Search Results

Search found 21 results on 1 pages for 'waleed eissa'.

Page 1/1 | 1 

  • redirect non-www to www while preserving protocol

    - by Waleed Hamra
    I am aware of the fact that there are tons of questions in this section and in server fault dealing with redirections from non-www to www URLs. But I couldn't find one dealing with this issue while preserving protocol. I am no mod-rewrite expert, and my code is just copy/pasted... here's what i have: RewriteCond %{HTTP_HOST} ^domain.tld$ [NC] RewriteRule ^(.*)$ http://www.domain.tld$1 [R=301,L] So now http://domain.tld and https://domain.tld are forwarded to http://domain.tld How do i make it so that https stays on https while http stays on http?

    Read the article

  • Apache2 conditional section based on port

    - by Waleed Hamra
    I don't know much about if statements in apache configuration, and I'm wondering if I can have a section of the configuration applied only if the request is received on a certain port. In short, this is about SSL. I have name based virtual hosts, I can make a configuration for port 80, then duplicate it all for port 443, and add the relevant SSL configurations. But this seems redundant. I was wondering if i can have something like: <VirtualHost *:80 *:443> and then I can put: <IfModule mod_ssl.c> SSLEngine on SSLCertificateFile ... SSLCertificateKeyFile ... SSLCACertificateFile ... </IfModule> inside an if statement that checks if connection is on port 443... or is such thing impossible? the server supports SNI, and I don't have any worries from non-SNI compliant browsers.

    Read the article

  • possible UDP attack on BIND?

    - by Waleed Hamra
    hello everyone, i was surprised last month when my EC2 instance (ubuntu precise server), that is supposed to be under the free tier still, accumulated lots of traffic... today, while checking my current billing statement, i noticed i already have tons of traffic, while still in the middle of the month, and i'm fearing what my bill by the end of the month is going to be... i installed bandwidthd, and after few minutes, i noticed lots of UDP traffic to "108.162.233.15". this is apparently a cloudflare IP, and i don't have anything using cloudflare (as far as i know). so i ran "iftop" to see what ports are being used, and i saw the UDP traffic coming from port 80 to my port 53... why would a webserver query dns? so i stopped bind on my server, and ran it in foreground debugging mode, and saw the following query, being repeated continuously: 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: UDP request 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: request is not signed 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: recursion available 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: query 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: query (cache) 'isc.org/ANY/IN' approved 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: send 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: sendto 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: senddone 17-Nov-2012 12:30:58.217 client 108.162.233.15#80: next 17-Nov-2012 12:30:58.217 client 108.162.233.15#80: endrequest 17-Nov-2012 12:30:58.217 client @0x7fbee05126e0: udprecv 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: UDP request 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: request is not signed 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: recursion available 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: query 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: query (cache) 'isc.org/ANY/IN' approved 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: send 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: sendto 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: senddone 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: next 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: endrequest my question is... is this normal? should i be worried? or is this completely irrelevant to my data charges, and i should wait to see more data from bandwidthd? thank you in advance.

    Read the article

  • How to add exception for backup MX to tumgreyspf?

    - by Waleed Hamra
    I have an Ubuntu raring server running postfix/dovecot as an email server, with tumgreyspf doing greylisting and SPF checks. My problem is that I also have a backup MX server, that is supposed to store my emails temporarily, should my main server ever fails. It usually rejects receiving emails if it finds the main server online and functional. The problem is when it does need to do its job, tumgreyspf rejects all emails from the backup MX with an error like this: Jun 27 16:18:13 hamra postfix/smtpd[28732]: NOQUEUE: reject: RCPT from mxbackup.mydomain.com[x.x.x.x]: 550 5.7.1 <[email protected]>: Recipient address rejected: QUEUE_ID="" SPF Reports: 'SPF fail - not authorized'; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<mxbackup.mydomain.com> any ideas?

    Read the article

  • cygwin rsync over ssh very slow

    - by Waleed Hamra
    I have 2 machines running Windows Xp SP3. I have cygwin installed on both, version 1.7. I have rsync and ssh installed on both, and configured using default settings as per ssh-host-config and ssh-user-config programs provided. I moved the public keys into their respective locations, and basically ssh is working fine. i began an rsync operation, using: rsync -av --delete --hard-links local_dir username@other_machine:/some_dir well... on both machines, the processor is running near idle, no heavy usage. I checked IO using process explorer on both machines, and that too is at normal levels (1~2 MB/s), so I can't see where the bottlenecks are, because network performance is aweful. I'm not going over 1MB/s... when a normal file copy using windows sharing achieves some ~10 MB/s.. What could be wrong?

