Search Results

Search found 601 results on 25 pages for 'sony santos'.

Page 1/25 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Controlling Brightness in Sony Vaio SVE151A11W |Not Working|

    - by Rabimba Karanjai
    Disclaimer First: I have gone thorugh these following threads here and followed all of their advice but none of them worked Brightness Control Problem on Sony VAIO with NVIDIA GT-320M unable to change brightness settings in sony vaio e series laptop Brightness doesn't change on Sony laptop Now the Problem I have installed Ubuntu 12.10 (64bit) in this Sony Vaio laptop. After vanilla isntallation the brightness keys are workinga nd I can see the brightness indictaor going up and down buit its isn't having any effect on the real brightness of the device. I have installer additional drivers too but that didn't solve the problem. I can't seem to be able to change the brightness. Anyone knows how I can fix this?

    Read the article

  • Sony Vaio dead keyboard

    - by Filip Górny
    I have strange problem with my almost new laptop. Aftear I leave it turned on for some hours and back to use it, it was printing something like ^[[2~ on the screen and I cannot stop it. After rebooting it did not show any activity. After few hours I managed to turn it on by hiting random keys at keyboard. I starts that way but I have to use external keyboard to type anything. When I randomly stroke the keys when is turned on, it sometimes print that unrecognised characters. It works the same way at linux and windows (ubuntu, windows 7). What can be the reason it started to work so strange and is there anyway to fix it without sending it to warranty and waiting few weeks? :/ I dont remember to make it wet, but they may be something like cigaretes ashes in it, I could not remember...

    Read the article

  • Can't Dual Boot Ubuntu 12.04 and Windows 7 on Sony Vaio S 15 (2012)

    - by Nathaniel
    I just bought my dad a new laptop for fathers day, a Sony Vaio S 15 (the latest models from Sony) and he wants to dual boot Ubuntu and Windows 7. I put Ubuntu 12.04 on a USB drive and went to install it on the computer, but when I got into the partition part of the install there was no option to dual boot. Only to delete everything and install Ubuntu or 'other'. I installed using the 'other' feature by manually partitioning, however once I installed it the computer wouldn't ever go to grub. From inside windows I used Easy BCD to try and fix the boot loader so it would give the option to boot into Windows 7 or Ubuntu 12.04, but it couldn't detect ANY operating systems on the computer (not even windows). Is it not possible to dual boot on the latest Sony Vaios, or is there a workaround for this?

    Read the article

  • Attempting to dual boot Ubuntu and Windows 7 on Sony Vaio with Insyde H2O BIOS

    - by zach
    My situation is the same that is addressed here Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI and here http://www.hackourlife.com/sony-vaio-with-insyde-h2o-efi-bios-ubuntu-12-04-dual-boot I tried to install Ubuntu 12.04 from the Live CD alongside my current Windows 7. I have to switch my BIOS to legacy mode in order to boot from CD. If I were to do a normal installation and remain in legacy mode, the BIOS will display "operating system not found". If I switch back then the BIOS just boots to windows. To solve the problem, I tried following the steps in the previous two articles. My drive is partitioned as: sda1 FAT32 Location of Windows EFI files (flagged as boot in Ubuntu install) sda2 unknown sda3 NFTS Windows C: sda4 ext4 Ubuntu root sda5 swap sda6 ext4 Ubuntu home I was a little confused by the requirement in the second article to "be careful to install Grub bootloader in /dev/sda3" In my case, the relevant partition is sda1. I have tried three things: setting the sda1 mount point as /boot, as /boot/efi, and as the special reserved grub partition. In each install I indicated that grub should be installed in sda1. After each install I reboot to the live CD and look in the sda1. I see EFI/Boot and EFI/Windows, but no EFI/Ubuntu and consequently no grubx64.efi. I understand the recommended procedure of moving grubx64.efi into the EFI/Boot directory and replacing the present bootx64.efi file, but I see no grubx64.efi and I don't know where it should be.

    Read the article

  • unable to change brightness settings in sony vaio e series laptop

    - by yashwanth
    I am using Sony Vaio E Series VPCEH25EN laptop. I installed ubuntu 12.04 64 bit version and I couldn't change my brightness level. Always it is showing max brightness, I tried to change by using echo 0 | sudo tee /sys/class/backlight/acpi_video0/brightness command. When I run the above cmd it showing output as 0 but there is no change in brightness level. please help out how to change brightness levels.

    Read the article

  • Brightness doesn't change on Sony laptop

    - by Eng.amr19
    I installed ubuntu 12.04 on my laptop for first time and every thing work well but the only thing doesn't work is the brightness doesn't change when i press F5 and F6 with Fn So i can't adjust the Brightness and sometimes i need to decrease it for more time working on battery and the bubble appear that it changed but nothing happen my laptop is Sony VAIO series F with NVIDIA GEFORCE ... and NVADIA accelerated graphic driver is activated

    Read the article

  • Problems with graphics of Sony Vaio Z

    - by dpcat237
    Hello, I have problem with my Sony Vaio Z VPCZ1. It has physical selector of GPUs which Linux kernel not detect. So after GRUB I see black display (I tried different distributions of Ubuntu and other Linux OS). I read in Ubuntu 10.10 was solve same problem with hybrid graphics but not in my case ^^ I found solutions (not easy at do) for oldest models. But I'm not expert in Linux and before I prefer ask people with more experience. Somebody can help me? Someone installed Ubuntu in same laptop? PS. for more information I found different webs: http://goo.gl/ktvq Thanks Regards

    Read the article

  • Ubuntu on the Sony Vaio VPCY 21S1E

    - by tiax
    My girlfriend got a new Subnotebook for Christmas (Sony Vayo VPCY21S1E), which comes with an "Intel HD graphics" vga adaptor. When I try to boot the Ubuntu installer from USB, the screen goes blank after a short while, before I even see the Ubuntu logo. However, when I select "nomodeset" in the boot options, I can boot it to the CLI login prompt. When I start X, though, that only works in VESA mode (I've read Intel eventually got rid of Usermode Mode Setting and only offers KMS now, which I've disabled to get it to boot). What can I do to enable a) higher resolution than 1024x768 in VESA b) hardware acceleration for compiz, video playback, etc?

    Read the article

  • Fresh install 12.04 Performance & Stability: SONY VPCCW2S1E

    - by George Katsanos
    just yesterday I installed 12.04. Is it normal that installing a package (Chrome for example) takes 5 to 10 minutes (compared to Windows 7 for example which takes 2 or 3)? (with end result: installation failed) Otherwise is it normal that while the system is doing some installation,extracting packs and so on, other applications often become unresponsive? Sidenote: I don't care about fancy desktop effects, I installed ubuntu to go on and experiment with web servers, memcache, Varnish and git/svn. So basically I plan to do lots of console-only operations. My surprise was also the difference of stability compared to an old FreeBSD installation I had on a dinosaur P3 550Mhz :) (I am on a SONY VPCCW2S1E) (I guess it might have to do something with my problems?)

    Read the article

  • Sony Vaio Webcam

    - by Martin H
    I have a in-built webcam in my Sony Vaio VGN-FE21M. lsusb shows me the device Bus 001 Device 003: ID 0ac8:c002 Z-Star Microelectronics Corp. Visual Communication Camera VGP-VCC1 and it is working within Skype most of the time. Sometimes, however, lsusb shows me the exact same output, but trying to test my cam in v4l2ucp I get the error Unable to open file /dev/video0 No such file or directory A reboot fixes the problem but I just can't pinpoint what the difference is between a working and a not working webcam and the time/instance this occurs. It would probably be a fix if i could unmount and remount the cam, but how can I do this with in-built devices? Any other advice is welcome as well.

    Read the article

  • Ubuntu on AMD based Sony Vaio VPCY B15AG

    - by Gaurav
    Last week I bought a AMD E350 (AMD Fusion platform) based Sony VAIO (VPCYB15AG) having AMD Radeon HD 6310 graphics, I removed Windows that came along with and installed Ubuntu 10.10 (AMD64) using USB drive. During installation my touchpad was not working, I managed through keyboard, but after completing installation & restarting the machine still there was no touchpad support. Also there's no proper graphic card drivers. Even I tried connecting the USB mouse to it but the left key is not working and had to configure the mouse as left-hand to get the left click enabled. I tried searching for any possible solutions for these but found nothing helpful, is there any hope? What should I do to enable i) enable touch pad support ii) get higher resolution 1366x768, etc?

    Read the article

  • HDMI port not recognized on Sony Vaio

    - by julio
    I am running Ubuntu 11.10 64bit with a Sony VAIO VPC F11. It has an NVIDIA GeForce 310M video card, with the latest Nvidia drivers for the 64 bit linux, and a Windows partition with Win7 64bit. NVIDIA driver version is NVIDIA-Linux-x86_64-280.13 External monitor is Samsung SyncMaster P2770 If I boot into the Windows partition, the HDMI works as expected, with sound and video-- under linux, the HDMI port is not recognized at all, apparently, and provides no signal to the attached monitor. The nividia-settings tool does not recognize any monitor connected to the HDMI port. Disper is installed and cannot recognize an attached external monitor. Can anyone help me diagnose this issue and fix it if possible? The laptop has only the one HDMI port to connect any external monitor, so it I can't get this working I'm stuck using either the laptop screen or Windows. Thanks

    Read the article

  • Ubuntu doesn't see my phone (Sony Xperia Tipo)

    - by ola
    When I connect my phone Xperia Tipo to my Ubuntu 12.04, the USB icon does not appear in a launcher. lsusb gives me following results: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 8086:0189 Intel Corp. Bus 001 Device 004: ID 1bcf:2880 Sunplus Innovation Technology Inc. Bus 003 Device 003: ID 0fce:5170 Sony Ericsson Mobile Communications AB I installed Wammu and it does not see phone either: Wammu is now searching for phone: All finished, found 0 phones No phone has been found! On the phone I have debbugging turned on and it sees Ubuntu. Can I ask for instruction step by step? I am a begginer on Ubuntu.

    Read the article

  • How do I get wireless and video working on a Sony Vaio vpc-z21x9r

    - by Alex
    OS: Ubuntu 11.10 Kernel: 2.6.37.6 Laptop: sony vaio vpc-z21x9r The problem: I can't change level of screen backlight; also can't enable wi-fi. While using 3.0 kernel everything is ok, but the laptop discharges too quickly. Results for lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 5f) VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) there is no wlan0 in ifconfig -a too. I've fount that kernel should already have drivers for this graphics controller, but when i load up in restore mode, it writes "fall" while trying to load up some video drivers. To change the level of backlight i've alrady tried: xbacklight -set XX , smartdimmer -s XX and got this init_ nvclock() failed! also sudo setpci -s 00:02.0 F4.B=XX with no results. As for wi-fi, i've found driver but i don't understand how to install it. Here it is How can I fix these problems? Thank you for your help and time! Also tried to fix problems with backlight writing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor Still no results. Is there any sense in recompiling kernel, I mean 2.6.37.6. Can it make any improvements in the situation?

    Read the article

  • Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI

    - by Rohan Dhruva
    I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

    Read the article

  • Sony VAIO is booting directly into Windows without showing grub

    - by Rohan Dhruva
    I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

    Read the article

  • How yo set up a Sony Vaio PCG-4121EM 3G modem?

    - by Ivan
    We've bought a Sony Vaio PCG-4121EM supposed to have a built-in 3G modem. It has a SIM-card slot at its bottom. We've inserted a newly-bought SIM-card but nothing happened and the modem is still not visible among the computer devices (neither in Windows device manager nor in "Modems" Control Panel applet). How to turn it on? I would usually seek to turn a built-in device in the BIOS setup, but there seem to be no BIOS setup on this Vaio - Windows 7 splash screen appears immediately as I turn the computer on.

