Search Results

Search found 670 results on 27 pages for 'wan'.

Page 1/27 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Forward the Wan IP to another Wan IP without change the Source address

    - by user195410
    I have tried this case by using the NAT function in iptables but fail example. PC A IP is 1.1.1.1 (Win7) My Server IP is 2.2.2.2 (CentOS 6.2) target Server B is 3.3.3.3 (Windows server 2003) Flow: PC A WanIP -- My Server A -- Server B (WanIP) ----My iptables rules--------- iptables -t nat -A PREROUTING -d 2.2.2.2 -p tcp --dport 80 -j DNAT --to-destination 3.3.3.3:80 iptables -t nat -A POSTROUTING -d 2.2.2.2 -j MASQUERADE finally, i can access server B website by enter 2.2.2.2:80 but when i checked the access log at Server B i found it's source address had been changed to src:2.2.2.2 dst:3.3.3.3 please help me to do how to get the real address is src:1.1.1.1 dst:3.3.3.3

    Read the article

  • Forward the Wan IP to another Wan IP without changing the source address

    - by user195410
    I have tried this case by using the NAT function in iptables but fail example. PC A IP is 1.1.1.1 (Win7) My Server IP is 2.2.2.2 (CentOS 6.2) target Server B is 3.3.3.3 (Windows server 2003) Flow: PC A WanIP -- My Server A -- Server B (WanIP) My iptables rules: 1. iptables -t nat -A PREROUTING -d 2.2.2.2 -p tcp --dport 80 -j DNAT --to-destination 3.3.3.3:80 2. iptables -t nat -A POSTROUTING -d 2.2.2.2 -j MASQUERADE finally, i can access server B website by enter 2.2.2.2:80 but when i checked the access log at Server B i found it's source address had been changed to src:2.2.2.2 dst:3.3.3.3 please help me to do how to get the real address is src:1.1.1.1 dst:3.3.3.3

    Read the article

  • Switch smarthosts in Exchange when using dual WAN

    - by mat0ng
    Hi everybody, I'd like to know if it's possible to setup Exchange 2003/2007 to switch between smarthosts, based on the WAN connection currently in use. Example scenario: I have two WAN connections with different ISP's. Exchange is running behind a dual WAN router. The router is setup to fall back to secondary WAN when primary WAN fails. The smarthost set in Exchange is the SMTP server of the primary ISP. Because the smarthost set in Exchange only allows relaying from IP's of the primary WAN sending mail won't work when the router falls back to the secondary WAN. Sending mail directly through DNS MX lookup is an option but the ISP's have dynamic IP's that get blacklisted a lot. Thanks in advance!

    Read the article

  • Multiple WAN interfaces on SonicWall TZ 100?

    - by Chad Decker
    I'm using a SonicWall TZ 100 with a basic configuration of X0 for the LAN and X1 for the WAN. The WAN uses DHCP to obtain its routable IP address. I want to obtain a second routable IP from my ISP. I'm in luck because my cable company will provide me with an additional dynamic IP for $5/mo. How do I bind this IP to my SonicWall? My additional dynamic IP will not be consecutive to the original one. It won't even be on the same class C. I think what I want to do is to use one of the empty ports/interfaces (X2, X3, or X4), tell that interface to use DHCP, and then add that interface to the WAN "zone". I can't figure out how to do this though. Here's what I've tried so far: (1) I've looked in Network Interfaces. I see X0 and X1 but the other unused interfaces don't show up. I don't see an "Add" button to add the new interfaces. (2) I've looked in Network Zones. I see that X0, X2, X3, X4 are in the LAN zone. I tried to drag X3 into the WAN zone but I can't. Nor does clicking the "Configure" button allow me to move an unused interface from LAN to WAN. (3) I've read the post entitled Splitting up multiple WAN's on Sonicwall. This doesn't seem applicable to me. Any thoughts?

    Read the article

  • Zyxel p-2602HW-1DA - LAN to WAN routing problems

    - by Garrett
    Hi Got a new router yesterday (due to new internet supplier) and now all my requests for my own server (local lan) is routed directly to the router instead of the server, when using dns. Ex. I have a website www.mysite.org running on my server at home (local lan). From work I can access it via www.mysite.org, which is great. But from home (local lan) my request's for www.mysite.org gets rerouted to the routers web admin interface My last router didn't do this. My new router is a Zyxel P-2602HW-1DA, my old one was a LinkSys WRT-54GC V. 2.0. There's a rather wierd WAN-LAN, WAN-WAN setup interface which I cant really comprehend yet and the docs are rather vague. Have anyone had the same problem and can anyone guide me to a solution, would nice not write the ip address everytime i need to access the server on local lan. :). Kind regards Garrett

    Read the article

  • Linksys EA3500 : use WAN port as WAN + LAN possible?

    - by Dough
    I'm waiting for deliver of a Linksys EA3500 router. I was wondering if it was possible to get the WAN port act as normal WAN port (Internet IP) + LAN switch ? My problem is that my Internet box is in a room with NAS and PC, and the router will be in another room with TV, PS3 and PC. The Internet box have a 4 port Gigabit switch so one cable will plug from there to the router's WAN in the other room. The router will get the Internet IP from the Internet box, but will it be possible to have private network through this link too ? I could have a first network between the Internet box and the router, and another network form router and devices but that will do double NAT for nothing... Thanks for reading me and your help !

    Read the article

  • Multiple static WAN IP addresses to single LAN subnet

    - by Jessy Houle
    Below is my home network topology. I currently have 5 static IP addresses, 3 of which are in use by 3 routers. These routers in-turn subnet internal networks and port forward. I use my SSL VPN appliance to remote home from work or on the road. At this point I can remotely administer my Windows Server. I know the network is setup wrong, I was matching existing hardware the best I knew how. http://storage.jessyhoule.com.s3.amazonaws.com/network_topology.jpg Ok this said, here is the problem... One of my websites on my Windows Server now needs to be secure (SSL using port 443). However, I'm already port forwarding port 443 to my VPN appliance. Furthermore, if I'm going to have to reconfigure the network, I would really like to be able to use the SSL VPN to remotely administer all machines. I mentioned this to a friend of mine, who said that what I was looking for was a firewall. Explaining that a firewall would take in multiple static (WAN) IP addresses, and still allow all internal devices to be on the same network. So, basically, I could supply my SSL VPN appliance it's very own static (WAN) IP address routing, and yet have it on the same internal network (192.168.1.x) as all my other devices. The first question is... Does this sound right? Secondly, would you suggest anything different? And, finally, what is the cheapest way to do this? I am started down the road of downloading/installing untangle and smoothwall to see if they will do the job, hoping they take multiple static (WAN) IP addresses. Thank you in advance for your answers. -Jessy Houle

    Read the article

  • Small TCP Window on WAN between 2 Locations

    - by Brent
    Site A: Denver datacenter. 60MBPS. Site B: Chicago. 100MBPS. ICMP pings: Packets: Sent = 176, Received = 176, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 74ms, Maximum = 94ms, Average = 75ms File transfer between sites that never goes past ~7MBPS: Windows Update download at 60MBPS+: Site to site: IPSec VPN using two Cisco 5520's. CPU at 3-4% and lots of memory to spare. The latency between to two sites is very acceptable so I can't see an issue why it is performing so slow when transferring between the two sites. I have found that any type of transfer (FTP, HTTP, Windows file shares) will never go above ~7MBPS. When the WAN was first setup, I was able to get transfers at 50-60MBPS, which is what is expected due to the WAN connection at the Site A at 60MBPS. Then a few days later, I was not able to get anything going faster than ~7MBPS. Is there a upstream router between Denver and Chicago causing this? I want to take the blame away from our setup as downloads from Windows Update go blazing fast and for the first few days after the site to site VPN came up, I was transferring VM images at 50-60MBPS. Our stack: HP P2000 MSA - HP C7000 Chassis - HP Flex-10 - Cisco Gigabit switch - Cisco ASA - WAN

    Read the article

  • Dual-WAN router

    - by aix
    I am looking for a router that would fit the following requirements: Two WAN interfaces: the primary is PPPoE, the secondary will link to a GigE port on another router (a 100Mbps link will suffice); Two (ideally four) GigE LAN ports; No requirement for a firewall; No requirement for Wi-Fi; Inexpensive. The plan for the two WAN interfaces is as follows. All outbound traffic will go to the primary, with exceptions based on destination IP/subnet or possibly on src+dest IPs/subnets. Such exceptions should be routed to the secondary. It would be very nice if, should the primary go down, the secondary would automatically take over for all outbound traffic. I am reasonably sure that I can put something together based on dd-wrt. However, I'd like to hear from you what alternatives are out there (especially something easier to set up for my use case, even if it means paying more for the hardware.)

    Read the article

  • Feasibility of Windows Server 2008 DFS replication over WAN link

    - by CesarGon
    We have just set up a WAN link that connects two buildings in our organisation. The link is provided by a 100-Mbps point to point line. We have a Windows Server 2008 R2 domain controller on each side of the link. Now we are planning to set up DFS for file services across the organisation. The estimated data volume is over 2 TB, and will grow at approximately 20% annually. My idea is to set up a file server in each building and install DFS so that all the contents stay replicated over the 100-Mbps link. I hope that this will ensure that any user will be directed to the closest (and fastest) server when requesting a file from the DFS folders. My concern is whether a 100-Mbps WAN link is good enough to guarantee DFS replication. I've no experience with DFS, so any solid advice is welcome. The line is reliable (i.e. it doesn't crash often) and our data transfer tests show that a 5 MB/sec transfer rate is easily achieved. This is approximately 40% of the nominal bandwidth. I am also concerned about the latency. I mean, how long will users need to wait to see one change on one side of the link after the change has been made on the other side. My questions are: Is this link between networks a reliable infrastructure on which to set up DFS replication? What latency times would be typical (seconds, minutes, hours, days)? Would you recommend that we go for DFS in this scenario, or is there a better alternative? Many thanks.

    Read the article

  • Cisco 1841: Multi-wan capable?

    - by gravyface
    Have an 1841 router with the following interfaces: 0/0 0/1 AUX on the right side, believe it's slot 1, there's an add-on interface FE0 (shows up as 000). Does this allow a multi-WAN configuration? i.e. can I use 0/1 for WAN1 and FE0 as WAN2 out-of-the-box or does this require additional licensing and/or another add-on interface in slot 0?

    Read the article

  • How do I make a virtualised WAN?

    - by EnchantedEggs
    I want to create a virtualised WAN. As in, I want to have a couple of VMs (VBox) on one physical host machine, that exist on separate LANs, but that can talk to each other. Do I make the VMs, set them up with different IP addresses (e.g. 1.2.3.4 and 5.6.7.8) and then configure port forwarding between them somehow??? I've seen articles that set up port forwarding on port 2222, but I don't really understand why this works. How is setting up the VM to listen to port 2222 and then port forward from there to, say, port 80, any different from just telling the VM to listen on port 80 in the first place? FYI, the VMs run Ubuntu Desktop 14.x.

    Read the article

  • WAN Optimization Resources

    - by Paul
    I'm looking for resources on writing software to do WAN optimization. I've googled this and searched SO, but there doesn't seem to be much around. The only things I've found are high-level articles in tech magazines, and info for network admins on how to make use of existing WAN optimization products. I'm looking for something on the techniques etc. used to write WAN optimization software. It seems to be a dark art, and the people who know how to do it, guard their secrets closely. Any suggestions?

    Read the article

  • pfSense with two WANs, routing skype traffic over a specific WAN

    - by Eric
    I have a pfSense setup with two WANs (WAN1 and WAN2) and one LAN network. The two WANs are setup for failover. However, QoS has recently been an issue for skype calls in our office place (about 30 people) so we want to dedicate WAN2 for skype traffic (we use skype for all voip calls, etc.) As Skype is notoriously difficult to deal with, does anyone have any suggestions on how I should deal with this? A simple rile based on ports will not work, and using layer7 inspection witha skype porfile on all incoming LAN packets doesn't seem like the way to go eiter. here is a related pfsense forum post: http://forum.pfsense.org/index.php/topic,50406.msg268520.html#msg268520

    Read the article

  • IPcop Multiple WAN Subnets

    - by obsidian
    We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

    Read the article

  • Fortigate 80C multi wan

    - by emamdouh
    I've Fortigate 80c and two internet lines from two separate ISPs. I'm trying to distribute sessions between both internet lines following http://docs-legacy.fortinet.com/cb/html/index.html#page/FOS_Cookbook/Install_advanced/routing_ecmp_basic.html , but it seems connections go through just one of two internet lines. I have "wan1 as it's configured first, and I could edit static route table to be wan2 instead of wan1", but not both of internet lines I have. Any ideas why this happens? Thanks in advance

    Read the article

  • would a dynamic wan disrupt a static lan?

    - by JohnMerlino
    So I found out that the cable company use the DHCP to assign the public ip address dynamically. So a subscriber's public facing ip address can change during the length of their subscription. Now what if you remove DHCP on a particular computer, which you plan to use as a web server, so that the machine has a static, unchanging IP address. If the public ip address was to change, would this confuse the Network Address Translation (NAT) and cause some sort of disruption? Please answer in layman terms, as I'm still grasping concepts here. thanks.

    Read the article

  • How to configure g-wan to use virtual hosts?

    - by Jan
    Say I have a domain foo.com and a server accessible at 50.60.70.80. I have configured the DNS entries so that foo.com and www.foo.com point to 50.60.70.80. I have g-wan running on the web server. Now I want to host different web sites on foo.com and on www.foo.com. According to the documentation I have to configure a root host and optionally some virtual hosts. So I choose foo.com to be the root host. www.foo.com is a virtual host. My problems is that g-wan seems to ignore my virtual host. No matter whether I use foo.com or ww.foo.com g-wan always serves the foo.com content. This is my g-wan "config": /gwan/0.0.0.0_80/#movq.org /gwan/0.0.0.0_80/$www.movq.org What am I doing wrong here?

    Read the article

  • On a router, how do I block wan access for a particular machine without blocking its access to the local network?

    - by HappyEngineer
    On my tp-link TL-WR1043ND router I want to prevent a particular machine from having access to the WAN while still allowing that machine to access other machines on the LAN. My assumption is that I need to do something in the "Access Control" section, however the problem is that it wants an ip range or domain name for the target of the rule. The router uses DHCP to get an address from the WAN, so I don't have any guarantee what the ip address of the wan will be. If the answer is that it's not possible with this router, could someone describe how to do it using OpenWRT instead?

    Read the article

  • Multiple WAN interfaces in same subnet on Sonicwall NSA220?

    - by Ttamsen
    (eta salutation, which keeps getting eaten.) Hi, all. I see a bunch of related questions, so I'm hesitant to ask, but: I have a situation where I have a Sonicwall NSA220 serving as firewall/router for two internal subnets to two external WAN connections. In some locations this is two separate ISPs. In others, it's the same ISP but with multiple circuits. The problem is that one ISP has been unable to provide unique subnets for each WAN interface. Is there any possibility that I might be able to bond the two WAN interfaces into a single virtual interface, and then use source-routing to get internal subnets communicating out the appropriate physical interface? Or even just use traffic-shaping to give each internal network appropriate shared bandwidth? I haven't found anything in the docs, but it seemed like it might be worth asking. Thanks for any help! -Steve.

    Read the article

  • How do I configure dual WAN links for failover on a Cisco 891?

    - by Donjo
    I have a Cisco 891 that is going to be connected to 2 WAN links, a DSL connection and a cable connection. I'm not so concerned with load balancing between them because the DSL connection speed is a drop in the bucket when compared to the cable speed though it would be nice if it worked that way. I mainly just want to force all traffic through the cable WAN link unless it goes down. I'm not really sure what feature set I should be researching.

    Read the article

  • g-wan - reproducing the performance claims

    - by user2603628
    Using gwan_linux64-bit.tar.bz2 under Ubuntu 12.04 LTS unpacking and running gwan then pointing wrk at it (using a null file null.html) wrk --timeout 10 -t 2 -c 100 -d20s http://127.0.0.1:8080/null.html Running 20s test @ http://127.0.0.1:8080/null.html 2 threads and 100 connections Thread Stats Avg Stdev Max +/- Stdev Latency 11.65s 5.10s 13.89s 83.91% Req/Sec 3.33k 3.65k 12.33k 75.19% 125067 requests in 20.01s, 32.08MB read Socket errors: connect 0, read 37, write 0, timeout 49 Requests/sec: 6251.46 Transfer/sec: 1.60MB .. very poor performance, in fact there seems to be some kind of huge latency issue. During the test gwan is 200% busy and wrk is 67% busy. Pointing at nginx, wrk is 200% busy and nginx is 45% busy: wrk --timeout 10 -t 2 -c 100 -d20s http://127.0.0.1/null.html Thread Stats Avg Stdev Max +/- Stdev Latency 371.81us 134.05us 24.04ms 91.26% Req/Sec 72.75k 7.38k 109.22k 68.21% 2740883 requests in 20.00s, 540.95MB read Requests/sec: 137046.70 Transfer/sec: 27.05MB Pointing weighttpd at nginx gives even faster results: /usr/local/bin/weighttp -k -n 2000000 -c 500 -t 3 http://127.0.0.1/null.html weighttp - a lightweight and simple webserver benchmarking tool starting benchmark... spawning thread #1: 167 concurrent requests, 666667 total requests spawning thread #2: 167 concurrent requests, 666667 total requests spawning thread #3: 166 concurrent requests, 666666 total requests progress: 9% done progress: 19% done progress: 29% done progress: 39% done progress: 49% done progress: 59% done progress: 69% done progress: 79% done progress: 89% done progress: 99% done finished in 7 sec, 13 millisec and 293 microsec, 285172 req/s, 57633 kbyte/s requests: 2000000 total, 2000000 started, 2000000 done, 2000000 succeeded, 0 failed, 0 errored status codes: 2000000 2xx, 0 3xx, 0 4xx, 0 5xx traffic: 413901205 bytes total, 413901205 bytes http, 0 bytes data The server is a virtual 8 core dedicated server (bare metal), under KVM Where do I start looking to identify the problem gwan is having on this platform ? I have tested lighttpd, nginx and node.js on this same OS, and the results are all as one would expect. The server has been tuned in the usual way with expanded ephemeral ports, increased ulimits, adjusted time wait recycling etc.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >