Search Results

Search found 6346 results on 254 pages for 'turn a'.

Page 1/254 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • techniques for an AI for a highly cramped turn-based tactics game

    - by Adam M.
    I'm trying to write an AI for a tactics game in the vein of Final Fantasy Tactics or Vandal Hearts. I can't change the game rules in any way, only upgrade the AI. I have experience programming AI for classic board games (basically minimax and its variants), but I think the branching factor is too great for the approach to be reasonable here. I'll describe the game and some current AI flaws that I'd like to fix. I'd like to hear ideas for applicable techniques. I'm a decent enough programmer, so I only need the ideas, not an implementation (though that's always appreciated). I'd rather not expend effort chasing (too many) dead ends, so although speculation and brainstorming are good and probably helpful, I'd prefer to hear from somebody with actual experience solving this kind of problem. For those who know it, the game is the land battle mini-game in Sid Meier's Pirates! (2004) and you can skim/skip the next two paragraphs. For those who don't, here's briefly how it works. The battle is turn-based and takes place on a 16x16 grid. There are three terrain types: clear (no hindrance), forest (hinders movement, ranged attacks, and sight), and rock (impassible, but does not hinder attacks or sight). The map is randomly generated with roughly equal amounts of each type of terrain. Because there are many rock and forest tiles, movement is typically very cramped. This is tactically important. The terrain is not flat; higher terrain gives minor bonuses. The terrain is known to both sides. The player is always the attacker and the AI is always the defender, so it's perfectly valid for the AI to set up a defensive position and just wait. The player wins by killing all defenders or by getting a unit to the city gates (a tile on the other side of the map). There are very few units on each side, usually 4-8. Because of this, it's crucial not to take damage without gaining some advantage from it. Units can take multiple actions per turn. All units on one side move before any units on the other side. Order of execution is important, and interleaving of actions between units is often useful. Units have melee and ranged attacks. Melee attacks vary widely in strength; ranged attacks have the same strength but vary in range. The main challenges I face are these: Lots of useful move combinations start with a "useless" move that gains no immediate advantage, or even loses advantage, in order to set up a powerful flank attack in the future. And, since the player units are stronger and have longer range, the AI pretty much always has to take some losses before they can start to gain kills. The AI must be able to look ahead to distinguish between sacrificial actions that provide a future benefit and those that don't. Because the terrain is so cramped, most of the tactics come down to achieving good positioning with multiple units that work together to defend an area. For instance, two defenders can often dominate a narrow pass by positioning themselves so an enemy unit attempting to pass must expose itself to a flank attack. But one defender in the same pass would be useless, and three units can defend a slightly larger pass. Etc. The AI should be able to figure out where the player must go to reach the city gates and how to best position its few units to cover the approaches, shifting, splitting, or combining them appropriately as the player moves. Because flank attacks are extremely deadly (and engineering flank attacks is key to the player strategy), the AI should be competent at moving its units so that they cover each other's flanks unless the sacrifice of a unit would give a substantial benefit. They should also be able to force flank attacks on players, for instance by threatening a unit from two different directions such that responding to one threat exposes the flank to the other. The AI should attack if possible, but sometimes there are no good ways to approach the player's position. In that case, the AI should be able to recognize this and set up a defensive position of its own. But the AI shouldn't be vulnerable to a trivial exploit where the player repeatedly opens and closes a hole in his defense and shoots at the AI as it approaches and retreats. That is, the AI should ideally be able to recognize that the player is capable of establishing a solid defense of an area, even if the defense is not currently in place. (I suppose if a good unit allocation algorithm existed, as needed for the second bullet point, the AI could run it on the player units to see where they could defend.) Because it's important to choose a good order of action and interleave actions between units, it's not as simple as just finding the best move for each unit in turn. All of these can be accomplished with a minimax search in theory, but the search space is too large, so specialized techniques are needed. I thought about techniques such as influence mapping, but I don't see how to use the technique to great effect. I thought about assigning goals to the units. This can help them work together in some limited way, and the problem of "how do I accomplish this goal?" is easier to solve than "how do I win this battle?", but assigning good goals is a hard problem in itself, because it requires knowing whether the goal is achievable and whether it's a good use of resources. So, does anyone have specific ideas for techniques that can help cleverize this AI? Update: I found a related question on Stackoverflow: http://stackoverflow.com/questions/3133273/ai-for-a-final-fantasy-tactics-like-game The selected answer gives a decent approach to choosing between alternative actions, but it doesn't seem to have much ability to look into the future and discern beneficial sacrifices from wasteful ones. It also focuses on a single unit at a time and it's not clear how it could be extended to support cooperation between units in defending or attacking.

