Search Results

Search found 225 results on 9 pages for 'vt x'.

Page 1/9 | 1 2 3 4 5 6 7 8 9  | Next Page >

  • Intel site says VT-x is supported on my CPU, but tests say otherwise

    - by Anshul
    I have a laptop with an Intel 2nd Gen. i7-2729QM (http://ark.intel.com/products/50067/) and the Intel site says that it supports VT-x, but I've downloaded the Intel Processor Identification Utility (http://www.intel.com/support/processors/tools/piu/sb/CS-014921.htm) and the test says that my CPU does not have VT-x. There is no option in my BIOS that allows me to enable/disable VT-x. I researched my laptop model (SAGER NP8170) and most forums say that it's enabled by default and there's no option in the BIOS. So assuming that's true, what gives? I also downloaded another tool called SecurAble from GRC and it also says that my CPU doesn't support VT-x. VirtualBox also says that my CPU does not support virtualization. My mind is boggled by why it says on the Intel site that my CPU supports VT-x but all other tests show otherwise. Anyone know what's going on? Thanks in advance.

    Read the article

  • Windows 8 freezes on startup when intel VT-d is enabled

    - by John Nevermore
    I don't know what to make of this situation: Windows 8 freezes after about 3 seconds after booting to the log in screen. The only way i have been able to avoid the freeze, is if i set VT-d disabled VT-d enabled, but Nvidia drivers uninstalled (running on integrated graphics) VT-d enabled, Nvidia drivers installed, Hyper-V feature enabled My goal is to get Windows 8 running with VMWare (ie. Hyper-V has to stay disabled), VT-d and the latest NVidia drivers. Specs: 32 GB of ram Intel Core i7-2760QM NVidia Quadro 1000M Intel 520 SSD 480GB Maybe somebody has experience with this kind of a situation ?

    Read the article

  • VT-x not enabled on 2010 Mac Pro

    - by BlindingDawn
    To start I had a Hackintosh as per the instructions from Lifehacker.com before and moved everything to a new 2010 8 Core Mac Pro. I opted for a restore from the time machine backup rather than using the migration assistance. I believe this may have caused more problems but one in particular is the lack of VT-x support. When I checked Parallels Desktop under "Host Hardware" information, I get the following that shows that VT-x isn't enabled. <Cpu dyn_lists=""> <Number>16</Number> <Model>Intel(R) Xeon(R) CPU E5620 @ 2.40GHz</Model> <Mode>1</Mode> <Speed>2400</Speed> <VtxEnabled>0</VtxEnabled> <VtxMode>1</VtxMode> 1) Does Parallels Desktop support using VT-x? 2) Does this setting show that my VT-x isn't enabled? 3) Is there a way of fixing it so that it is enabled? 4) Is there a way of using my Time Machine backup as if I'm doing a restore using migration assistance and just restore the files and settings?

    Read the article

  • What desktop boards support VT-D or IOMMU?

    - by Jeff Shattock
    I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

    Read the article

  • Sort Grid Columns of mixed type in EXTJS Grid

    - by Amit
    Hello, I want to sort the extjs columns, I have the column type as float and from the server side i am getting values which can contain "-" value , now what happens the grid is displaying me the NaN value instead of - and the sort is not working anymore. My requirement is to create a custom sort which can sort first based on number and then sort based on string. Thanks to suggest as renderer also not works for me. My Json String is: {metaData:{"totalProperty":"total", "root":"records","fields":[{"header":"Part Number##false","name":"XJE010^VT-007!0","type":"string"},{"header":"Marketing Status##false","name":"STP716^VT-007!0","type":"string"},{"header":"Package##false","name":"XJE016^VT-007!0","type":"string"},{"header":"Automotive Grade##false","name":"STP472^VT-007!0","type":"string"},{"header":"VDSS##false","name":"XJG810^VT-007!0","type":"float"},{"header":"Drain Current (Dc)(I_D) % (A)##false","name":"XJG273^VT-006!0","type":"float"},{"header":"RDS(on) (@VGS=10V) % (&#937;)##false","name":"XJG640^VT-006!3","type":"float"},{"header":"Features##false","name":"GNP023^VT-007!0","type":"string"},{"header":"RDS(on) (@4.5 or 5V) % (&#937;)##false","name":"XJG640^VT-006!6","type":"float"},{"header":"RDS(on) (@2.7V) % (&#937;)##false","name":"XJG640^VT-006!7","type":"float"},{"header":"RDS(on) (@1.8V) % (&#937;)##false","name":"XJG640^VT-006!8","type":"float"},{"header":"Free Samples##false","name":"STP0881^VT-007!0","type":"string"},{"header":"Total Gate Charge(Qg) typ ()##true","name":"STP049^VT-002!0","type":"float"},{"header":"Total Power Dissipation(PD) % (W)##true","name":"XJG820^VT-006!0","type":"float"}]},"success":"true", "total":13,"records":[{"XJE010^VT-007!0":"STB80PF55$$/cn/analog/product/67164.jsp","STP716^VT-007!0":"Active","XJE016^VT-007!0":"D2PAK","STP472^VT-007!0":"_","XJG810^VT-007!0":"-55","XJG273^VT-006!0":"80","XJG640^VT-006!3":".018","GNP023^VT-007!0":"-","XJG640^VT-006!6":"-","XJG640^VT-006!7":"-","XJG640^VT-006!8":"-","STP0881^VT-007!0":"No","STP049^VT-002!0":"190","XJG820^VT-006!0":"300"},{"XJE010^VT-007!0":"STD10PF06$$/cn/analog/product/64543.jsp","STP716^VT-007!0":"Active","XJE016^VT-007!0":"IPAK TO-251 TO 252 DPAK","STP472^VT-007!0":"_","XJG810^VT-007!0":"-60","XJG273^VT-006!0":"-10","XJG640^VT-006!3":".2","GNP023^VT-007!0":"-","XJG640^VT-006!6":"-","XJG640^VT-006!7":"-","XJG640^VT-006!8":"-","STP0881^VT-007!0":"No ... Regards, Amit

    Read the article

  • Virtual PC and hardware-assisted virtualization (VT-x) problem

    - by Vesa Huovi
    I've installed Microsoft's Virtual PC on Windows 7, but when I try to start a virtual machine I get the following error message: '<Virtual machine name' could not be started because hardware-assisted virtualization is disabled. Please enable hardware virtualization in the BIOS settings and try again. If hardware virtualization settings is already enabled, you may have to disable Trusted Execution Technology (TXT) setting in BIOS or update the system BIOS. However, if I download and run the Hardware-Assisted Virtualization Detection Tool, it gives the following positive message: This computer is configured with hardware-assisted virtualization. This computer meets the processor requirements to run Windows Virtual PC. If this computer runs a supported edition of Windows® 7, you can install Windows Virtual PC. I've also used the MSR Walker in the third-party utility CrystalCPUID to examine MSR 0x3a on both processors on my system, and it's 0x5 (0x4 = VT enabled, 0x1 = VT lock), as expected. Does anyone have any ideas of what else to check? Thanks.

    Read the article

  • xorg DPMS off: keep VT from turning screen back on

    - by Metiu
    I have an embedded board with a small UPS. When AC power goes down, I need to turn off all power hungry devices in order to have a clean shutdown. First thing I do, is set DPMS to force powerdown, then go through the usual SIGTERM/SIGKILL/umount sequence. I have an Intel i915 Display adapter connected to an LVDS LCD panel. Unfortunately, when Xorg dies, Xserver or the VT code turn the LCD panel back on. I even tried working around it by directly poking the panel enable register in the Display chip, so that X doesn't know about it, but the panel goes back on when the VT comes back. Is there any "legal" way of keeping the display off? Thank you

    Read the article

  • IBM X3200 M2 upgrade and VT-x / usb passthrough for esxi

    - by enzo
    Hi, I have an IBM server x3200 m2 4368-k1g. Only to understand, simply because on IBM support does not exist no more upgrades kit on sale... if I buy a xeon processor, for example x3330 (4core @ 2.6ghz), and put it on my motherboard... 1) it works? 2) on the bios (where now there is no trace about...) will compare a VT-x menu to select and enable? 3) with esxi, once the VT-x is on... I'll be able to have usb passthrough ? Thank you in advance for your reply

    Read the article

  • VM: Windows 7 host, Linux guest, VT-d?

    - by chx
    I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

    Read the article

  • What is vt.handoff=7 parameter in grub.cfg

    - by sirkubax
    I wonder what vt.handoff=7 parameter does. I can not find any good man for that... BTW, if you have a nice descriptoon about : search --no-floppy --fs-uuid --set=root I would be happy :) grub.cfg example: menuentry 'FAILSAFE' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos8)' search --no-floppy --fs-uuid --set=root 36286167-4eba-4a1e-a202-155c6baafa01 linux /boot/vmlinuz-2.6.37-12-generic root=UUID=36286167-4eba-4a1e-a202-155c6baafa01 ro vt.handoff=7 quiet splash initrd /boot/initrd.img-2.6.37-12-generic } BTW2 - i can not create tag vt.handoff ;(

    Read the article

  • VMware Workstation reboot 32-bit host when starting 32/64-bit guest using VT-x

    - by Powerman
    I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas? Update 1: I've tried to boot vt.iso provided at http://communities.vmware.com/docs/DOC-8978 and here is it report: CPU 0: VT is enabled on this core CPU 1: VT is enabled on this core Update 2: I've just tried to boot 32-bit guests (Windows7, Ubuntu9.04 and Gentoo) using all possible virtualization modes. In Automatic, Automatic with Replay, Binary translation everything works, in Intel VT-x/EPT or AMD-V/RVI I got message "This host does not support EPT. Using software virtualization with a software MMU." and everything works. BUT in Intel VT-x or AMD-V mode all 32-bit guests reset host just like 64-bit guests! So, this issue is not specific to 64-bit guests. One more thing. Using Intel VT-x or AMD-V mode for both 32/64-bit guests my host reset right after starting VM, i.e. before VM BIOS POST and before guest even start booting. But using Intel VT-x/EPT or AMD-V/RVI VM BIOS runs ok, then 64-bit guests start booting (Windows7 completed "Loading files" progressbar), and only after that host reset.

    Read the article

  • Intel Xeon vt-d query

    - by deploymonkey
    Does Xeon westmere ep (xeon 56xx series) have vt-d (=iommy / direct io) or does intel TXT (Intel® Trusted Execution Technology) include vt-d? I'm at a loss. I've been researching current processors for an important project for some time now. I need to know, if the xeon 5600s (Westmere EP) include vt-d (iommu/directed io/pci passing) because the system will run virtualized guests. This enables direct hardware access eg. pci passthrough, in xen for example. It seems that the 5600s TXT should incorporate vt-d and that xeon 5600s should include vt-d as they are ramped up 5500s, but there is no conclusive answer anywhere. Intel's processor comparison only states that 5500s have vt-d and no TXT and 5600s have no vt-d but TXT. I'd be really grateful if anybody could clear this up and possibly even provide a citation. Thanks a lot.

    Read the article

  • Intel VT-x disappeared after upgrading to Windows 8

    - by StepTNT
    I've upgraded to Windows 8 some weeks ago (MSDNAA!) and today, while I was trying to run a VM, I've noticed that VT-x is disabled. Now, Hyper-V works without problems, as I've tried emulating Win7 and WP8; but VirtualBox says that VT-x is disabled and it can't run my VM. Just to double check, I've run Securable by GRC and the Intel utility and both says that I've got VT-x off. Here comes the problem: VT-x is ON in my BIOS, and it worked flawlessly before upgrading to Windows 8! Any kind of suggestion? EDIT: My CPU supports VT-x: http://ark.intel.com/products/52219

    Read the article

  • Can I autologin a specific user on a specific VT, but still have other login shells running?

    - by Michael
    I'm running a linux system with Ubuntu Karmic on it, and I use it to run a webcam and a program that continuously outputs on the console. Is there any way I can force a user to login on VT2, and then switch VTs to VT2, but still have other login consoles running so I can hook a keyboard up to it and CTRL-ALT-F# to get to another terminal? I have a feeling this needs to go in my rc.local file, but nothing in the login manpage seems to suggest it can do what I want it to do. If there is no way to login a user on the vt, launching the program directly on a specific VT will work as well, since the user's shell in /etc/passwd is set to the program anyway.

    Read the article

  • Virtualbox and getting the Locked VT-x Error when trying to use more than 1 processor on the session

    - by Dave
    I have installed the latest version of virtualbox onto my Hewlett Pakard (h8-1170uk) I have a intel i7 2600 cpu and 8 gb of ram I can get virtual box to create several sessions of different operating systems at the same time, but whenever i try to get 1 session to open up using more than 1 processor option select ( i wanted one of my session access to 2 processors ) i keep getting this error message VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have search many times and cannot find a option to correct this. I have check my BIOS and there are no options about VT-x or Virtualisation or anything. Am i doing something wrong ? Why does Virtualbox run fine when just using the 1 processor option ?

    Read the article

  • xf86OpenConsole: Cannot find a free VT: Invalid argument

    - by Oliver Seeliger
    I'v set up an Ubuntu 12.04 from the precreated OpenVZ template. The host system is configured as follows: # $ cat /etc/issue Debian GNU/Linux 6.0 # $ uname -a Linux openvz-02 2.6.32-16-pve #1 SMP Fri Nov 9 11:42:51 CET 2012 x86_64 GNU/Linux # $ apt-cache showpkg proxmox-ve-2.6.32 Package: proxmox-ve-2.6.32 # $ tail -n 3 /etc/apt/sources.list # PVE packages provided by proxmox.com deb http://download.proxmox.com/debian squeeze pve For a software project I need a minimal xserver and followed the instructions at https://help.ubuntu.com/community/ServerGUI. I simply installed the package xorg (xorg 1:7.6+7ubuntu7.1). Now when I 'startx' I get an error message Fatal server error: xf86OpenConsole: Cannot find a free VT: Invalid argument The complete output of startx # startx X.Org X Server 1.11.3 Release Date: 2011-12-16 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu Current Operating System: Linux www 2.6.32-16-pve #1 SMP Fri Nov 9 11:42:51 CET 2012 x86_64 Kernel command line: quiet Build Date: 29 August 2012 12:12:33AM xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 20 08:46:04 2012 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot find a free VT: Invalid argument Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

    Read the article

  • How to makesure VM is in Para virtualization mode on XEN?

    - by ananthan
    I am having a server running XEN,with ubuntu 12.04 as Domain 0. Intel VT is turned on by default and i dont want to run any Windows OS as VM. So 1. how can i makesure that all the created VM will be in paravirtualized mode even with VT enabled? I have heard that in Full Virtualization hypervisor needs to work hard for emulating all the underlying hardware,which may reduce performance for too much i/o specific applications when compared to para mode. 2.Since i am running only Linux VMs do i really need to enable VT support? 3.Can i be able to run Linux VM in para mode with VT enabled? 4.Will simply turning on VT support changes virtualization from para to full virtualization?? 5.Will there be any performance improvement for VM running Linux OS if VT is enabled?

    Read the article

  • Enable VT-x in HP 8300 elite

    - by lang2
    I have a HP 8300 elite (Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz). I'm trying to run a virtual machine via VirtualBox. But every time I start the VM, it says: VT-x is disabled in the BIOS. (VERR_VMX_MSR_VMXON_DISABLED). My lscpu output is like this: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 58 Stepping: 9 CPU MHz: 1600.000 BogoMIPS: 6784.74 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 8192K NUMA node0 CPU(s): 0-7 I went into the BIOS but the things the can be tweaked is very limited and I couldn't find the VT-x setting. Anybody know how to do this in this setup?

    Read the article

  • Problem switching to a VT from X

    - by Dane Midas
    Hello, I have trouble switching to a VT from X I only have VT 6 defined in inittab, however once in X, ctrl + alt + F6 does not work. I see no errors of any sort, and my keymapping is correct. How would I determine the source of, and solve this problem?

    Read the article

  • What desktop boards support VT-D or IOMMU?

    - by Jeff Shattock
    I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

    Read the article

  • Virtualizing Windows with VT-d to play within it

    - by Bahaïka
    I would like to know if what I want to is possible. First, here is my hardware configuration : MB : Gigabyte H77-DS3H Intel Core i5 3330 (3.00GHz) MSI Nvidia GTX 760 8 Gb RAM 1333 MHz What I want to do is to have a linux (probably ArchLinux) as a main and unique OS on my computer (I don't want a dualboot). And virtualizing Windows under Linux. I've read about VT-d (supported by my CPU) and PCIBackHide. I'd like to know if I can initialize Linux with the Integrated Graphics and Virtualize Windows to use the GTX 760. If I can do it, where do I have to plug my two screens ? On the MainBoard or the GTX 760 ? How do I achive that idea ?

    Read the article

  • Installing Windows server 2008 on not VT system

    - by Shahid
    I have a Dell Inspiron 1440 laptop and it has no virtualization support, i want to install Windows Server 2008 on it using Virtual Box, i know that we can install Mac OS on not Virtualization supported system using some patch. I also haired that Virtual box don't needs hardware virtualization, it will do that using software virtualization. how can i achieve that, any guidance would be very nice. Thanks

    Read the article

  • Unable to boot Ubuntu 64-bit in Virtualbox on Mac OS X

    - by Aamir
    I have latest generation Macbook Pro 7.1 (Intel Core 2 Duo) running Mac OS X 10.6.6. I installed Virtuabox 4.0.2 and tried to boot Ubuntu 10.10 64-bit iso. The boot options screen from the live CD came up: However when I continued to load the live session, or installer for that matter, I encountered the following error: This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropriate for your CPU. I am not sure if VT-x is enabled or is supported in the Core 2 Duo of my Macbook Pro. But at least, I have both I/O APIC and VT-x enabled for hardware virtualization as told in the Virtualbox manual.

    Read the article

  • How to configure DD-WRT routing table when creating an isolated network segment for PCI C VT compliance

    - by tetranz
    I'm the volunteer support and system admin person at a small private school. We need to setup a PCI compliant Windows PC as a virtual terminal for credit card processing. I've read questionnaire SAQ C-VT and, to quote, this computer needs to be accessed: "via a computer that is isolated in a single location, and is not connected to other locations or systems within your environment (this can be achieved via a firewall or network segmentation to isolate the computer from other systems)" Our setup is as follows: DSL modem from ISP is setup to be a "transparent pipe" with no extra services. That goes into the WAN port of Linksys WRT54-GL running a DD-WRT. The LAN is 192.168.1.x. There are a couple of other WRT54-GL / DD-WRT devices. One is used as a wireless AP and another is a client bridge. To isolate the VT (virtual terminal) machine, I have another DD-WRT device. Its WAN is connected to a port on the 192.168.1.x LAN. The virtual terminal machine is connected to its LAN which is at 192.168.10.x. The SPI Firewall etc is turned on. It's basically the default DD-WRT gateway setup where the "ISP" is our own LAN. That's working. All incoming traffic to the VT machine is blocked, including from our own LAN. The VT can access the internet BUT, and here's the problem, it can also ping any of the computers on the 192.168.1.x LAN. I think I need to stop that. I'm guessing that I could do something with the Static Routing table in the VT machine's DD-WRT device. I need to route anything going to 192.168.1.x other than the gateway which is 192.168.1.1 to 0.0.0.0 or something like that. That's where I'm stuck at the end of my knowledge. Or ... do I need to get yet another DD-WRT so the network is "balanced". Maybe I need to have the internet from the DSL going into a DD-WRT which has only two devices on its LAN i.e., two other DD-WRTs, one for the main LAN and one for the VT. I think that would do but I'd like to avoid the extra cost and complexity if I don't need it. Thanks

    Read the article

1 2 3 4 5 6 7 8 9  | Next Page >