Search Results

Search found 12 results on 1 pages for 'tightvncserver'.

Page 1/1 | 1 

• tightvncserver on ubuntu 12.04 server with ubuntu-desktop installed no unity

  - by Leon

  The tight vnc server is running but unity does not get loaded. I changed the xstartup to: unset SESSION_MANAGER . /etc/X11/xinit/xinitrc [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources gnome-session & But still no unity. In wich log file can I look for the errors containing the starting of tightvncserver in combination with gnome and unity? Can somone point me at documentation abou tthe loading/starting sequence of Xserver, windows manager etc.? Is this a known issue?

  Read the article

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• On VirtualBox Guest OS “Could not initialize GLX"

  - by trivelt

  I have a remote build-machine with Jenkins and I'm trying to run GUI application. In Jenkins I installed Xvnc plugin, which uses TightVNC Server, but each build has failed. Earlier, there was a problem with loading driver swrast (by libGL), currently in the log there is this line: [Error] Could not initialize GLX Remote desktop is Ubuntu 14.04 running over VirtualBox, so I installed VBoxAddons but it didn't resolve the problem. Below I'm putting some logs, maybe helpful for you. $ cat /var/log/Xorg.0.log | grep GL [ 20.545] (==) AIGLX enabled [ 20.545] Loading extension GLX [ 20.913] (EE) AIGLX error: vboxvideo does not export required DRI extension [ 20.914] (EE) AIGLX: reverting to software rendering [ 21.615] (II) AIGLX: Loaded and initialized swrast [ 21.615] (II) GLX: Initialized DRISWRAST GL provider for screen 0 $ lsmod | grep box vboxsf 43786 0 vboxpci 23194 0 vboxnetadp 25670 0 vboxnetflt 27613 0 vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci vboxvideo 12658 0 vboxguest 248441 3 vboxsf drm 302817 1 vboxvideo $ lspci | grep VGA 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter Any ideas what should I do?

  Read the article

• How to start vnc server on-demand (not on boot)

  - by QRohlf

  I have a vps which has the basic xfce environment & tightvncserver installed. I would like to have tightvncserver automatically start whenever I initiate a connection to the port it runs on (in my case, 5901). I've seen posts about using inetd or xinetd to do this, but I've also seen lots of posts saying that (x)inetd is not included in Ubuntu for a reason, and that it's a bad idea to use it. Anyways, I'm looking for a way to auto-start tightvncserver whenever there's an incoming connection to port 5901, preferably with as few dependencies as possible

  Read the article

• how to make Chromium-browser start on vnc display?

  - by Oleksandr Dudchenko

  I have started Tightvncserver on Lubuntu 12.04 via the command $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Then I've successfully loged in from remote PC using realvncclient. Trying to start Chromium-browser from menu... no luck. There was one more attempt: I opened the LXTerminal from menu. Trying to start is from terminal with the command /usr/bim/chromium-browser & it returned the message like follows: Xlib: extention "RANDR" missing on desktop :2 I have also discovered that after my two attampts the chromium-browser has created 2 new windows on the host on which was session running on display :0 The Question: How to make the browser start on that display from which it was called (in my occasion from vnc session display)?

  Read the article

• How to change the screen resolution in VNC viewer for Ubuntu 12.04 without a monitor?

  - by user325320

  I have Ubuntu 12.04 installed on a machine and I always use it remotely from VNC. When I have monitor connected to this machine, I can change the resolution of my VNC viewer in the following line: $vnc4server --geometry 1440x900 This worked for me, but I always use this machine remotely, I unplug the monitor and reboot. and the above command line not work anymore. Then I tried xrandr SZ: Pixels Physical Refresh *0 1024 x 768 ( 260mm x 195mm ) *60 Current rotation - normal Current reflection - none Rotations possible - normal Reflections possible - none There is only one option available, so I tried to add a new one. $cvt 1440 900 # 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync $xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync $xrandr --addmode S2 "1440x900_60.00" then I checked with xrandr again and can't see the new mode added. I try to execute the following command and get error says my RandR is too old. $xrandr --output S2 --mode 1440x900_60.00 xrandr: Server RandR version before 1.2 but this does not make sense to me, if I plug in the monitor back and run the xrandr command, it works again! It seems that Ubuntu must conntect to a real monitor before I can change my resolution in my VNC viewer. Can anyone help? UPDATE: Finally I solved this problem by changing to tightvncserver $tightvncserver -geometry 1440x900 works for me. Thanks everything answered my question

  Read the article

• Can't access server sound card when vnc'd into ubuntu server

  - by Corey Kennedy

  I've set up my ubunutu 10 server with xfce, nxserver, and now tightvncserver so that I can control it remotely from my Windows 7 laptop. NX is working fine for remote access, but when I run (for example) exaile, no sound will be sent through the server's sound card. I installed tightvncserver and connected, but ran into the same problem. Exaile opens, sound isn't muted, I can see that sound cards are installed (via cat /proc/asound/cards), but I can't seem to get the remote sessions to access the server's sound card. Also, just to confirm that the sound card was working I hooked up a montior/keyboard to the server and opened a local xfce session. That worked fine. While I had the local session running, I was also able to open a remote session with NXClient and start exaile - which then successfully piped sound to the local card. After disconnecting the monitor/keyboard and moving the box back to its normal spot, though, I was not able to play sound via either an NX or VNC session. Does anyone have any suggestions? Surely it's possible to configure my remote sessions to pipe sound to the server's sound card, right? Or at least get xfce up and running without a monitor or keyboard but with access to the sound card so I can VNC into it? Thanks!

  Read the article

• Ubuntu server 10.04 reboots randomly

  - by martins256

  I have just installed ubuntu server 10.04. For few days it was going ok. But now it reboots randomly once 1-3 hours. I have installed these packadges: lamp, gammu-smsd, gnome-core, tightvncserver The server is Intel SR1625URSASR Which log files I should provide?

  Read the article

• Why does this script not open parallel gnome-terminals on a server?

  - by broiyan

  Why am I not able to have parallel gnome-terminals on my server while I can on my client. Here is a test that illustrates the problem. #!/bin/bash # this is the parent script gnome-terminal --command "./left.sh" sleep 10 gnome-terminal --command "./right.sh" #!/bin/bash echo "this is the left script" read -p "press any key to close this terminal" key #!/bin/bash echo "this is the right script" read -p "press any key to close this terminal" key When I run this on a regular ubuntu desktop (maverick) I see two terminals after 10 seconds. When I run this on a maverick server at a server farm, the second window does not appear until after I close the first one and wait 10 seconds. I am using tightvncserver to view the server desktop. (I could have simplified a bit more. The 10 second sleep is extraneous to the problem. In my real world application I need the first terminal to do some real work before starting the second. The problem probably still exists even if there is no sleep.)

  Read the article

• VNC Server not responsive after a few days

  - by assylias

  I am new to Ubuntu (11.10) - I installed Ubuntu on a box which has no screen and no keyboard. I connect to that box via tightvncserver. The box is mostly used as a file and media server (i.e. samba + XBMC). So far so good. I can connect via VNC to the box and take control of it. But after a few days, when trying to connect via VNC, I don't get a response. The media server is still on, ping is fine, but VNC is down. The only solution I have found is to plug a screen and keyboard and reboot. I am not sure how to diagnose the problem (maybe some log files?) or if this is just a configuration issue. Any help appreciated.

  Read the article

• How to fix "Xlib: extension "RECORD" missing on display :1" in vnc session?

  - by Manish Sapariya

  I am running a JNativeHook capture program on Ubuntu. When I run the session on default X session things are working fine. However when I run the same program from vnc session, it fails with "Xlib: extension "RECORD" missing on display". I checked that this extension is loaded in X which is started by display manager/init. However I am not sure if indeed is initialized during vncserver startup. I could not see anything related in the vnc log. I tried create custom xorg.conf with Module section, which explicitly loads RECORD extension as suggested by many posts but did not help. My environment: Xorg-server: 2.1.12.4-6 tightvncserver: 1.3.9 The same thing works fine on my CentOS 6.4 setup.

  Read the article

• Windows XP to Ubuntu 10.04 via VNC does not refresh

  - by hughdbrown

  I've tried tightvncserver and vnc4server on Ubuntu. I've tried tightvnc viewer and ultravnc viewer on Windows XP. I can connect from Windows to Ubuntu with any combination, but there is no screen refresh: I can drag a window on Ubuntu using my mouse in Windows or type into a terminal in Ubuntu from my keyboard in Windows, but the image does not change on Windows. I can request a screen refresh from Windows but the screen does not update. I am running the ATI driver on Ubuntu. I've tried stepping the System|Preferences|Appearance|Visual Effects down from Extra to Normal with no effect.

  Read the article

1