    Read the article

  • Turn-based games [closed]

    - by Blue
    I've been looking for tutorials on turn-based games. I found an incomplete tutorial series by InsugentX about turn-based games. I haven't looked through it, but since it's incomplete, I worry that I won't be able to finish the scripts. I'm looking for tutorials or some good tips or advice to create turn-based games(similar to Worms). Recently I finished watching the WalkerBoys' tutorials so I am familiar with code. Where can I find some info and/or tutorials on creating Turn-based games? I'd prefer it to be video format. How can I create turn-based games (not the entire thing, only the set-up) or a turn-based event like in Worms? To explain more, How do I create 2 parties(1st player, 2nd player) exchanging turns(turn-based games and/or hotseat). While parties have characters similar to Worms(having more than 1 character within each party)? Do I use an array, an enum? I don't have any experience in turn-based games, so I would like to know how to actually make turn-based games. I can't find any reference to help me with construction of a turn-based game code similar to Worms in a programming language I can understand.

    Read the article

  • Resources for creating a turn-by-turn navigation system

    - by benwad
    I'm trying to create a kind of turn-by-turn satellite navigation system using the iOS SDK. I get the directions from the server and draw them on the map, then I keep getting location updates from the iPhone's GPS chip. Currently I start by finding the nearest turning point then, each time the user comes within a certain distance of the next turning point, a verbal cue is given and the turning point index is incremented. This is a delicate system and I'd like to make it more robust so I can tell when the user is going the wrong direction etc. Basically I'm looking for some literature about turn-by-turn navigation, in terms of tracking the user's progress and whether they're going the right direction. I'd have thought there's a lot of research out there but I can't seem to find anything apart from simple tutorials on how to use a given SDK or directions API. Can anyone direct me to a good run-through of the various techniques used in software such as TomTom or Google Maps Navigation?

    Read the article

  • Turn Based Event Algorithm

    - by GamersIncoming
    I'm currently working on a small roguelike in XNA, which sees the player in a randomly generated series of dungeons fending off creeps, as you might expect. As with most roguelikes, the player makes a move, and then each of the creeps currently active on screen will make a move in turns, until all creeps have updated, and it return's to the player's go. On paper, the simple algorithm is straightforward: Player takes turn Turn Number increments For each active creep, update Position Once all active creeps have updated, allow player to take next turn However, when it comes to actually writing this in more detail, the concept becomes a bit more tricky for me. So my question comes as this: what is the best way to handle events taking turns to trigger, where the completion of each last event triggers the next, when dealing with a large number of creeps (probably stored as an array of an enemy object), and is there an easier way to create some kind of engine that just takes all objects that need updating and chains them together so their updates follow suit? I'm not asking for code, just algorithms and theory in the direction of objects triggering updates one after the other, in a turn based manner. Thanks in advance. Edited: Here's the code I currently have that is horrible :/ if (player.getTurnOver() && updateWait == 0) { if (creep[creepToUpdate].getActive()) { creep[creepToUpdate].moveObject(player, map1); updateWait = 10; } if (creepToUpdate < creep.Length -1) { creepToUpdate++; } else { creepToUpdate = 0; player.setTurnOver(false); } } if (updateWait > 0) { updateWait--; }

    Read the article

  • How to implement turn-based game engine?

    - by Dvole
    Let's imagine game like Heroes of Might and Magic, or Master of Orion, or your turn-based game of choice. What is the game logic behind making next turn? Are there any materials or books to read about the topic? To be specific, let's imagine game loop: void eventsHandler(); //something that responds to input void gameLogic(); //something that decides whats going to be output on the screen void render(); //this function outputs stuff on screen All those are getting called say 60 times a second. But how turn-based enters here? I might imagine that in gameLogic() there is a function like endTurn() that happens when a player clicks that button, but how do I handle it all? Need insights.

    Read the article

  • How Would I create alternate players (Turn base Event)

    - by Blue
    The picture above shows 2 players. Each containing 3 characters. I want to know how to make a Turn based event starting with player 1 alternating turns with player 2. And in every alternation each character gets a turn. If a character dies, the next character on the same team goes, and so on. How would I create this? Is there a tutorial? I haven't made any turn-based games so I don't know how to program these kinds of stuff.

    Read the article

  • Simultaneous AI in turn based games

    - by Eduard Strehlau
    I want to hack together a roguelike. Now I thought about entity and world representation and got to a quite big problem. If you want all the AI to act simultaneously you would normally(in cellular automa for examble) just copy the cell buffer and let all action of indiviual cells depend on the copy. Actions which are not valid anymore after some cell before the cell you are currently operating on changed the original enviourment(blocking the path) are just ignored or reapplied with the "current"(between turns) environment. After all cells have acted you copy the current map to the buffer again. Now for an environment with complex AI and big(datawise) entities the copying would take too long. So I thought you could put every action and entity makes into a que(make no changes to the environment) and execute the whole que after everyone took their move. Every interaction on this que are realy interacting entities, so if a entity tries to attack another entity it sends a message to it, the consequences of the attack would be visible next turn, either by just examining the entity or asking the entity for data. This would remove problems like what happens if an entity dies middle in the cue but got actions or is messaged later on(all messages would go to null, and the messages from the entity would either just be sent or deleted(haven't decided yet) But what would happen if a monster spawns a fireball which by itself tracks the player(in the same turn). Should I add the fireball to the enviourment beforehand, so make a change to the environment before executing the action list or just add the ball to the "need updated" list as a special case so it doesn't exist in the environment and still operates on it, spawing after evaluating the action list? Are there any solutions or papers on this subject which I can take a look at? EDIT: I don't need information on writing a roguelike I need information on turn based ai in respective to a complex enviourment.

    Read the article

  • how should I network my turn based game?

    - by ddriver1
    I'm writing a very basic turn based strategy game which allows a player to select units and attack enemy units on their turn. The game is written in Java using the slick2d library and I plan to use kyronet for the networking api. I want the game to be networked, but I do not know how I should go about it. My current idea is to connect two users together, and the first one to join the game becomes the game host, while the other becomes the client. However after reading http://gafferongames.com/networking-for-game-programmers/what-every-programmer-needs-to-know-about-game-networking/ it seems my game would be suited to a peer to peer lockstep model. Would that make programming the networking side much easier? Any suggestions on how I should structure my networking would be greatly appreciated

    Read the article

  • Serverside memory efficiency and threading for a turn based game

    - by SkeletorFromEterenia
    Im programming on a turn based war-game for some years now (along with the engine) and Im having quite a hard time at figuring out what the games server architecture should look like, since most game server architecture articles I found focus either on FPS oder MMOGs, which doesn't really fit since I want many matches with 1- 16 players on my server, with each match being played in turn based mode. My chief concern is memory usage, since the most basic approach of loading every game that is being played completely into RAM should be quite inefficient, so is there a suitable strategy for selecting only the needed bits and loading them? Another question I got is how to design the threading on the server, since I think using only a single thread could be a problem due to the fact that the game or part of it might have to be loaded from the database. I would be very happy if you could share your knowledge or point me to material on this topic.

    Read the article

  • How should I structure my turn based engine to allow flexibility for players/AI and observation?

    - by Reefpirate
    I've just started making a Turn Based Strategy engine in GameMaker's GML language... And I was cruising along nicely until it came time to handle the turn cycle, and determining who is controlling what player, and also how to handle the camera and what is displayed on screen. Here's an outline of the main switch happening in my main game loop at the moment: switch (GameState) { case BEGIN_TURN: // Start of turn operations/routines break; case MID_TURN: switch (PControlledBy[Turn]) { case HUMAN: switch (MidTurnState) { case MT_SELECT: // No units selected, 'idle' UI state break; case MT_MOVE: // Unit selected and attempting to move break; case MT_ATTACK: break; } break; case COMPUTER: // AI ROUTINES GO HERE break; case OBSERVER: // OBSERVER ROUTINES GO HERE break; } break; case END_TURN: // End of turn routines/operations, and move Turn to next player break; } Now, I can see a couple of problems with this set-up already... But I don't have any idea how to go about making it 'right'. Turn is a global variable that stores which player's turn it is, and the BEGIN_TURN and END_TURN states make perfect sense to me... But the MID_TURN state is baffling me because of the things I want to happen here: If there are players controlled by humans, I want the AI to do it's thing on its turn here, but I want to be able to have the camera follow the AI as it makes moves in the human player's vision. If there are no human controlled player's, I'd like to be able to watch two or more AI's battle it out on the map with god-like 'observer' vision. So basically I'm wondering if there are any resources for how to structure a Turn Based Strategy engine? I've found lots of writing about pathfinding and AI, and those are all great... But when it comes to handling the turn structure and the game states I am having trouble finding any resources at all. How should the states be divided to allow flexibility between the players and the controllers (HUMAN, COMPUTER, OBSERVER)? Also, maybe if I'm on the right track I just need some reassurance before I lay down another few hundred lines of code...

    Read the article

  • Which algorithm used in Advance Wars type turn based games

    - by Jan de Lange
    Has anyone tried to develop, or know of an algorithm such as used in a typical turn based game like Advance Wars, where the number of objects and the number of moves per object may be too large to search through up to a reasonable depth like one would do in a game with a smaller search base like chess? There is some path-finding needed to to engage into combat, harvest, or move to an object, so that in the next move such actions are possible. With this you can build a search tree for each item, resulting in a large tree for all items. With a cost function one can determine the best moves. Then the board flips over to the player role (min/max) and the computer searches the best player move, and flips back etc. upto a number of cycles deep. Finally it has found the best move and now it's the players turn. But he may be asleep by now... So how is this done in practice? I have found several good sources on A*, DFS, BFS, evaluation / cost functions etc. But as of yet I do not see how I can put it all together.

    Read the article

  • Adobe Air turn based multiplayer Game, sockets vs http bandwidth

    - by Arin Aivazian
    I am developing an Adobe Air multiplayer game for iPad. It is turn based and not realtime. It is like checkers game. I want to use a client server model. I have found 2 options to connect to server so far: socket connection and http requests My question is: Is the bandwidth requirement for socket connection vs http requests different? I need the game to work with very low speed internet connections

    Read the article

  • Turn-Based RPG Battle Instance Layout For Larger Groups

    - by SoulBeaver
    What a title, eh? I'm currently designing a videogame; a turn-based RPG like Final Fantasy (because everybody knows Final Fantasy). It's a 2D sprite game. These are my ideas for combat: -The player has a group of 15 members (main character included) -During battle, five of the group are designated as active, and appear in the battle. -These five may be switched out at leisure, or when one of the five die. -At any time, the Waiting members can cast buffs, be healed by the active members, or perform special attacks. -Battles should contain 10+ monsters at least. I'm aiming for 20, but I'm not sure if that's possible yet. -Battles should feel larger than normal due to the interaction of Waiting members, active members and the increased amount of monsters per battle. -The player has two rows in which to put the Active members: front and back. -Depending on the implementation, I might allow comboing of player attacks and skills. These are just design ideas, so beware! I have not been able to test this out yet- I have no idea yet if any of these ideas bunched together will make for a compelling game. What sounds good on paper doesn't necessarily have to be good in practice! What I'm asking now is how to create the layout for this. My starting point are the battles in Final Fantasy VI, with up to 5-6 monsters on the left and the characters on the right- monsters on both sides if it's a pincer attack. However, this view would not work feasible with my goal of 20 monsters and 5 characters. All the monsters on the left would appear cluttered unless I scale them far far back. If I create a pincer-like map, then there would be no real pincer-attack possible. If I space the monsters out I force the player to scroll the screen- a game mechanic I've come across and not enjoyed imho. My question is: does anybody have any layouts or guides for designing battle maps in turn-based RPGs, especially with a larger number of enemies taken into consideration? How should it look? I am not asking for specific combat mechanics, just the layout for the moment.

    Read the article

  • iOS Game Center - Quit turn-based games for previous version of app

    - by rasmus
    I have a game on the iOS App Store that uses Game Center for turn-based multiplayer (GKTurnBasedMatch). I recently updated the app with a new game mode and I had to change the network protocol for that to happen. As a result I marked my new version as incompatible with the old one. That is, you cannot see the old games within the new app and you cannot initiate a game with someone with the old version of the app. This works as expected. However: The old games remain active after updating. There seems to be no way to quit them. What is worse is that they still count to the maximum number of games you can start. I have been contacted by players that can only start 1-3 games without hitting the roof. Have anyone experienced this before? Is there any way to quit the games? Thanks in advance

    Read the article

  • Turn-based Strategy Loop

    - by Djentleman
    I'm working on a strategy game. It's turn-based and card-based (think Dominion-style), done in a client, with eventual AI in the works. I've already implemented almost all of the game logic (methods for calculations and suchlike) and I'm starting to work on the actual game loop. What is the "best" way to implement a game loop in such a game? Should I use a simple "while gameActive" loop that keeps running until gameActive is False, with sections that wait for player input? Or should it be managed through the UI with player actions determining what happens and when? Any help is appreciated. I'm doing it in Python (for now at least) to get my Python skills up a bit, although the language shouldn't matter for this question.

