage your content types in one location. Setting up the Content Type Hub is not that difficult but you must make it very careful to avoid a lot of work and troubleshooting. Here is a short tutorial with a few tips and tricks to make it easy for you to get started. Determine location of Content Type Hub First of all you need to decide in which Site Collection to place your Content Type Hub; in the root site collection or a specific one. I think using a specific Site Collection that only acts as a Content Type Hub is the best way, there are no best practice as of now. So I create a new Site Collection, at for instance http://server/sites/CTH/. The top-level site of this site collection should be for instance a Team Site. You cannot use Blank Site by default, which would have been the best option IMHO, since that site does not have the Taxonomy feature stapled upon it (check the TaxonomyFeatureStapler feature for which site templates that can be used). Configure Managed Metadata Service Application Next you need to create your Managed Metadata Service Application or configure the existing one, Central Administration > Application Management > Manage Service Applications. Select the Managed Metadata service application and click Properties if you already have created it. In the bottom of the dialog window when you are creating the service application or when you are editing the properties is a section to fill in the Content Type Hub. In this text box fill in the URL of the Content Type Hub. It is essential that you have decided where your Content Type Hub will reside, since once this is set you cannot change it. The only way to change it is to rebuild the whole managed metadata service application! Also make sure that you enter the URL correctly. I did copy and paste the URL once and got the /default.aspx in the URL which funked the whole service up. Make sure that you only use the URL to the Site Collection of the hub. Now you have to set up so that other Site Collections can consume the content types from the hub. This is done by selecting the connection for the managed metadata service application and clicking properties. A new dialog window opens and there you need to click the Consumes content types from the Content Type Gallery at nnnn. Now you are free to syndicate your Content Types from the Hub. Publish Content Types To publish a Content Type from the hub you need to go to Site Settings > Content Types and select the content type that you would like to publish. Then select Manage publishing for this content type. This takes you to a page from where you can Publish, Unpublish or Republish the content type. Once the content type is published it can take up to an hour for the subscribing Site Collections to get it. This is controlled by the Content Type Subscriber job that is scheduled to run once an hour. To speed up your publishing just go to Central Administration > Monitoring > Review Job Definitions > Content Type Subscriber and click Run now and you content type is very soon available for use. Published Content Type status You can check the status of the content type publishing in your destination site collections by selecting Site Settings > Content Type Publishing. From here you can force a refresh of all subscribed content types, see which ones that are subscribed and finally check the publishing error log. This error log is very useful for detecting errors during the publishing. For instance if you use any features such as ratings, metadata, document ids in your content type hub and your destination site collection does not have those features available this will be reported here.

  Read the article

• SignalR cross domain does not work after updating to 0.5.1

  - by jlp

  My site uses SignalR to communicate cross-domain. It worked great but I updated SignalR from 0.5.0 to 0.5.1 and my site broke. Here's my script: function start() { $.connection.hub.url = "http://otherdomain.com/signalr"; $.connection.hub.start().done(function () { $.connection.myHub.join(); }); } When script calls join - I see in Firebug that it is a POST (I believe it shoold be GET (jsonp) since it is cross domain) with no response. EDIT: I tried $.connection.hub.start({jsonp: true}). Now I have can call server from client but calls from server don't execute on client. I noticed that there are following calls: negotiate and send whereas locally (the same domain) there are: negotiate, connect, send.

  Read the article

• 2.0 speeds on USB hub?

  - by Matthew Robertson

  How capable are USB hubs? I have an AirPort Extreme router with a printer attached (it's not powered by USB). I want to extend this and add two hard drives (one for Time Machine and the other for EyeTV recordings). Can a 4-port USB hub (I'm considering this one) achieve USB 2.0 speeds and power the hard drives? What difference would a self-powered vs externally-powered hub produce?

  Read the article

• MacBook Air: USB Hub Compatible with the MBA SuperDrive

  - by _ande_turner_

  A little background to those whom may think this Question to specific: The MacBook Air SuperDrive draws 1A vs 500mA of a normal USB device, and therefore you can't use a standard USB hub powered or unpowered because each port gets 500mA not 1A... Have any MacBook Air users found a USB hub which can accommodate the MBA SuperDrive and another peripheral?

  Read the article

• Need a quality USB hub that is able to power external hardware

  - by Jon Erickson

  What is the most useful USB hub that you have had experience with. I have a Seagate FreeAgent Go that is powered by USB and I want to get a USB hub that is able to provide me with more USB ports and can power my harddrive.

  Read the article

• wireless usb hub with the hub on the computer side - does this exist?

  - by Mala

  Hi I'm looking for what is effectively a wireless usb hub, but where the "hubbing" part takes place on the computer-side. In other words, something like this: http://www.iogear.com/product/GUWH104KIT/ Except rather than all four "terminating" slots being connected, having 4 small "wireless terminals" so that the devices can be placed all over a room instead of all within reach of the wireless usb hub Does such a product exist? Thanks!

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >