Search Results

Search found 17 results on 1 pages for 'velociraptor'.

Page 1/1 | 1 

  • 10,000 RPM HDD (WD VelociRaptor) vs SSD for OS?

    - by GiH
    I currently have a 10,00RPM 150GB Raptor that I use for Vista. I'm about to upgrade to Windows 7, and while doing that I thought I'd buy another drive and install Ubuntu 9.10 on it. I don't want to partition the current drive I have, but I don't need 150GB for another OS. So, I'm having trouble deciding whether its worth it to buy a 64 GB SSD at the same price point as the 150GB WD VelociRaptor? Or should I just get a 7,200 RPM drive for really cheap (around $50)? Would it be better to use an SSD for the OS than a mechanical drive? I could always get a 32GB SSD too... Oh, and I don't want to virtualize Ubuntu because I'm going to be testing to see the differences in networking and overall performance.

    Read the article

  • Fibonacci using SBN in OISC in Machine Language

    - by velociraptor
    Hello, I want to generate fibonacci series using SBN in an OISC architecture. My initial approach is to implement it in assembly language first and then convert it to machine language. The first steps involve storing 0 and 1 in 2 registers and then subtract 1 from 0 and repeatedly subtract 1 in the consequent steps. Everytime it will generate a negative number and since its negative, it branches off and fetches the absolute value finding instruction. Is my approach correct? My confusion in the meaning of OISC. Correct me if i'm wrong, if i perform a subtraction and then an absolute value finding, it means that that i'm using 2 instructions everytime. or is it that in the OISC processor both these instructions are done at the sametime which would mean that my approach is correct. Please help. thank you all

    Read the article

  • setting up Windows 2008 STD EN on dedicated server

    - by sunny
    Dear experts, I just purchased a dedicated server and i need to setup for hosting my website. Please help me how do i setup the server step by step. server details : Windows 2008 STD EN SQL Server Web 2008 Core2 Quad 2.4GHz 6GB RAM Single-Power 150GB Velociraptor 10K RPM Please help me for : 1.Setting up server and hosting website 2.Email settings 3.How to set DNS as domain is from another host. regards, Sunny

    Read the article

  • Setup was unable to create a new system partition or locate an existing system partition

    - by PearlFactory
    Have got a new kickn server as new DEV machine It has got two 3ware 9650 Cached Controllers with 8 x 300gig Velociraptor Drives First Problem was the 9.5.1.1 drivers Had to press F8 as soon as the Win 2008 r2 server cd started to load. Once in Adavanced Startup options Disable Driver Signing options Next Issue was I got everything running and accidently selected wrong raid part to do install once I restarted All I would get after waiting the 10 mins for the reboot to start & loading the driver was "setup was unable to create a new system partition or locate an existing system partition"  Finally after about 1 hour I removed all drives apart from the 2 needed for system part on cont 0 deleted system part and recreated this RAID1 mirror. (ALso make sure all USB drives are out on boot..only add them when browsing  the driver to be added )  Restarted loaded driver selected install and Once system is up I will go back and add drives and new parts on both controllers AT least I did not get stuck for a day as is the norm..lol

    Read the article

  • How to hide a partition?

    - by snark
    I bought a small 32 GB SSD to store the operating system (Windows 7) and my applications. I'll copy the existing boot partition (30 GB) from my harddisk (WD Velociraptor) to the SSD using GParted but I'd like to keep the existing partition intact (keeping all data on it) so I can go back to it if there is a problem with the SSD. How can I hide the partition so it is not visible anymore to Windows? What should I change with GParted? Second question: how can I keep the harddisk partition synced with the SSD so I have a backup? I'm looking for a near real-time solution (not something like Acronis Drive Image).

    Read the article

  • Ubuntu 12.04 LTX Install Problems (See post for system build details.)

    - by Lokitez
    This is my first ever attempt at working with Ubuntu. I have only ever installed Windows in the past and that may be the problem. I purchased all new hardware this week and I would really like to give Ubuntu a chance (especially since I don't want to buy another Windows license). First, the hardware: AMD FX-8150 Zambezi 3.6GHz Socket AM3+ 125W Eight-Core Desktop Processor ASUS Crosshair V Formula AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard SAMSUNG 830 Series MZ-7PC128D/AM 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) - This is my intended boot drive. Western Digital VelociRaptor WD5000HHTZ 500GB 10000 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive - This is a backup drive that I have installed Windows Vista on until I can get Ubuntu to work. G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) ASUS HD7850-DC2-2GD5 Radeon HD 7850 2GB 256-bit GDDR5 PCI Express 3.0 x16 I have downloaded and tried to install both Ubuntu 64 bit and Kubuntu 64 bit (both 12.04). Both will always fail to copy a file during install or otherwise lockup during install to the SSD. I have burned two copies of the Ubuntu 12.04 and had the install fail with both. I have installed Vista onto the HDD. Is it possible to mount the Ubuntu file into

    Read the article

  • Windows 2008 Server on VMWare (hardware)

    - by Bill
    I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

    Read the article

  • Setup for NEW HDD?

    - by Ed Markey
    Building my FIRST computer. Will start with at least - one HDD, I purchased a WD SATA HDD a 10,000RPM VelociRaptor 500GB. I have read that if you use one of the settings, can't remember what it's called, that it would make an HDD rund at IDE speeds??? Could I or should I run it in RAID instead? Is RAID only for more than one HDD/ssd? I would like to get like a 64GB SSD later to maybe speed things up working together. Thanks

    Read the article

  • How to find virtualization performance bottlenecks?

    - by Martin
    We have recently started moving our C++ build server(s) from real machines into VMs. (MS Hyper-V) We have some performance issues that I've currently no idea how to address. We have: Test-Box - this is a piece of desktop workstation hardware my co-worker used to set up the VM before we moved it to the actual server hardware Srv-Box - this is the server hardware Test-Box-Real - This is Windows running directly on the Test-Box HW Test-Box-VM - This is Windows in a Hyper-V VM on the Test-Box HW Srv-Box-Real- This is Server2008R2 running on the Srv-Box HW. Srv-Box-VM- This is Windows running in a Hyper-V VM on the Srv-Box HW, i.e. on Srv-Box-Real. Now, the problem is that we compared Build times between Test-Box-Real and Test-Box-VM and they were basically equal (within about 2%). Then we moved the VM to the Srv-Box machine and what we saw there is that we have a significant performance degradation between Srv-Box-Real and Srv-Box-VM, that is, where we saw no differences on the Test HW we now do see major differences in performance on the actual Server HW. (Builds about ~~ 50% slower inside the VM.) I should add that both the Test-Box and the Srv-Box are only running this one single VM and doing nothing else. I should also note that the "Real" OS is Win2008R2(64bit) and the VM hosted OS is Wind2003R2(32bit). Hardware specs: Srv-Box: Intel XEON E5640 @ 2.67Ghz (This means 8 cores with hyperthreading on the Real system and "only" 4 cores on the VM, since Hyper-V doesn't allow for hyperthreading, but number of cores doesn't seem to explain the problem here.) 16GB RAM (we have 4GB assigned to the VM) Virtual DELL RAID 1 (2x 450GB HUS156045VLS600 Hitachi 15k SAS drives) Test-Box: Intel XEON E31245 @ 3.3GHz 16GB RAM WD VelociRaptor 600GB 10k RPM SATA Note again that I'm only concerned with the differences between Srv-Box-Real and Srv-Box-VM (high) vs. the differences seen btw. Test-Box-Real and Test-Box-VM (low). Why would one machine have parity when comparing VM vs Real performance and the other (server grade HW no less) would have a large disparity? (Both being XEON CPUs ...)

    Read the article

  • Internal disk not correctly recognised by Windows 7

    - by david
    i'm having problems configuring a disk in a brand new, clean windows-7 install. here are some system specifics- . disk- western digital velociraptor wd6000hlhx . mobo- gigabyte z77x-ud3h . bios sata-mode set to ahci [not raid], w/disk connected to sata0 [6gb/s hi-speed sata]. . windows 7 enterprise sp1 x64 the disk is recognized by bios and correctly identified [name & size ok]. the disk is also recognized by windows on a h/w level, but it won't show up in the explorer. windows reports the device is working correctly. windows disk manager shows the drive, but says it's uninitialized and has no partitions [which is incorrect]. if i try to initialize the drive, windows throws an error saying that it "cannot find the file specified". [which file???] before connecting the drive to the new machine, i partitioned and formatted the disk under windows xp sp2, giving it 2 partitions [mbr, not gpt] and copying over a boatload of data. obviously none of this appears under windows 7. removing the disk from the new machine and replacing it back in the windows xp machine shows the disk and all data are intact and functional. i'd like to have windows 7 recognize the disk w/o having to lose the data and start over. is this possible? if so, how would i do that? I checked this post, but even though the problem seems identical, the information didn't help. any help appreciated. thanks!

    Read the article

  • Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

    - by david
    I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

    Read the article

  • Problems with Windows 7 restore

    - by Chris Lively
    My WD raptor 150 failed with a nice clicking noise. So, I picked up a velociraptor 300 and popped it in. I had windows set to do a full system backup nightly, so I figured the recovery ought to go easily. Well, it isn't. It is currently stuck on a screen that says: "Windows is restoring your computer from the system image. This might take from a few minutes to a few hours" Below that is a rather large progress meter with maybe the first block filled in. Below that is a message that says "Restoring disk (C:)..." It's been that way for over an hour. The first time around, I gave up after 2 hours. I then booted into the system recovery options and went to a command prompt and ran a chkdsk on the new drive. It showed several file inconsistencies and not much else. I ran a chkdsk /f on it and tried again... Which is where I'm at now. I can't see that the restore process should take this long before. Any ideas? UPDATE After 10 hours, it's still on "Restoring disk (C:)" and the progress meter is at roughly 5%. I'm guessing at the 5% as there isn't an actual number or anything else that I can look at showing what it's actually doing. The backup contains roughly 120GB of data. How slow is windows restore?

    Read the article

  • Windows 7 Won't Boot

    - by Vie
    I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

    Read the article

  • Screen randomly goes blue/black/white

    - by FubsyGamer
    Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

    Read the article

  • Do we still have a case against the goto statement? [closed]

    - by FredOverflow
    Possible Duplicate: Is it ever worthwhile using goto? In a recent article, Andrew Koenig writes: When asked why goto statements are harmful, most programmers will say something like "because they make programs hard to understand." Press harder, and you may well hear something like "I don't really know, but that's what I was taught." For that reason, I'd like to summarize Dijkstra's arguments. He then shows two program fragments, one without a goto and and one with a goto: if (n < 0) n = 0; Assuming that n is a variable of a built-in numeric type, we know that after this code, n is nonnegative. Suppose we rewrite this fragment: if (n >= 0) goto nonneg; n = 0; nonneg: ; In theory, this rewrite should have the same effect as the original. However, rewriting has changed something important: It has opened the possibility of transferring control to nonneg from anywhere else in the program. I emphasized the part that I don't agree with. Modern languages like C++ do not allow goto to transfer control arbitrarily. Here are two examples: You cannot jump to a label that is defined in a different function. You cannot jump over a variable initialization. Now consider composing your code of tiny functions that adhere to the single responsibility principle: int clamp_to_zero(int n) { if (n >= 0) goto n_is_not_negative: n = 0; n_is_not_negative: return n; } The classic argument against the goto statement is that control could have transferred from anywhere inside your program to the label n_is_not_negative, but this simply is not (and was never) true in C++. If you try it, you will get a compiler error, because labels are scoped. The rest of the program doesn't even see the name n_is_not_negative, so it's just not possible to jump there. This is a static guarantee! Now, I'm not saying that this version is better then the one without the goto, but to make the latter as expressive as the first one, we would at least have to insert a comment, or even better yet, an assertion: int clamp_to_zero(int n) { if (n < 0) n = 0; // n is not negative at this point assert(n >= 0); return n; } Note that you basically get the assertion for free in the goto version, because the condition n >= 0 is already written in line 1, and n = 0; satisfies the condition trivially. But that's just a random observation. It seems to me that "don't use gotos!" is one of those dogmas like "don't use multiple returns!" that stem from a time where the real problem were functions of hundreds or even thousand of lines of code. So, do we still have a case against the goto statement, other than that it is not particularly useful? I haven't written a goto in at least a decade, but it's not like I was running away in terror whenever I encountered one. 1 Ideally, I would like to see a strong and valid argument against gotos that still holds when you adhere to established programming principles for clean code like the SRP. "You can jump anywhere" is not (and has never been) a valid argument in C++, and somehow I don't like teaching stuff that is not true. 1: Also, I have never been able to resurrect even a single velociraptor, no matter how many gotos I tried :(

    Read the article

1