    Read the article

  • Using idle time in turn-based (RPG) games for updating

    - by The Communist Duck
    If you take any turn based RPG game there will be large periods of time when nothing is happening because the game is looping over 'wait_for_player_input'. Naturally it seems sensible to use this time to update things. However, this immediately seems to suggest that it would need to be threaded. Is this sort of design possible in a single thread? loop: if not check_something_pressed: update_a_very_small_amount else keep going But if we says 'a_very_small_amount' is only updating a single object each loop, it's going to be very slow at updating. How would you go about this, preferably in a single thread? EDIT: I've tagged this language-agnostic as that seems the sensible thing, though anything more specific to Python would be great. ;-)

    Read the article

  • Turn based battle and formula

    - by Mark Chapman
    I'm building a game called DVP(Digimon Virtual Pet), and in this game other than taking care of your digimon, You can also battle and breed them. I'm working on the battle system (making it first cause the actual pet system will be easy compared to the netplay, or 39DLL)but here is the problem I don't want it to be "too" simple or "too" complicated, but I do want to go by a certain formula. There are str, def, spd, and int. Strength: How hard the attacking digimon is hitting Defense: How much damage your digimon can defend when being attacked Speed: The chance of you missing the enemy Intelligence (battle knowledge): The chance of you hitting a critical hit or defending a critical hit. I can make a super simple turn based example, but I don't know how exactly to make the formulas for what I've explained above, any help?

    Read the article

  • Make a turn based system like final fantasy in AS3

    - by Kaoru
    i wanted to make a turn based system like final fantasy tactics. I already created the map, which is 5x5 tiles grid and the characters which is each character places in the end of the tiles. I have 2 teams, which are named Red and Yellow. ------Red-------: First character is at 0,0. Second character is at 0,1. Third character is at0.2, fourth character is at0.3, and the last one is at0.4`. -----Yellow------: First character is at 5.0. Second character is at 5.1. Third character is at 5.2, fourth character is at 5.3, and the last one is at 5.4. I wanted Red team are moving first and make a decision (whether it is attack or wait), and after 5 characters of the Red team is already made a decision, the Yellow team is the one that make a decision (Yellow team is an AI) But, i don't know how to move my characters into the next grid (e.g: from 0,0 to 0,1) by clicking the left mouse button and also how do i display a grid (when select a move selection) that shows how many tiles that the character able to move. Anyone know about this? or how should i know more about this? is there any recommendations books or webs? And also, i don't know how to move the characters using mouse click.

    Read the article

  • Instead of alter table column to turn IDENTITY on and off, turn IDENTITY_INSERT on and off

    - by Kevin Shyr
    First of all, I don't know which version of SQL this post (http://www.techonthenet.com/sql/tables/alter_table.php) is based on, but at least for Microsoft SQL Server 2008, the syntax is not: ALTER TABLE [table_name] MODIFY [column_name] [data_type] NOT NULL; Instead, it should be: ALTER TABLE [table_name] ALTER COLUMN [column_name] [data_type] NOT NULL;   Then, as several posts point out, you can't use T-SQL to run an existing column into an IDENTITY column.  Instead, use the IDENTITY_INSERT to copy data from other tables.  http://msdn.microsoft.com/en-us/library/ms188059.aspx SET IDENTITY_INSERT [table_name] ON INSERT .... SET IDENTITY_INSERT [table_name] OFF     http://www.sqlservercentral.com/Forums/Topic126147-8-1.aspx http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=65257

    Read the article

  • How to build a turn-based multiplayer "real time" server

    - by jmosesman
    I want to build a TCG for mobile devices that is multiplayer over the web (not local wifi or bluetooth). As a player plays cards I want the second player to see what is being played in "real time" (within a few seconds). Only one player can play at a time. Server requirements: 1) Continuously listens for input from Player 1 2) As it receives input from Player 1, sends the message to Player 2 I know some PHP, but it seems like unless I had a loop that continued until I broke it (seems like a bad idea) the script would just receive one input and quit. On the mobile side I know I can open sockets using various frameworks, but what language allows a "stream-like" behavior that continuously listens/sends messages on the server? Or if I'm missing something, what would be the best practice here?

    Read the article

  • Game server for an android/iOS turn-based board-game

    - by Cyril
    I am currently programming an iPhone game and I would like to create an online multiplayer mode. In the future, this app will be port to Android devices, so I was wondering how to create the game-server? First at all, which language should I choose? How to make a server able to communicate both with programs written in objective-c and Java? Then, how to effectively do it? Is it good if I open a socket by client (there'll be 2)? What kind of information should I send to the server? to the clients?

    Read the article

  • Game server for an android/iOS turn-based board-game

    - by Cyril
    I am currently programming an iPhone game and I would like to create an online multiplayer mode. In the future, this app will be port to Android devices, so I was wondering how to create the game-server? First at all, which language should I choose? How to make a server able to communicate both with programs written in objective-c and Java? Then, how to effectively do it? Is it good if I open a socket by client (there'll be 2)? What kind of information should I send to the server? to the clients?

    Read the article

  • Projectiles in tile mapped turn-based tactics game?

    - by Petteri Hietavirta
    I am planning to make a Laser Squad clone and I think I have most of the aspects covered. But the major headache is the projectiles shot/thrown. The easy way would be to figure out the probability of hit and just mark miss/hit. But I want to be able to have the projectile to hit something eventually (collateral damage!). Currently everything is flat 2D tile map and there would be full (wall, door) and half height (desk, chair, window) obstacles. My idea is to draw an imaginary line from the shooter to the target and add some horizontal&vertical error based on the player skills. Then I would trace the modified path until it hits something. This is basically what the original Laser Squad seems to do. Can you recommend any algorithms or other approaches for this?

    Read the article

  • Android - Turn off display without triggering sleep/lock screen - Turn on with Touchscreen

    - by NebulaSleuth
    I have been trying to find a way to turn off the display, and wake up from the user touching the touch screen. The device is in an embedded environment where the device is a tablet and the user does not have access to anything except the touch screen (no buttons at all). It is connected to power so the battery won't be a problem, but when I detect no activity I want to turn off the screen so it isn't staring them in the face all day and doesn't reduce the life the LCD backlight. I maintain a wakelock permanently and decide when to sleep myself. The problem is that when I turn off the screen using : WindowManager.LayoutParams params = getWindow().getAttributes(); params.screenBrightness = 0; getWindow().setAttributes(params); The activity gets paused and stopped. And the unit does not respond to a touch to wake it up. You need to press the power button. At that point the "slide to unlock" shows up. I want to turn off the display, and then stay running so I can detect a touch screen event and turn the display back on. I also tried turning the display to a brightness of 0.1, which works on some devices, but the device I need it to work on, only "dims" the display. I also tried this: // First Remove my FULL wakelock //then aquire a partial wake lock (which should turn off the display) PowerManager.WakeLock wl = manager.newWakeLock(PowerManager.PARTIAL_WAKE_LOCK, "Your Tag"); wl.acquire(); however this method does not turn off the display.

    Read the article

  • AI for a mixed Turn Based + Real Time battle system - Something "Gambit like" the right approach?

    - by Jason L.
    This is maybe a question that's been asked 100 times 1,000 different ways. I apologize for that :) I'm in the process of building the AI for a game I'm working on. The game is a turn based one, in the vein of Final Fantasy but also has a set of things that happen in real time (reactions). I've experimented with FSM, HFSMs, and Behavior Trees. None of them felt "right" to me and all felt either too limiting or too generic / big. The idea I'm toying with now is something like a "Rules engine" that could be likened to the Gambit system from Final Fantasy 12. I would have a set of predefined personalities. Each of these personalities would have a set of conditions it would check on each event (Turn start, time to react, etc). These conditions would be priority ordered, and the first one that returns true would be the action I take. These conditions can also point to a "choice" action, which is just an action that will make a choice based on some Utility function. Sort of a mix of FSM/HFSM and a Utility Function approach. So, a "gambit" with the personality of "Healer" may look something like this: (ON) Ally HP = 0% - Choose "Relife" spell (ON) Ally HP < 50% - Choose Heal spell (ON) Self HP < 65% - Choose Heal spell (ON) Ally Debuff - Choose Debuff Removal spell (ON) Ally Lost Buff - Choose Buff spell Likewise, a "gambit" with the personality of "Agressor" may look like this: (ON) Foe HP < 10% - Choose Attack skill (ON) Foe any - Choose target - Choose Attack skill (ON) Self Lost Buff - Choose Buff spell (ON) Foe HP = 0% - Taunt the player What I like about this approach is it makes sense in my head. It also would be extremely easy to build an "AI Editor" with an approach like this. What I'm worried about is.. would it be too limiting? Would it maybe get too complicated? Does anyone have any experience with AIs in Turn Based games that could maybe provide me some insight into this approach.. or suggest a different approach? Many thanks in advance!!!

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >