Search Results

Search found 18 results on 1 pages for 'umts'.

Page 1/1 | 1 

  • How to configure LAN IP Filter on Huawei E586 UMTS Modem

    - by Mose
    I need to prevent clients of an Huawei E586 UMTS to WiFi modem from downloading much data from specific servers eg. Windows update or OSX update. On the config page of the device there's an "LAN IP Filter" which seems pretty good but I can't figure out the right settings. The mask looks like this: The help pages states the following: My problem with this is, I want some wildcard for the local ip and port. In my opinion the help page can not be correct by "lan port: enter 80" because the source port is normally dynamic. I tried to set it up like stated there but as expected it doesn't work. As wildcards I tried * and "ALL" but nothing worked as it prevents me from saving settings with an "wrong value" error. Any suggestions? Thanks in advance!

    Read the article

  • Puzzling TCP performance over 3G / UMTS

    - by lemonsqueeze
    I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

    Read the article

  • Using 3G/UMTS in Mauritius

    After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

    Read the article

  • rails + sheevaplug = rails home development server and more

    - by microspino
    Hello I'd like to build a "Rails Brick" using a Sheevaplug from Marvell (O.S. is Ubuntu out of the box but You can install other distributions on It). It will be a home server and a silent, low cost (99$) low energy development machine. I'd like to add rails RVM, lot of gems, git-based heroku like deployment, passenger + nginx. This way I could have a portable server with a complete development environment and maybe I could find a hosting company where I can co-locate a grid of this devices or I can sell It as a simple little server for 10 or less users offices, with some centralized rails services (I think to a CMS, a BLOG, a WIKI, calendar or whatever this little jewel could afford). The usb port could make It a print server too or a UMTS link to the web via HUAWEI like usb UMTS keys. Can you give me some hint about: Is this project a crazy-close-to-failure idea? Why? which gem would You include? which rails open source app would you suggest? I have already an Excito Bubba Server at home, I saw the TonidoPlug so It came up in my mind to build something similiar but Rails based (Bubba is PHP based, TonidoPlug I don't know but It does not seems a Rails thing).

    Read the article

  • Connecting to internet via phone on Linux

    - by Bart van Heukelom
    I have a Sony Ericsson C702 phone with a flat fee internet subscription (GPRS/UMTS). I'd like to connect my Linux (Kubuntu 9.04) laptop to internet via this phone, using bluetooth (I also have a cable connection but that's propietary, doubt it'll work). How can I do this, preferably via GUI / NetworkManager / the BT applet that comes with KDE? In Windows I use SE's PC suite software which works great, but is not available for Linux.

    Read the article

  • Turn your laptop into a wireless Access Point with Windows 7!

    - by David Nudelman
    Windows 7 offers a very cool feature where you can connect multiple devices to any wired and wireless network connection (hotel, cable, 3G, UMTS, EDGE, WIFI, RJ45, Ethernet, etc.) by turning your own laptop into a wireless AP (Access Point) to relay those devices not directly connected to the internet. For this just enter these two commands to an elevated (right click on CMD.EXE, run as administrator): netsh wlan set hostednetwork mode=allow ssid=YOURFRIENDLYSSID key=SOMEPASSWORD netsh wlan start hostednetwork At this point, if Internet Connection Sharing (ICS) is setup, anyone can connect to your SoftAP (if they know the PWD of course) and the traffic will be sent through whatever adapter you want. You can actually bridge it across an entirely different adapter... or the same on a different Wifi LAN. A GUI to set this up can be downloaded for free here: http://www.connectify.me/

    Read the article

  • How can you get internet on a train?

    - by Ivan Petrushev
    Hello, There are some rail road companies offering an internet connection to their customers. How can they do it? What kind of internet connection can they have on board a moving vehicle? Satellite connection? I think the train movement will displace a mounted dish and it also will have to be constantly moved around to find the satellite as the train makes turns. Speed isn't greater either. GSM connection - EDGE, UMTS, CSD? 3G coverage often is not an option in rural areas where train goes. These kinds of technologies doesn't offer good speed. WiMax? Wikipedia article on it says it could provide 40Mbps for long distances. Is that what they use mostly? Some kind of power line internet carrier?

    Read the article

  • My computer gets hosted when using 3G

    - by WeaklyTyped
    I recently activated 3G(UMTS) connection on my cellular network. I use Nokia S60 phone as a modem while connecting from Scientific Linux 6. While I am able to access net pretty well, the problem is my computer gets hosted. By using ip-address in a web-browser, anyone can access my localhost (running apache), this never happens with my wireline (ADSL) connection. Furthermore, even the Shell prompt changes from: [mach2@localhost ~]$ to [[email protected] ~]$ where XX.XX.XX.XX is the IP of the 3G connection. The very thought of putting my machine 'in the wild' is disconcerting. How can I rectify the situation without disabling services like apache, sshd and others?

    Read the article

  • CodePlex Daily Summary for Thursday, June 23, 2011

    CodePlex Daily Summary for Thursday, June 23, 2011Popular ReleasesMiniTwitter: 1.70: MiniTwitter 1.70 ???? ?? ????? xAuth ?? OAuth ??????? 1.70 ??????????????????????????。 ???????????????? Twitter ? Web ??????????、PIN ????????????????????。??????????????????、???????????????????????????。Total Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.7b: Total Commander SkyDrive File System Plugin version 0.8.7b. Bug fixes: - BROKEN PLUGIN by upgrading SkyDriveServiceClient version 2.0.1b. Please do not forget to express your opinion of the plugin by rating it! Donate (EUR)SkyDrive .Net API Client: SkyDrive .Net API Client 2.0.1b (RELOADED): SkyDrive .Net API Client assembly has been RELOADED in version 2.0.1b as a REAL API. It supports the followings: - Creating root and sub folders - Uploading and downloading files - Renaming and deleting folders and files Bug fixes: - BROKEN API (issue 6834) Please do not forget to express your opinion of the assembly by rating it! Donate (EUR)Mini SQL Query: Mini SQL Query v1.0.0.59794: This release includes the following enhancements: Added a Most Recently Used file list Added Row counts to the query (per tab) and table view windows Added the Command Timeout option, only valid for MSSQL for now - see options If you have no idea what this thing is make sure you check out http://pksoftware.net/MiniSqlQuery/Help/MiniSqlQueryQuickStart.docx for an introduction. PK :-]HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.2.591 Beta Release: 1.2.591 Beta ReleaseJavaScript Web Resource Manager for Microsoft Dynamics CRM 2011: JavaScript Web Resource Manager (v1.0.521.54): Initial releasepatterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...MapWinGIS ActiveX Map and GIS Component: Second Release Candidate for v4.8: This is the second release candidate for v4.8. This is the ocx installer only, with the new dependancies like GDAL v1.8, GEOS v3.3 and updated libraries for MrSid and ECW.Epinova.CRMFramework: Epinova.CRMFramework 0.5: Beta Release Candidate. Issues solved in this release: http://crmframework.codeplex.com/workitem/593SQL Server HowTo: Version 1.0: Initial ReleaseDropBox Linker: DropBox Linker 1.3: Added "Get links..." dialog, that provides selective public files links copying Get links link added to tray menu as the default option Fixed URL encoding .NET Framework 4.0 Client Profile requiredDotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsTerraria World Viewer: Version 1.4: Update June 21st World file will be stored in memory to minimize chances of Terraria writing to it while we read it. Different set of APIs allow the program to draw the world much quicker. Loading world information (world variables, chest list) won't cause the GUI to freeze at all anymore. Re-introduced the "Filter chests" checkbox: Allow disabling of chest filter/finder so all chest symbos are always drawn. First-time users will have a default world path suggested to them: C:\Users\U...BlogEngine.NET: BlogEngine.NET 2.5 RC: BlogEngine.NET Hosting - Click Here! 3 Months FREE – BlogEngine.NET Hosting – Click Here! This is a Release Candidate version for BlogEngine.NET 2.5. The most current, stable version of BlogEngine.NET is version 2.0. Find out more about the BlogEngine.NET 2.5 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at ...Microsoft All-In-One Code Framework - a centralized code sample library: All-In-One Code Framework 2011-06-19: Alternatively, you can install Sample Browser or Sample Browser VS extension, and download the code samples from Sample Browser. Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for Windows Azure Sample Description Owner CSAzureStartupTask The sample demonstrates using the startup tasks to install the prerequisites or to modify configuration settings for your environment in Windows Azure Rafe Wu ...IronPython: 2.7.1 Beta 1: This is the first beta release of IronPython 2.7. Like IronPython 54498, this release requires .NET 4 or Silverlight 4. This release will replace any existing IronPython installation. The highlights of this release are: Updated the standard library to match CPython 2.7.2. Add the ast, csv, and unicodedata modules. Fixed several bugs. IronPython Tools for Visual Studio are disabled by default. See http://pytools.codeplex.com for the next generation of Python Visual Studio support. See...Facebook C# SDK: 5.0.40: This is a RTW release which adds new features to v5.0.26 RTW. Support for multiple FacebookMediaObjects in one request. Allow FacebookMediaObjects in batch requests. Removes support for Cassini WebServer (visual studio inbuilt web server). Better support for unit testing and mocking. updated SimpleJson to v0.6 Refer to CHANGES.txt for details. For more information about this release see the following blog posts: Facebook C# SDK - Multiple file uploads in Batch Requests Faceb...Candescent NUI: Candescent NUI (7774): This is the binary version of the source code in change set 7774.EffectControls-Silverlight controls with animation effects: EffectControls: EffectControlsNLog - Advanced .NET Logging: NLog 2.0 Release Candidate: Release notes for NLog 2.0 RC can be found at http://nlog-project.org/nlog-2-rc-release-notesNew ProjectsA SharePoint Client Object Model Demo in Silverlight: This demo shows how to utilize the SharePoint 2010 Foundation's Client Object Model within a Silverlight application.Azure SDK Extentions (ja): Azure SDK Tools ????????VS??????????????????。 ??????????????????、????????????????。Bango Apple iOS Application Analytics SDK: Bango application analytics is an analytics solution for mobile applications. This SDK provides a framework you can use in your application to add analytics capabilities to your mobile applications. It's developed in Object C and targets the Apple iOS operating system. Binsembler: Binsembler allows assembler programmers to easily import files into their source code, so that they'll no longer have to use external flash memory just for a few bytes of data. The project is developed in C#.DataTool: Liver.DTEMICHAG: This project contains the .NET Microframework solution for the EMIC Home Automation Gateway (EMICHAG). This project created within the co-funded research project called HOMEPLANE (http://homeplane.org/). html5_stady: html5 DemoJavaScript Web Resource Manager for Microsoft Dynamics CRM 2011: JavaScript Web Resource Manager for Microsoft Dynamics CRM 2011 helps CRM developers to extract javascript web resources to disk, maintain them and import changes back to CRM database. You will no longer have to perform mutliple clicks operation to update you js web resourcesKiefer SharePoint 2010 Templates: The Kiefer Consulting SharePoint 2010 Site Templates allow you to quickly create SharePoint sites pre-configured to meet specific business needs. These sites use only out of the box SharePoint Foundation 2010 features and will run on SharePoint Server 2010 and Office 365.KxFrame: KxFrame is intended to be free, easy-to-use, rapid business application framework. How many times were you starting to develop application from scratch? And every time you say to yourself: "Just this time, next time I'll make some framework"? It's over now! Lets make business application framework together and enjoy creating applications faster than ever.Made In Hell: Small console game. Just a training in code writings.Merula SmartPages: When you want to remember your data in an ASP.NET site after a postback, you will have to use Session or ViewState to remember your data. It’s a lot work to use Session and ViewStates, I just want to declare variables like in a desktop application. So I created a library called Merula SmartPages. This library will remember the properties and variables of your page. MVC ASPX to Razor View Converter: So this project will convert your MVC ASPX pages you worked so hard to make into cshtml files. You simply drop the exe into the folder and it works. I hope you enjoy, thanks! Netduino Utilities: Netduino classes I use with various odds of hardware I have. Hope it's useful ;-) NetEssentialsBugtrackerProject: Bug tracker for telerikPin My Site: Site to help demonstrate pinning capabilities of IE9Python3 ????: Python3 ????RDI Open CTe: RDI Open CTeRDI Open SPED (Contábil): RDI Open SPED (Contábil)RDI Open SPED (Fiscal): RDI Open SPED (Fiscal)sbc: sbcSimply Helpdesk UserControl: Simply Helpdesk is a user control that allows people to embed a helpdesk directly into their active projects. It is design to be as simple as possible, Minimal configuration is required to get it up and running.SQL Server HowTo: Short T-SQL scripts for difficult tasks from everyday job of programmers and database administrators. Also contains links to external resources with such useful information.Stashy: Stash data simply. Stashy is a Micro-NoSql framework. Stashy is a tiny interface, plus four reference implementations, for adding data storage and retrieval to all your .net types. Drop a single stashy class into your application then you can save and load the lot. storeBags01: hacer pedido de bolsos maletas y morrales compra de bolsos y maletas storebags UMTS Net: Program optimizes deployment of UMTS devicesvAddins - A little different addins framework: vAddins transforms C# and VB into powerful scripting languages for making addins or scripts. With this, you no longer need to open Visual Studio or other IDEs, reference assemblies, write the code and then built, move and test... Now you only have to write the code and test!Visual Studio Tags: A Visual Studio extension for tagging your source code files, and then explore your files using the tags.Window Phone Private Media Library: Windows Phone application to protect your media files from unauthorized eyes using your phone.Windows Touch/Mouse/TUIO Multi-touch Gesture recognizer & Trainer: This projects based on Single point Gesture recognizer paper of http://faculty.washington.edu/wobbrock/pubs/uist-07.1.pdf of unistrokes alphabets. The project expand capabilities to allow multi-touch gestures. C# library for rapid use. Mono Client. And C++ Client.WPF, Silverlight PDF viewer: WPF, Silverlight PDF viewer

    Read the article

  • How to install Huawei Mobile broadband EC306?

    - by serviteur
    How to install Huawei Mobile Broadband EC 306 EVDO RevB in Ubuntu 12.04 LTS 64bit ? Best Regards Excuses me for my bad english When I connect the modem on ubuntu, it fails to mount system and furthermore it is not recognized as a CD-ROM. I is not installed Windows on my computer, but I try to open the modem under Windows on a PC friend, There is no script file called "Linux", but only Windows. lsusb : serviteur@creation:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse Bus 001 Device 007: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard dmesg Q: 0 ANSI: 2 [16619.060771] sr1: scsi-1 drive [16619.060955] sr 13:0:0:0: Attached scsi CD-ROM sr1 [16619.061099] sr 13:0:0:0: Attached scsi generic sg3 type 5 [16619.061358] sd 14:0:0:0: Attached scsi generic sg4 type 0 [16619.063654] sd 14:0:0:0: [sdc] Attached SCSI removable disk [16634.224923] usb 1-6: USB disconnect, device number 6 [16638.468041] usb 1-6: new high-speed USB device number 7 using ehci_hcd [16638.586210] option 1-6:1.0: GSM modem (1-port) converter detected [16638.586316] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0 [16638.586435] option 1-6:1.1: GSM modem (1-port) converter detected [16638.586517] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1 [16638.586607] option 1-6:1.2: GSM modem (1-port) converter detected [16638.586676] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2 [16638.586752] option 1-6:1.3: GSM modem (1-port) converter detected [16638.586828] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB3 [16638.586929] option 1-6:1.4: GSM modem (1-port) converter detected [16638.586997] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB4 [16638.587114] option 1-6:1.5: GSM modem (1-port) converter detected [16638.587187] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB5 [16638.646686] option1 ttyUSB5: GSM modem (1-port) converter now disconnected from ttyUSB5 [16638.646706] option 1-6:1.5: device disconnected [16638.660755] scsi15 : usb-storage 1-6:1.5 [16638.663284] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 [16638.663301] option 1-6:1.4: device disconnected [16638.689043] scsi16 : usb-storage 1-6:1.4

    Read the article

  • How do I keep my Huawei E3131 3G modem from unmounting?

    - by John Perez
    I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

    Read the article

  • Multi-WAN bonding across different media

    - by Tom O'Connor
    I've recently been thinking again about a product that Viprinet provide, basically they've got a pair of routers, one that lives in a datacentre, Their VPN Multichannel Hub and the on-site hardware, their VPN multichannel routers They've also got a bunch of interface cards (like HWICs) for 3G, UMTS, Ethernet, ADSL and ISDN adapters. Their main spiel seems to be bonding across different media. It's something that I'd really like to use for a couple of projects, but their pricing is really quite extreme, the hub is about 1-2k, the routers are 2-6k, and the interface modules are 200-600 each. So, what I'd like to know is, is it possible with a couple of stock Cisco routers, 28xx or 18xx series, to do something similar, and basically connect a bunch of different WAN ports, but have it all presented neatly as one channel back to the internet, with seamless (or nearly) failover if one of the WAN interfaces should fail. Basically, If i got 3x 3G to ethernet modems, and each on a different network, I'd like to be able to loadbalance/bond across all of them, without having to pay Viprinet for the privilege. Does anyone know how I'd go about configuring something for myself, based around standard protocols (or vendor specific ones), but without actually having to buy the Viprinet hardware?

    Read the article

  • career in Mobile sw/Application Development [closed]

    - by pramod
    i m planning to do a course on Wireless & mobile computing.The syllabus are given below.Please check & let me know whether its worth to do.How is the job prospects after that.I m a fresher & from electronic Engg.The modules are- *Wireless and Mobile Computing (WiMC) – Modules* C, C++ Programming and Data Structures 100 Hours C Revision C, C++ programming tools on linux(Vi editor, gdb etc.) OOP concepts Programming constructs Functions Access Specifiers Classes and Objects Overloading Inheritance Polymorphism Templates Data Structures in C++ Arrays, stacks, Queues, Linked Lists( Singly, Doubly, Circular) Trees, Threaded trees, AVL Trees Graphs, Sorting (bubble, Quick, Heap , Merge) System Development Methodology 18 Hours Software life cycle and various life cycle models Project Management Software: A Process Various Phases in s/w Development Risk Analysis and Management Software Quality Assurance Introduction to Coding Standards Software Project Management Testing Strategies and Tactics Project Management and Introduction to Risk Management Java Programming 110 Hours Data Types, Operators and Language Constructs Classes and Objects, Inner Classes and Inheritance Inheritance Interface and Package Exceptions Threads Java.lang Java.util Java.awt Java.io Java.applet Java.swing XML, XSL, DTD Java n/w programming Introduction to servlet Mobile and Wireless Technologies 30 Hours Basics of Wireless Technologies Cellular Communication: Single cell systems, multi-cell systems, frequency reuse, analog cellular systems, digital cellular systems GSM standard: Mobile Station, BTS, BSC, MSC, SMS sever, call processing and protocols CDMA standard: spread spectrum technologies, 2.5G and 3G Systems: HSCSD, GPRS, W-CDMA/UMTS,3GPP and international roaming, Multimedia services CDMA based cellular mobile communication systems Wireless Personal Area Networks: Bluetooth, IEEE 802.11a/b/g standards Mobile Handset Device Interfacing: Data Cables, IrDA, Bluetooth, Touch- Screen Interfacing Wireless Security, Telemetry Java Wireless Programming and Applications Development(J2ME) 100 Hours J2ME Architecture The CLDC and the KVM Tools and Development Process Classification of CLDC Target Devices CLDC Collections API CLDC Streams Model MIDlets MIDlet Lifecycle MIDP Programming MIDP Event Architecture High-Level Event Handling Low-Level Event Handling The CLDC Streams Model The CLDC Networking Package The MIDP Implementation Introduction to WAP, WML Script and XHTML Introduction to Multimedia Messaging Services (MMS) Symbian Programming 60 Hours Symbian OS basics Symbian OS services Symbian OS organization GUI approaches ROM building Debugging Hardware abstraction Base porting Symbian OS reference design porting File systems Overview of Symbian OS Development – DevKits, CustKits and SDKs CodeWarrior Tool Application & UI Development Client Server Framework ECOM STDLIB in Symbian iPhone Programming 80 Hours Introducing iPhone core specifications Understanding iPhone input and output Designing web pages for the iPhone Capturing iPhone events Introducing the webkit CSS transforms transitions and animations Using iUI for web apps Using Canvas for web apps Building web apps with Dashcode Writing Dashcode programs Debugging iPhone web pages SDK programming for web developers An introduction to object-oriented programming Introducing the iPhone OS Using Xcode and Interface builder Programming with the SDK Toolkit OS Concepts & Linux Programming 60 Hours Operating System Concepts What is an OS? Processes Scheduling & Synchronization Memory management Virtual Memory and Paging Linux Architecture Programming in Linux Linux Shell Programming Writing Device Drivers Configuring and Building GNU Cross-tool chain Configuring and Compiling Linux Virtual File System Porting Linux on Target Hardware WinCE.NET and Database Technology 80 Hours Execution Process in .NET Environment Language Interoperability Assemblies Need of C# Operators Namespaces & Assemblies Arrays Preprocessors Delegates and Events Boxing and Unboxing Regular Expression Collections Multithreading Programming Memory Management Exceptions Handling Win Forms Working with database ASP .NET Server Controls and client-side scripts ASP .NET Web Server Controls Validation Controls Principles of database management Need of RDBMS etc Client/Server Computing RDBMS Technologies Codd’s Rules Data Models Normalization Techniques ER Diagrams Data Flow Diagrams Database recovery & backup SQL Android Application 80 Hours Introduction of android Why develop for android Android SDK features Creating android activities Fundamental android UI design Intents, adapters, dialogs Android Technique for saving data Data base in Androids Maps, Geocoding, Location based services Toast, using alarms, Instant messaging Using blue tooth Using Telephony Introducing sensor manager Managing network and wi-fi connection Advanced androids development Linux kernel security Implement AIDL Interface. Project 120 Hours

    Read the article

  • Test your internet connection - Emtel Fixed Broadband

    Already at the begin of April, I had a phone conversation with my representative at Emtel Ltd. about some upcoming issues due to the ongoing construction work in my neighbourhood. Unfortunately, they finally raised the house two levels above ours, and of course this has to have a negative impact on the visibility between the WiMAX outdoor unit on the roof and the aimed access point at Medine. So, today I had a technical team here to do a site survey and to come up with potential solutions. Short version: It doesn't look good after all. The site survey Well, the two technicians did their work properly, even re-arranged the antenna to check the connection with another end point down at La Preneuse. But no improvements. Looks like we are out of luck since the construction next door hasn't finished yet and at the moment, it even looks like they are planning to put at least one more level on top. I really wonder about the sanity of the responsible bodies at the local district council. But that's another story. Anyway, the outdoor unit was once again pointed towards Medine and properly fixed with new cable guides (air from the sea and rust...). Both of them did a good job and fine-tuned the reception signal to a mere 3 over 9; compared to the original 7 over 9 I had before the daily terror started. The site survey has been done, and now it's up to Emtel to come up with (better) solutions. Well, I wouldn't mind to have an unlimited, symmetric 3G/UMTS or even LTE connection. Let's see what they can do... Testing the connection There are several online sites available which offer you to check certain aspects of your internet connection. Personally, I'm used to speedtest.net and it works very well. I think it is good and necessary to check your connection from time to time, and only a couple of days ago, I posted the following on Emtel's wall at Facebook (21.05.2013 - 14:06 hrs): Dear Emtel, could you eventually provide an answer on the miserable results of SpeedTest? I chose Rose Hill (Hosted by Emtel Ltd.) as testing endpoint... Sadly, no response to this. Seems that the marketing department is not willing to deal with customers on Facebook. Okay, over at speedtest.net you can use their Flash-based test suite to check your connection to quite a number of servers of different providers world-wide. It's actually very interesting to see the results for different end points and to compare them to each other. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 30.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Fixed Broadband) Speedtest.net result of 30.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Fixed Broadband) Luckily, the results are quite similar in terms of connection speed; which is good. I'm currently on a WiMAX tariff called 'Classic Browsing 2', or Fixed Broadband as they call it now, which provides a symmetric line of 768 Kbps (or roughly 0.75 Mbps). In terms of downloads or uploads this means that I would be able to transfer files in either direction with approximately 96 KB/s. Frankly speaking, thanks to compression, my choice of browser and operating system I usually exceed this value and I have download rates up to 120 KB/s - not too bad after all. Only the ping times are a little bit of concern. Due to the difference in distance, or better said based on the number of hubs between the endpoints, they indicate the amount of time that it takes to send a package from your machine to the remote server and get a response back. A lower value is better, and usually the ping is less than 300 ms between Mauritius and Europe. The alternatives in Mauritius Not sure whether I should note this done because for my requirements there are no alternatives to Emtel WiMAX at the moment. It would be great to have your opinion on the situation of internet connectivity in Mauritius. Are there really alternatives? And if so, what are the conditions?

    Read the article

  • Some mail details about Orange Mauritius

    Being an internet service provider is not easy after all for a lot of companies. Luckily, there are quite some good international operators in this world. For example Orange Mauritius aka Mauritius Telecom aka Wanadoo(?) aka MyT here in Mauritius. The local circumstances give them a quasi-monopol position on fixed lines for telephony and therefore cable-based DSL internet connectivity. So far, not bad but as usual... the details. Just for the records, I am only using the services of Orange for mobile but friends and customers are bound, eh stuck, with other services of Orange Mauritius. And usually, being the IT guy, they get in touch with me to complain about problems or to ask questions on either their ADSL / MyT connection, mail services or whatever. Most of those issues are user-related and easily to solve by tweaking the configuration of their computer a little bit but sometimes it's getting weird. Using Orange ADSL... somewhere else Now, let's imagine we are an Orange ADSL customer for ages and we are using their mail services with our very own mail address like "[email protected]". We configured our mail client like Thunderbird, Outlook Express, Outlook or Windows Mail as publicly described, and we are able to receive and send emails like a champion. No problems at all, the world is green. Did I mention that we have a laptop? Ok, let's take our movable piece of information technology and visit a friend here on the island. Not surprising, he is also customer of Orange, so we can read and answer emails. But Orange is not the online internet service provider and one day, we happen to hang out with someone that uses Emtel via WiMAX or UMTS.. And the fun starts... We can still receive and read emails from our Orange mail account and the IT world is still bright but try to send mails to someone outside the domain "@intnet.mu" or "@orange.mu". Your mail client will deny sending mail with SMTP message 5.1.0 "blah not allowed". First guess, there is problem with the mail client, maybe magically the configuration changed over-night. But no it is still working at home... So, there is for sure a problem with the guy's internet connection. At least, it is his fault not to have Orange internet services, so it can not work properly... The Orange Mail FAQ After some more frustation we finally checkout the Orange Mail FAQ to see whether this (obviously?) common problem has been described already. Sorry, but those FAQ entries are even more confusing as it is not really clear how to handle this scenario. Best of all is that most of the entries are still refering to use servers of the domain "intnet.mu". I mean Orange will disable those systems in favour of the domain "orange.mu" in the near future and does not amend their FAQs. Come on, guys! Ok, settings for POP3 are there. Hm, what about the secure version POP3S? No signs at all... Even changing your mail client to use password encryption with STARTTLS is not allowed at all. Use "bow.intnet.mu" for incoming mail... Ahhh, pretty obvious host name. I mean, at least something like pop.intnet.mu or pop3.intnet.mu would have been more accurate. Funny of all, the hostname "pop.orange.mu" is accessible to receive your mail account. Alright, checking SMTP options for authentication or other like POP-before-SMTP or whatever well-known and established mechanism to send emails are described. I guess that spotting a whale or shark in Mauritian waters would be easier. Trial and error on SMTP settings reveal that neither STARTTLS or any other connection / password encryption is available. Using SSL/TLS on SMTP only reveals that there is no service answering your request. Calling customer service So, we have to bite into the bitter apple and get in touch with Orange customer service and complain/explain them our case and ask for advice. After some hiccups, we finally manage to get hold of someone competent in mail services and we receive the golden spoon of mail configuration made by Orange Mauritius: SMTP hostname: smtpauth.intnet.mu And the world of IT is surprisingly green again. Customer satisfaction? Dear Orange Mauritius, what's the problem with this information? Are you scared of mail spammer? Why isn't there any case in your FAQs? Ok, talking about your FAQs - simply said: they are badly outdated! Configure your mail client to use server name based in the domain intnet.mu but specify your account username with orange.mu as domain part. Although, that there are servers available on the domain orange.mu after all. So, why don't you provide current information like this: POP3 server name: pop.orange.muSMTP server name: smtp.orange.muSMTP authenticated: smtpauth.orange.mu It's not difficult, is it? In my humble opinion not really and you would provide clean, consistent and up-to-date information for your customers. This would produce less frustation and so less traffic on your customer service lines. Which after all, would improve the total user experience and satisfaction level on both sides. Without knowing these facts. Now, imagine you would take your laptop abroad and have to use other internet service providers to be able to be online... Calling your customer service would be unnecessary expensive!

    Read the article

  • cannot connect with huawei e173 after upgrade to 12.10 using network manager

    - by user104195
    Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

    Read the article

1