    Read the article

  • Synchronize folder on network, preserving hard links

    - by Waleed Hamra
    I have few computers using Windows XP Pro. I want to synchronize/back a folder from one machine, to another one. This far, It's a simple problem, and I've used FreeFileSync for such operations, with very satisfactory results. But, this all changes when hard links come into play. Today's folder contains lots of hard links, using such backup programs will result in hard links being treated as multiple files, and copied as such, greatly increasing folder size on destination, and defeating the purpose of using all these hard links in the first place. It gets more complicated when we take into consideration the fact that network shares on Windows DON'T expose hard linking facilities, meaning that running a hard-link-aware tool like rsync using --hard-links will be of no use. So my question, how can i backup my folder to the other computer, while preserving hard links? I don't mind installing 3rd party tools to do it, as obviously, the standard windows shares approach won't work... I am guessing there might be some tool that can be installed on both machines and works in a server/client mode? anyone has any idea how to do this?

    Read the article

  • How to prevent DOS attacks using image resizing in an ASP.NET application?

    - by Waleed Eissa
    I'm currently developing a site where users can upload images to use as avatars, I know this makes me sound a little paranoid but I was wondering what if a malicious user uploads an image with incredibly large dimensions that will eat the server memory (as a DOS attack), I already have a limit on the file size that can be uploaded (250 k) but even that size can allow for an image with incredibly large dimensions if the image for example is a JPEG that contains one color and created with a very low quality setting. Taking into consideration that the image is uploaded as a bitmap in memory when being resized (ie. not compressed), I wonder if such DOS attacks occur, even to check the image dimensions it has to be uploaded in memory first, did you hear about any attacks that exploited this? Am I too worried?

    Read the article

  • How Search Engine Bots Crawl Forums?

    - by Waleed Eissa
    If I have a forums site with a large number of threads, will the search engine bot crawl the whole site every time? Say I have over 1,000,000 threads in my site, will they get crawled every time the bot crawls my site? or how does it work? I want my website to be indexed but I don't want the bot to kill my website! In other words I don't want the bot to keep crawling the old threads again and again every time it crawls my website. Also, what about the pages crawled before? Will the bot request them every time it crawls my website to make sure they are still on the site? I'm asking this because I only link to the latest threads, i.e. there's a page that contains a list of all the latest threads, but I don't link to the older threads, they have to be explicitly requested by URL, e.g. http://www.mysite.com/showthread.aspx?threadid=7 , will this work to stop the bot from bringing my site down and consuming all my bandwidth? P.S. The site is still under development but I want to know in order to design the site so that search engine bots don't bring it down. Thanks

    Read the article

  • Are there white lists for Yahoo, Gmail, Hotmail and AOL?

    - by Waleed Eissa
    In my website (under development), the members can send messages to each other which are sent directly to their email, now I'm worried that some members can send spam to other members (I have a spam filter but it doesn't give 100% protection as you know), I'm worried that my domain might get blacklisted on Yahoo, Gmail, Hotmail or AOL which will cause any messages sent from my domain to end up in the spam folder, this is why I want to add the domain of my website to their whitelists (if they exist). P.S. I don't want to use private messages that members check on the site and I have my reason for this. Thanks

    Read the article

  • Good SMTP server on Windows for a production server

    - by Waleed Eissa
    I'm going to have my website hosted soon on a VPS or dedicated server (with Windows 2008), so I'm trying to plan ahead. I wonder whether the built-in SMTP server that comes with IIS7 is reliable enough for a production server or should I look for an alternative? I heard good things about hmailserver and best of all it's free, do you have any experience with using the bulit-in SMTP on a high traffic website. Thanks a lot for any suggestions

    Read the article

  • Problem with IE when using display:block for links

    - by Waleed Eissa
    This is my HTML: <div id="links"> <a href="">Link 1</a> <a href="">Link 2</a> <a href="">Link 3</a> <a href="">Link 4</a> </div> And these are the CSS styles: #links { position: absolute; border: 1px solid #000; } #links a { display: block; } #links a:hover { background-color: #CCC; } This displays a list of links, the problem is that in IE, I can only click a link by directly clicking the text link, which is not the case with other browsers (where you can click anywhere whether the text link or anywhere else as long as it's in the link block), is there any fix for that (with only CSS, no javascript)? Please note that I don't want to specify a width for the links or the div.

    Read the article

  • jQuery: Multiple animations with a delay on a set of divs

    - by Waleed
    Hey there, I have a group of 4 divs and I'm looking to use jQuery to animate them once, then have a delay using delay(), and then run another set of animations on them, putting the divs back to their original configuration. Here's the code that I have: //only selectors called 'option1' are affected by delay, and not 'option1 img' or 'option2' $("#option1").showOption1().delay(3000).hideOption1(); //if i don't attach to #option1, delay doesn't work, but the animations that need to happen simultaneously work $(document).showOption1().delay(3000).hideOption1(); jQuery.fn.showOption1 = function(){ $("#option2, #option3, #leftColumn").fadeOut(1000); $("#option1").css("zIndex", "5"); $("#option1").animate({ left: "370px", }, 1500); $("#option1 img").animate({ width: "500px", }, 1500, function(){ $("p.optionText").text('hello'); }); return this; } jQuery.fn.hideOption1 = function(){ $("#option1 img").animate({ width: "175px", }, 1500); $("#option1").animate({ left: "743px", }, 1500); $("#option2, #option3, #leftColumn").fadeIn(2000); $("#option1").css("zIndex", "1"); return this; } I've tried two ways of running these two functions, as seen on lines 2 and 5. In the case of line 2, showOption1() will run fine, but then only $("#option1").animate({ left: "743px", }, 1500); will work from hideOption1() after the delay. The rest of hideOption1() is fired immediately after showOption1() finishes, ignoring the delay. On the other hand, if I run line 5, all the code in hideOption1() runs simultaneously as desired, but ignores the delay entirely, running immediately after showOption1() finishes. How can I have all the code in hideOption1() run simultaneously after the delay? Thanks much in advance!

    Read the article

  • How to refresh to entire device's screen (Windows Mobile)?

    - by walidad
    Hi everybody, I'm working on a simple application that draws an alpha-blended picture on the screen's Device Context every 2 secs, I want to refresh the screen contents before the drawing operation (To erase the drawn pic), I have used many many trick but unfortunately, the screen won't refresh correctly, some regions still keep portions of the drawn pic I'm really frustrated from this issue :( These are the sources codes I have used, I'm using C# SendMessage(HWND_BROADCAST, WM_SYSCOLORCHANGE, IntPtr.Zero, IntPtr.Zero); // wasted time in the refreshing process is enough to keep this. UpdateWindow(HWND_BROADCAST);// does not work at all! InvalidateRect(IntPtr.Zero,IntPtr.Zero,true); // the same goes here. SendMessage(HWND_BROADCAST, WM_PAINT, IntPtr.Zero, IntPtr.Zero); // pfffff ! SendMessage(HWND_BROADCAST, WM_SETTINGCHANGE, new IntPtr(SPI_SETNONCLIENTMETRICS), IntPtr.Zero); // trying to refresh the explorer, no resutl I used also EnumWindows and call back , very slow and does not fit my case. I wanna refresh the whole screen Help please! Regards Waleed

    Read the article

  • Which C# 4.0 Book would you purchase, and why?

    - by Jeremy
    I'm currently looking at purchasing a few C# 4.0 books, namely: Essential C# 4.0 by Mark Michaelis or C# 4.0 Unleashed by Bart De Smet. I am aware that both books are yet to be released, but would you consider purchasing either of these books, or would you recommend another? Thanks for your time. Clarification: I'm not a .net Ninja, but I do have 8+ years experience with the framework & related languages. So I'm generally looking for in-depth books. I also train/instruct the rest of my organisation generally 6 - 12 months after each .net release. Each of the developers I train has the same or more .net experience then myself. Once again thank you all for your time. Update: Thank you everyone for your responses. I've decided to purchase both books along with Visual C# 2010 Recipes: A Problem-Solution Approach, as suggested by Waleed Al Balooshi.

    Read the article

  • Spring maven error

    - by benaissa
    Hello, I'm using spring MVC with maven to develop a web application, but when i update dependencies maven i get this message: 5/6/10 10:09:50 AM CEST: Build errors for amundsen.web; org.apache.maven.lifecycle.LifecycleExecutionException: Failed to execute goal org.apache.maven.plugins:maven-resources-plugin:2.4.1:resources (default-resources) on project amundsen.web: Execution default-resources of goal org.apache.maven.plugins:maven-resources-plugin:2.4.1:resources failed: Plugin org.apache.maven.plugins:maven-resources-plugin:2.4.1 or one of its dependencies could not be resolved: Unable to get dependency information for org.apache.maven.plugins:maven-resources-plugin:maven-plugin:2.4.1: Failed to process POM for org.apache.maven.plugins:maven-resources-plugin:maven-plugin:2.4.1: Non-resolvable parent POM org.apache:apache:6 for org.apache.maven:maven-parent:13: Failed to resolve POM for org.apache:apache:6 due to The repository system is offline and the requested artifact is not locally available at /home/waleed/.m2/repository/org/apache/apache/6/apache-6.pom org.apache:apache:pom:6 from the specified remote repositories: plexus.snapshots (http://oss.repository.sonatype.org/content/repositories/plexus-snapshots, releases=false, snapshots=true), central (http://repo1.maven.org/maven2, releases=true, snapshots=false) my Maven dependencies are: <!-- Junit --> <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>${junit.version}</version> <scope>test</scope> </dependency> <dependency> <groupId>cglib</groupId> <artifactId>cglib</artifactId> <version>2.2</version> </dependency> <dependency> <groupId>commons-lang</groupId> <artifactId>commons-lang</artifactId> <version>2.3</version> </dependency> <dependency> <groupId>javax.servlet</groupId> <artifactId>com.springsource.javax.servlet.jsp.jstl</artifactId> <version>${servlet.jstl.version}</version> </dependency> <dependency> <groupId>javax.servlet</groupId> <artifactId>servlet-api</artifactId> <version>${servlet-api.version}</version> </dependency> <!--<dependency> <groupId>jstl</groupId> <artifactId>jstl</artifactId> <version>${jstl.version}</version> </dependency> --><!--<dependency> <groupId>javax.servlet</groupId> <artifactId>jstl</artifactId> <version>1.2</version> </dependency> --><dependency> <groupId>org.apache.taglibs</groupId> <artifactId>com.springsource.org.apache.taglibs.standard</artifactId> <version>${standard-taglib.version}</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-aspects</artifactId> <version>${spring.version}</version> </dependency> <!-- <dependency> <groupId>org.springframework</groupId> <artifactId>spring-beans</artifactId> <version>${spring.version}</version> </dependency> --> <dependency> <groupId>org.apache.commons</groupId> <artifactId>com.springsource.org.apache.commons.collections</artifactId> </dependency> <!-- Compile dependencies --> <dependency> <groupId>org.apache.log4j</groupId> <artifactId>com.springsource.org.apache.log4j</artifactId> </dependency> <!-- Spring (3.0) --> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.core</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.aop</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.expression</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.context</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.context.support</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.beans</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.orm</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>org.springframework.transaction</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-web</artifactId> </dependency> <!-- Spring security --> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-core</artifactId> <exclusions> <exclusion> <artifactId>spring-aop</artifactId> <groupId>org.springframework</groupId> </exclusion> </exclusions> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-core-tiger</artifactId> <version>${spring-security-core-tiger.version}</version> <exclusions> <!-- Exclude 2.0.x spring dependencies --> <exclusion> <groupId>org.springframework</groupId> <artifactId>spring-support</artifactId> </exclusion> </exclusions> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-config</artifactId> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-acl</artifactId> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-web</artifactId> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-taglibs</artifactId> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-context</artifactId> <version>${spring.version}</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-jdbc</artifactId> <version>${spring.version}</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-webmvc</artifactId> <version>${spring.version}</version> </dependency> <dependency> <groupId>commons-dbcp</groupId> <artifactId>commons-dbcp</artifactId> <version>${commons-dbc.version}</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-test</artifactId> <version>${spring.version}</version> </dependency> <dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-core</artifactId> <version>3.3.1.GA</version> </dependency> <!-- <dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-core</artifactId> <version>3.3.2.GA</version> hibernate-dependencies is a pom, not needed for hibernate-core </dependency> --> <dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-annotations</artifactId> <version>3.4.0.GA</version> </dependency> <dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-validator</artifactId> <version>3.1.0.GA</version> </dependency> <dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-commons-annotations</artifactId> <version>3.3.0.ga</version> <exclusions> <exclusion> <groupId>org.hibernate</groupId> <artifactId>hibernate</artifactId> </exclusion> </exclusions> </dependency> <dependency> <groupId>hibernate</groupId> <artifactId>hibernate-entitymanager</artifactId> <version>3.4.0.GA</version> </dependency> <dependency> <groupId>hibernate</groupId> <artifactId>hibernate-tools</artifactId> <version>3.2.3.GA</version> </dependency> <dependency> <groupId>org.hibernate</groupId> <artifactId>ejb3-persistence</artifactId> <version>1.0.2.GA</version> </dependency> <dependency> <groupId>commons-collections</groupId> <artifactId>commons-collections</artifactId> <version>3.2.1</version> </dependency> <dependency> <groupId>javax.transaction</groupId> <artifactId>jta</artifactId> <version>${jta.version}</version> </dependency> <dependency> <groupId>antlr</groupId> <artifactId>antlr</artifactId> <version>${antlr.version}</version> </dependency> <dependency> <groupId>mysql</groupId> <artifactId>mysql-connector-java</artifactId> <version>${mysql-connector-java.version}</version> </dependency> <!-- <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-api</artifactId> <version>1.5.6</version> </dependency> --><!-- concrete Log4J Implementation for SLF4J API--> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-log4j12</artifactId> <version>1.5.6</version> </dependency> <dependency> <groupId>javax.mail</groupId> <artifactId>mail</artifactId> <version>1.4</version> </dependency> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-api</artifactId> <version>1.5.11</version> </dependency> </dependencies>

    Read the article

1