    Read the article

  • Reproducible freezes with on an AMD fusion (e350) sony vaio

    - by doycho
    So a week ago I bought it and I've been struggling to make the Ubuntu which I installed stable. There's one thing that makes my life miserable, though. There's this easily reproducible freeze when I start some kind of video. So here is what happens: Everything works fine for some time I start vlc/mplayer/flashplayer/totem with something to watch In few minutes time I lose the sound (nothing in the logs at this point) At that time the video app instantly allocates all the memory and its CPU usage skyrockets. Total freeze. I can move the cursor around for few seconds and sometimes even switch to another app. But ultimately there comes the time I can't do anything - can't kill X with ctrl+alt+backspace (I have it enabled), can't switch to any other console (ctrl+alt+f1-6), can't connect to the machine via ssh. The only way to restart it is the ctrl+alt+SysRq+UABI magic :) What discourages me most is the fact I can't see anything in the logs. The only error I've noticed is Jun 19 17:00:37 serenity kernel: [ 1506.350676] software-center[17581]: segfault at 30 ip 00007fd3631b814c sp 00007fff18a6fa10 error 4 in libgtk-x11-2.0.so.0.2400.4[7fd362f7d000+436000]. I've been searching through the Xorg log, kernel logs, syslog. If you have any idea how I can get more debug info I'll be glad to try them. Things I've tried: Changing drivers - the open source one, the proprietary driver xorg-edgers' ppa - https://launchpad.net/~xorg-edgers/+archive/ppa changing to the last stable kernel (2.6.39) Some notes: It my be irrelevant but the sound is constantly stuttering. This probably is a separate issue though I've found that if I start more video/sound apps the freeze happens faster.

    Read the article

  • How to restart boot Windows 7 after upgrading to a SSHD on SONY VAIO with recovery discs?

    - by Boris Okun
    The original HDD on my Sony VAIO still works, but has a damaged sector 0 and I was constantly prompted to replace the HDD because of the imminent failure. I created recovery discs as instructed, used a USB external HDD for complete back up (including Windows image back up). After installing the SSHD and using recovery discs to upload Windows and boot, I am getting the Windows welcome screen. Right after that, I'm getting the following message: Windows couldn't complete the installation. To install Windows on this computer, restart the installation. I have tried repeating the process many times all kinds of different ways and I still receive the same message. Also, when I tried to change to partitioning as the other option offered, I get the message: Windows Setup could not configure Windows to run on this computer's hardware. All troubleshooting for hardware and PCU came out solid. I tried to load the image back up from the external drive, but can't load the driver. The computer doesn't see it. Does anyone have a clue or has encountered something similar?

    Read the article

  • sony vaio laptop - product cycles

    - by Max
    I am interested in buying a sony vaio z series laptop. But I found out that it was already released in january 2010 and doesnt have quad core cpus available. I guess there is a product update due in 2011? Has anyone knowledge of how the product cycles are with sony laptops? E. g. I know that apple updates its macbook pro series somewhat every 9 - 12 months. Is this around the same with sony? I am also wondering if the ssd drives sony uses are any good, but that could be another question...

    Read the article

  • Sony Vaio CPU fan runs at full speed after installing Windows 8.1 preview

    - by greg27
    I installed the Windows 8.1 preview on my Sony Vaio E Series 14P (http://www.sony.com.au/product/sve14a27cg) and now my CPU fan is running at full speed all the time. When I first start my computer it runs normally, but a few seconds after reaching the Windows login screen the fan speed will suddenly jump up to max. It's pretty loud, so I'm hoping there's a solution! I've tried updating my bios to the latest version but that didn't help. I've tried programs like SpeedFan, but that wasn't able to detect my CPU fan at all. My CPU usage and temperature is normal and doesn't warrant the max fan speed. Someone else has reported the issue here: http://answers.microsoft.com/en-us/windows/forum/windows8_1_pr-hardware/sony-vaio-e-series-sve14a35cxh100-fan-throttle/45ec823a-2bc8-43ea-8557-b1a5dd0a6870 Is there any way to fix this without having to refresh/reinstall Windows?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >