Search Results

Search found 49332 results on 1974 pages for 'web dev'.

Page 1/1974 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Microsoft .NET Web Programming: Web Sites versus Web Applications

    - by SAMIR BHOGAYTA
    In .NET 2.0, Microsoft introduced the Web Site. This was the default way to create a web Project in Visual Studio 2005. In Visual Studio 2008, the Web Application has been restored as the default web Project in Visual Studio/.NET 3.x The Web Site is a file/folder based Project structure. It is designed such that pages are not compiled until they are requested ("on demand"). The advantages to the Web Site are: 1) It is designed to accommodate non-.NET Applications 2) Deployment is as simple as copying files to the target server 3) Any portion of the Web Site can be updated without requiring recompilation of the entire Site. The Web Application is a .dll-based Project structure. ASP.NET pages and supporting files are compiled into assemblies that are then deployed to the target server. Advantages of the Web Application are: 1) Precompiled files do not expose code to an attacker 2) Precompiled files run faster because they are binary data (the Microsoft Intermediate Language, or MSIL) executed by the CLR (Common Language Runtime) 3) References, assemblies, and other project dependencies are built in to the compiled site and automatically managed. They do not need to be manually deployed and/or registered in the Global Assembly Cache: deployment does this for you If you are planning on using automated build and deployment, such as the Team Foundation Server Team Build engine, you will need to have your code in the form of a Web Application. If you have a Web Site, it will not properly compile as a Web Application would. However, all is not lost: it is possible to work around the issue by adding a Web Deployment Project to your Solution and then: a) configuring the Web Deployment Project to precompile your code; and b) configuring your Team Build definition to use the Web Deployment Project as its source for compilation. https://msevents.microsoft.com/cui/WebCastEventDetails.aspx?culture=en-US&EventID=1032380764&CountryCode=US

    Read the article

  • Ubuntu 12.04 Not Recognising Arduino Uno

    - by John Fish
    I recently purchased an arduino uno from sparkfun, and attempted it with a fresh ubuntu 12.04 build. I installed the ide, and it seemed to work fine; I could write the sketches. However, when I plugged the arduino in, it appeared not to recognise it. I should also note that the arduino does draw power from the USB port, as the green "On" light is illuminated. The serial port arduino uno should be "assigned to" is /dev/ttyACM0. However, this did not exist, as upon running ls dev/tty*, I got the following results: /dev/tty /dev/tty23 /dev/tty39 /dev/tty54 /dev/ttyS10 /dev/ttyS26 /dev/tty0 /dev/tty24 /dev/tty4 /dev/tty55 /dev/ttyS11 /dev/ttyS27 /dev/tty1 /dev/tty25 /dev/tty40 /dev/tty56 /dev/ttyS12 /dev/ttyS28 /dev/tty10 /dev/tty26 /dev/tty41 /dev/tty57 /dev/ttyS13 /dev/ttyS29 /dev/tty11 /dev/tty27 /dev/tty42 /dev/tty58 /dev/ttyS14 /dev/ttyS3 /dev/tty12 /dev/tty28 /dev/tty43 /dev/tty59 /dev/ttyS15 /dev/ttyS30 /dev/tty13 /dev/tty29 /dev/tty44 /dev/tty6 /dev/ttyS16 /dev/ttyS31 /dev/tty14 /dev/tty3 /dev/tty45 /dev/tty60 /dev/ttyS17 /dev/ttyS4 /dev/tty15 /dev/tty30 /dev/tty46 /dev/tty61 /dev/ttyS18 /dev/ttyS5 /dev/tty16 /dev/tty31 /dev/tty47 /dev/tty62 /dev/ttyS19 /dev/ttyS6 /dev/tty17 /dev/tty32 /dev/tty48 /dev/tty63 /dev/ttyS2 /dev/ttyS7 /dev/tty18 /dev/tty33 /dev/tty49 /dev/tty7 /dev/ttyS20 /dev/ttyS8 /dev/tty19 /dev/tty34 /dev/tty5 /dev/tty8 /dev/ttyS21 /dev/ttyS9 /dev/tty2 /dev/tty35 /dev/tty50 /dev/tty9 /dev/ttyS22 /dev/tty20 /dev/tty36 /dev/tty51 /dev/ttyprintk /dev/ttyS23 /dev/tty21 /dev/tty37 /dev/tty52 /dev/ttyS0 /dev/ttyS24 /dev/tty22 /dev/tty38 /dev/tty53 /dev/ttyS1 /dev/ttyS25 Any help would be greatly appreciated.

    Read the article

  • dpkg unsatisfied dependencies, now apt-get wants to remove whole system

    - by Bruno Finger
    firstly, I'm sorry for my terminal output in portuguese, but I guess it is still understandable. I am using Ubuntu GNOME 14.04 and I tried to update the GNOME Online Accounts packages by downloading the following .deb files from packages.ubuntu.com for the Ubuntu 14.10 version: libgoa-backend-1.0-dev_3.12.4-1_amd64.deb libgoa-backend-1.0-1_3.12.4-1_amd64.deb libgoa-1.0-dev_3.12.4-1_amd64.deb libgoa-1.0-0b_3.12.4-1_amd64.deb gnome-online-accounts_3.12.4-1_amd64.deb gir1.2-goa-1.0_3.12.4-1_amd64.deb After downloading them in the same folder, I run the command sudo dpkg -i *.deb, but it didn't install the packages, instead it showed errors due to packages which them depend doesn't meet the required version (and Ubuntu have no way to install them since they are not in this version's repositories). So now every time I want to install anything through apt-get, Ubuntu tells me to run apt-get -f install to fix the errors. This is the list of packages it needs to install/uninstall/update: $ sudo apt-get -f install Lendo listas de pacotes... Pronto Construindo árvore de dependências Lendo informação de estado... Pronto Corrigindo dependências... Pronto Os seguintes pacotes foram instalados automaticamente e já não são necessários: # THESE PACKAGES HAVE BEEN PREVIOUSLY INSTALLED AND ARE NO LONGER NECESSARY account-plugin-windows-live gir1.2-gweather-3.0 libatk-bridge2.0-dev libatk1.0-dev libcairo-script-interpreter2 libcairo2-dev libexpat1-dev libfontconfig1-dev libfreetype6-dev libgdk-pixbuf2.0-dev libglib2.0-dev libgtk-3-dev libharfbuzz-dev libharfbuzz-gobject0 libice-dev libpango1.0-dev libpcre3-dev libpcrecpp0 libpixman-1-dev libpng12-dev libpthread-stubs0-dev librest-dev libsm-dev libsoup2.4-dev libwayland-dev libx11-dev libx11-doc libxau-dev libxcb-render0-dev libxcb-shm0-dev libxcb1-dev libxcomposite-dev libxcursor-dev libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxft-dev libxi-dev libxinerama-dev libxkbcommon-dev libxml2-dev libxrandr-dev libxrender-dev pkg-config signon-plugin-password x11proto-composite-dev x11proto-core-dev x11proto-damage-dev x11proto-fixes-dev x11proto-input-dev x11proto-kb-dev x11proto-randr-dev x11proto-render-dev x11proto-xext-dev x11proto-xinerama-dev xorg-sgml-doctools xtrans-dev zlib1g-dev Utilize 'apt-get autoremove' para os remover. Os pacotes extra a seguir serão instalados: # THE FOLLOWING PACKAGES WILL BE INSTALLED debhelper dh-apparmor libatk-bridge2.0-dev libatk1.0-dev libcairo-script-interpreter2 libcairo2-dev libept1.4.12 libexpat1-dev libfontconfig1-dev libfreetype6-dev libgdk-pixbuf2.0-dev libglib2.0-dev libgtk-3-dev libharfbuzz-dev libharfbuzz-gobject0 libice-dev libmail-sendmail-perl libpango1.0-dev libpcre3-dev libpcrecpp0 libpixman-1-dev libpng12-dev libpthread-stubs0-dev librest-dev libsm-dev libsoup2.4-dev libwayland-dev libx11-dev libx11-doc libxau-dev libxcb-render0-dev libxcb-shm0-dev libxcb1-dev libxcomposite-dev libxcursor-dev libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxft-dev libxi-dev libxinerama-dev libxkbcommon-dev libxml2-dev libxrandr-dev libxrender-dev pkg-config po-debconf x11proto-composite-dev x11proto-core-dev x11proto-damage-dev x11proto-fixes-dev x11proto-input-dev x11proto-kb-dev x11proto-randr-dev x11proto-render-dev x11proto-xext-dev x11proto-xinerama-dev xorg-sgml-doctools xtrans-dev zlib1g-dev Pacotes sugeridos: dh-make apparmor-easyprof libcairo2-doc libglib2.0-doc libgtk-3-doc libice-doc libpango1.0-doc imagemagick libsm-doc libsoup2.4-doc libxcb-doc libxext-doc libmail-box-perl Os pacotes a seguir serão REMOVIDOS: # THE FOLLOWING PACKAGES WILL BE REMOVED account-plugin-aim account-plugin-jabber account-plugin-salut account-plugin-yahoo empathy evolution evolution-data-server evolution-data-server-online-accounts evolution-indicator evolution-plugins gdm gir1.2-gdata-0.0 gir1.2-goa-1.0 gir1.2-zpj-0.0 gnome-contacts gnome-control-center gnome-documents gnome-online-accounts gnome-online-miners gnome-shell gnome-shell-extension-weather gnome-shell-extensions grilo-plugins-0.2 gvfs-backends-goa libevolution libfolks-eds25 libgdata13 libgoa-1.0-0b libgoa-1.0-dev libgoa-backend-1.0-1 libgoa-backend-1.0-dev libzapojit-0.0-0 mcp-account-manager-uoa nautilus-sendto-empathy ubuntu-gnome-desktop Os NOVOS pacotes a seguir serão instalados: # THE NEW FOLLOWING PACKAGES WILL BE INSTALLED debhelper dh-apparmor libatk-bridge2.0-dev libatk1.0-dev libcairo-script-interpreter2 libcairo2-dev libept1.4.12 libexpat1-dev libfontconfig1-dev libfreetype6-dev libgdk-pixbuf2.0-dev libglib2.0-dev libgtk-3-dev libharfbuzz-dev libharfbuzz-gobject0 libice-dev libmail-sendmail-perl libpango1.0-dev libpcre3-dev libpcrecpp0 libpixman-1-dev libpng12-dev libpthread-stubs0-dev librest-dev libsm-dev libsoup2.4-dev libwayland-dev libx11-dev libx11-doc libxau-dev libxcb-render0-dev libxcb-shm0-dev libxcb1-dev libxcomposite-dev libxcursor-dev libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxft-dev libxi-dev libxinerama-dev libxkbcommon-dev libxml2-dev libxrandr-dev libxrender-dev pkg-config po-debconf x11proto-composite-dev x11proto-core-dev x11proto-damage-dev x11proto-fixes-dev x11proto-input-dev x11proto-kb-dev x11proto-randr-dev x11proto-render-dev x11proto-xext-dev x11proto-xinerama-dev xorg-sgml-doctools xtrans-dev zlib1g-dev 0 pacotes atualizados, 61 pacotes novos instalados, 35 a serem removidos e 22 não atualizados. 7 pacotes não totalmente instalados ou removidos. É preciso baixar 12,0 MB de arquivos. Depois desta operação, 25,0 MB adicionais de espaço em disco serão usados. Você quer continuar? [S/n] Along packages needed to be removed are even gdm. This is 100% sure to make the system useless. What can I do to fix this issue? I don't care if I can't install the new version of goa anymore.

    Read the article

  • Is it safe to install Compiz Experimental Plugins 0.1.1 on Maverick?

    - by litvin05
    Does anyone have these plugins installed? Sorry, but I'm worried, because my past attempts to update compiz have failed, and when I try to install these plugins they ask to me to update these files: compiz-dev compiz-fusion-bcop debhelper html2text intltool-debian libcairo-gobject2 libcairo2-dev libdecoration0-dev libdrm-dev libexpat1-dev libfontconfig1-dev libfreetype6-dev libgl1-mesa-dev libglu1-mesa-dev libice-dev libkms1 libmail-sendmail-perl libpango1.0-dev libpixman-1-dev libpng12-dev libsm-dev libstartup-notification0-dev libsys-hostname-long-perl libx11-xcb-dev libxcb-render0-dev libxcb-shm0-dev libxcomposite-dev libxcursor-dev libxdamage-dev libxext-dev libxfixes-dev libxft-dev libxinerama-dev libxml2-dev libxrandr-dev libxrender-dev libxslt1-dev libxss-dev mesa-common-dev po-debconf x11proto-composite-dev x11proto-damage-dev x11proto-fixes-dev x11proto-randr-dev x11proto-render-dev x11proto-scrnsaver-dev x11proto-xext-dev x11proto-xinerama-dev Please answer my question, and I'll be very grateful! These Plugins are here

    Read the article

  • Why is Java EE 6 better than Spring ?

    - by arungupta
    Java EE 6 was released over 2 years ago and now there are 14 compliant application servers. In all my talks around the world, a question that is frequently asked is Why should I use Java EE 6 instead of Spring ? There are already several blogs covering that topic: Java EE wins over Spring by Bill Burke Why will I use Java EE instead of Spring in new Enterprise Java projects in 2012 ? by Kai Waehner (more discussion on TSS) Spring to Java EE migration (Part 1 and 2, 3 and 4 coming as well) by David Heffelfinger Spring to Java EE - A Migration Experience by Lincoln Baxter Migrating Spring to Java EE 6 by Bert Ertman and Paul Bakker at NLJUG Moving from Spring to Java EE 6 - The Age of Frameworks is Over at TSS Java EE vs Spring Shootout by Rohit Kelapure and Reza Rehman at JavaOne 2011 Java EE 6 and the Ewoks by Murat Yener Definite excuse to avoid Spring forever - Bert Ertman and Arun Gupta I will try to share my perspective in this blog. First of all, I'd like to start with a note: Thank you Spring framework for filling the interim gap and providing functionality that is now included in the mainstream Java EE 6 application servers. The Java EE platform has evolved over the years learning from frameworks like Spring and provides all the functionality to build an enterprise application. Thank you very much Spring framework! While Spring was revolutionary in its time and is still very popular and quite main stream in the same way Struts was circa 2003, it really is last generation's framework - some people are even calling it legacy. However my theory is "code is king". So my approach is to build/take a simple Hello World CRUD application in Java EE 6 and Spring and compare the deployable artifacts. I started looking at the official tutorial Developing a Spring Framework MVC Application Step-by-Step but it is using the older version 2.5. I wasn't able to find any updated version in the current 3.1 release. Next, I downloaded Spring Tool Suite and thought that would provide some template samples to get started. A least a quick search did not show any handy tutorials - either video or text-based. So I searched and found a link to their SVN repository at src.springframework.org/svn/spring-samples/. I tried the "mvc-basic" sample and the generated WAR file was 4.43 MB. While it was named a "basic" sample it seemed to come with 19 different libraries bundled but it was what I could find: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/joda-time-jsptags-1.0.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar And it is not even using any database! The app deployed fine on GlassFish 3.1.2 but the "@Controller Example" link did not work as it was missing the context root. With a bit of tweaking I could deploy the application and assume that the account got created because no error was displayed in the browser or server log. Next I generated the WAR for "mvc-ajax" and the 5.1 MB WAR had 20 JARs (1 removed, 2 added): ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.6.4.jar./WEB-INF/lib/jackson-mapper-asl-1.6.4.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar 2 more JARs for just doing Ajax. Anyway, deploying this application gave the following error: Caused by: java.lang.NoSuchMethodError: org.codehaus.jackson.map.SerializationConfig.<init>(Lorg/codehaus/jackson/map/ClassIntrospector;Lorg/codehaus/jackson/map/AnnotationIntrospector;Lorg/codehaus/jackson/map/introspect/VisibilityChecker;Lorg/codehaus/jackson/map/jsontype/SubtypeResolver;)V    at org.springframework.samples.mvc.ajax.json.ConversionServiceAwareObjectMapper.<init>(ConversionServiceAwareObjectMapper.java:20)    at org.springframework.samples.mvc.ajax.json.JacksonConversionServiceConfigurer.postProcessAfterInitialization(JacksonConversionServiceConfigurer.java:40)    at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsAfterInitialization(AbstractAutowireCapableBeanFactory.java:407) Seems like some incorrect repos in the "pom.xml". Next one is "mvc-showcase" and the 6.49 MB WAR now has 28 JARs as shown below: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/aspectjrt-1.6.10.jar./WEB-INF/lib/commons-fileupload-1.2.2.jar./WEB-INF/lib/commons-io-2.0.1.jar./WEB-INF/lib/el-api-2.2.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.8.1.jar./WEB-INF/lib/jackson-mapper-asl-1.8.1.jar./WEB-INF/lib/javax.inject-1.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/jdom-1.0.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-api-1.2.jar./WEB-INF/lib/jstl-impl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/rome-1.0.0.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.1.0.RELEASE.jar./WEB-INF/lib/spring-asm-3.1.0.RELEASE.jar./WEB-INF/lib/spring-beans-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-support-3.1.0.RELEASE.jar./WEB-INF/lib/spring-core-3.1.0.RELEASE.jar./WEB-INF/lib/spring-expression-3.1.0.RELEASE.jar./WEB-INF/lib/spring-web-3.1.0.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.1.0.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar The app at least deployed and showed results this time. But still no database! Next I tried building "jpetstore" and got the error: [ERROR] Failed to execute goal on project org.springframework.samples.jpetstore:Could not resolve dependencies for project org.springframework.samples:org.springframework.samples.jpetstore:war:1.0.0-SNAPSHOT: Failed to collect dependencies for [commons-fileupload:commons-fileupload:jar:1.2.1 (compile), org.apache.struts:com.springsource.org.apache.struts:jar:1.2.9 (compile), javax.xml.rpc:com.springsource.javax.xml.rpc:jar:1.1.0 (compile), org.apache.commons:com.springsource.org.apache.commons.dbcp:jar:1.2.2.osgi (compile), commons-io:commons-io:jar:1.3.2 (compile), hsqldb:hsqldb:jar:1.8.0.7 (compile), org.apache.tiles:tiles-core:jar:2.2.0 (compile), org.apache.tiles:tiles-jsp:jar:2.2.0 (compile), org.tuckey:urlrewritefilter:jar:3.1.0 (compile), org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-orm:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-context-support:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework.webflow:spring-js:jar:2.0.7.RELEASE (compile), org.apache.ibatis:com.springsource.com.ibatis:jar:2.3.4.726 (runtime), com.caucho:com.springsource.com.caucho:jar:3.2.1 (compile), org.apache.axis:com.springsource.org.apache.axis:jar:1.4.0 (compile), javax.wsdl:com.springsource.javax.wsdl:jar:1.6.1 (compile), javax.servlet:jstl:jar:1.2 (runtime), org.aspectj:aspectjweaver:jar:1.6.5 (compile), javax.servlet:servlet-api:jar:2.5 (provided), javax.servlet.jsp:jsp-api:jar:2.1 (provided), junit:junit:jar:4.6 (test)]: Failed to read artifact descriptor for org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT: Could not transfer artifact org.springframework:spring-webmvc:pom:3.0.0.BUILD-SNAPSHOT from/to JBoss repository (http://repository.jboss.com/maven2): Access denied to: http://repository.jboss.com/maven2/org/springframework/spring-webmvc/3.0.0.BUILD-SNAPSHOT/spring-webmvc-3.0.0.BUILD-SNAPSHOT.pom It appears the sample is broken - maybe I was pulling from the wrong repository - would be great if someone were to point me at a good target to use here. With a 50% hit on samples in this repository, I started searching through numerous blogs, most of which have either outdated information (using XML-heavy Spring 2.5), some piece of configuration (which is a typical "feature" of Spring) is missing, or too much complexity in the sample. I finally found this blog that worked like a charm. This blog creates a trivial Spring MVC 3 application using Hibernate and MySQL. This application performs CRUD operations on a single table in a database using typical Spring technologies.  I downloaded the sample code from the blog, deployed it on GlassFish 3.1.2 and could CRUD the "person" entity. The source code for this application can be downloaded here. More details on the application statistics below. And then I built a similar CRUD application in Java EE 6 using NetBeans wizards in a couple of minutes. The source code for the application can be downloaded here and the WAR here. The Spring Source Tool Suite may also offer similar wizard-driven capabilities but this blog focus primarily on comparing the runtimes. The lack of STS tutorials was slightly disappointing as well. NetBeans however has tons of text-based and video tutorials and tons of material even by the community. One more bit on the download size of tools bundle ... NetBeans 7.1.1 "All" is 211 MB (which includes GlassFish and Tomcat) Spring Tool Suite  2.9.0 is 347 MB (~ 65% bigger) This blog is not about the tooling comparison so back to the Java EE 6 version of the application .... In order to run the Java EE version on GlassFish, copy the MySQL Connector/J to glassfish3/glassfish/domains/domain1/lib/ext directory and create a JDBC connection pool and JDBC resource as: ./bin/asadmin create-jdbc-connection-pool --datasourceclassname \\ com.mysql.jdbc.jdbc2.optional.MysqlDataSource --restype \\ javax.sql.DataSource --property \\ portNumber=3306:user=mysql:password=mysql:databaseName=mydatabase \\ myConnectionPool ./bin/asadmin create-jdbc-resource --connectionpoolid myConnectionPool jdbc/myDataSource I generated WARs for the two projects and the table below highlights some differences between them: Java EE 6 Spring WAR File Size 0.021030 MB 10.87 MB (~516x) Number of files 20 53 (> 2.5x) Bundled libraries 0 36 Total size of libraries 0 12.1 MB XML files 3 5 LoC in XML files 50 (11 + 15 + 24) 129 (27 + 46 + 16 + 11 + 19) (~ 2.5x) Total .properties files 1 Bundle.properties 2 spring.properties, log4j.properties Cold Deploy 5,339 ms 11,724 ms Second Deploy 481 ms 6,261 ms Third Deploy 528 ms 5,484 ms Fourth Deploy 484 ms 5,576 ms Runtime memory ~73 MB ~101 MB Some points worth highlighting from the table ... 516x WAR file, 10x deployment time - With 12.1 MB of libraries (for a very basic application) bundled in your application, the WAR file size and the deployment time will naturally go higher. The WAR file for Spring-based application is 516x bigger and the deployment time is double during the first deployment and ~ 10x during subsequent deployments. The Java EE 6 application is fully portable and will run on any Java EE 6 compliant application server. 36 libraries in the WAR - There are 14 Java EE 6 compliant application servers today. Each of those servers provide all the functionality like transactions, dependency injection, security, persistence, etc typically required of an enterprise or web application. There is no need to bundle 36 libraries worth 12.1 MB for a trivial CRUD application. These 14 compliant application servers provide all the functionality baked in. Now you can also deploy these libraries in the container but then you don't get the "portability" offered by Spring in that case. Does your typical Spring deployment actually do that ? 3x LoC in XML - The number of XML files is about 1.6x and the LoC is ~ 2.5x. So much XML seems circa 2003 when the Java language had no annotations. The XML files can be further reduced, e.g. faces-config.xml can be replaced without providing i18n, but I just want to compare stock applications. Memory usage - Both the applications were deployed on default GlassFish 3.1.2 installation and any additional memory consumed as part of deployment/access was attributed to the application. This is by no means scientific but at least provides an initial ballpark. This area definitely needs more investigation. Another table that compares typical Java EE 6 compliant application servers and the custom-stack created for a Spring application ... Java EE 6 Spring Web Container ? 53 MB (tcServer 2.6.3 Developer Edition) Security ? 12 MB (Spring Security 3.1.0) Persistence ? 6.3 MB (Hibernate 4.1.0, required) Dependency Injection ? 5.3 MB (Framework) Web Services ? 796 KB (Spring WS 2.0.4) Messaging ? 3.4 MB (RabbitMQ Server 2.7.1) 936 KB (Java client 936) OSGi ? 1.3 MB (Spring OSGi 1.2.1) GlassFish and WebLogic (starting at 33 MB) 83.3 MB There are differentiating factors on both the stacks. But most of the functionality like security, persistence, and dependency injection is baked in a Java EE 6 compliant application server but needs to be individually managed and patched for a Spring application. This very quickly leads to a "stack explosion". The Java EE 6 servers are tested extensively on a variety of platforms in different combinations whereas a Spring application developer is responsible for testing with different JDKs, Operating Systems, Versions, Patches, etc. Oracle has both the leading OSS lightweight server with GlassFish and the leading enterprise Java server with WebLogic Server, both Java EE 6 and both with lightweight deployment options. The Web Container offered as part of a Java EE 6 application server not only deploys your enterprise Java applications but also provide operational management, diagnostics, and mission-critical capabilities required by your applications. The Java EE 6 platform also introduced the Web Profile which is a subset of the specifications from the entire platform. It is targeted at developers of modern web applications offering a reasonably complete stack, composed of standard APIs, and is capable out-of-the-box of addressing the needs of a large class of Web applications. As your applications grow, the stack can grow to the full Java EE 6 platform. The GlassFish Server Web Profile starting at 33MB (smaller than just the non-standard tcServer) provides most of the functionality typically required by a web application. WebLogic provides battle-tested functionality for a high throughput, low latency, and enterprise grade web application. No individual managing or patching, all tested and commercially supported for you! Note that VMWare does have a server, tcServer, but it is non-standard and not even certified to the level of the standard Web Profile most customers expect these days. Customers who choose this risk proprietary lock-in since VMWare does not seem to want to formally certify with either Java EE 6 Enterprise Platform or with Java EE 6 Web Profile but of course it would be great if they were to join the community and help their customers reduce the risk of deploying on VMWare software. Some more points to help you decide choose between Java EE 6 and Spring ... Freedom to choose container - There are 14 Java EE 6 compliant application servers today, with a variety of open source and commercial offerings. A Java EE 6 application can be deployed on any of those containers. So if you deployed your application on GlassFish today and would like to scale up with your demands then you can deploy the same application to WebLogic. And because of the portability of a Java EE 6 application, you can even take it a different vendor altogether. Spring requires a runtime which could be any of these app servers as well. But why use Spring when all the required functionality is already baked into the application server itself ? Spring also has a different definition of portability where they claim to bundle all the libraries in the WAR file and move to any application server. But we saw earlier how bloated that archive could be. The equivalent features in Spring runtime offerings (mainly tcServer) are not all open source, not as mature, and often require manual assembly.  Vendor choice - The Java EE 6 platform is created using the Java Community Process where all the big players like Oracle, IBM, RedHat, and Apache are conritbuting to make the platform successful. Each application server provides the basic Java EE 6 platform compliance and has its own competitive offerings. This allows you to choose an application server for deploying your Java EE 6 applications. If you are not happy with the support or feature of one vendor then you can move your application to a different vendor because of the portability promise offered by the platform. Spring is a set of products from a single company, one price book, one support organization, one sustaining organization, one sales organization, etc. If any of those cause a customer headache, where do you go ? Java EE, backed by multiple vendors, is a safer bet for those that are risk averse. Production support - With Spring, typically you need to get support from two vendors - VMWare and the container provider. With Java EE 6, all of this is typically provided by one vendor. For example, Oracle offers commercial support from systems, operating systems, JDK, application server, and applications on top of them. VMWare certainly offers complete production support but do you really want to put all your eggs in one basket ? Do you really use tcServer ? ;-) Maintainability - With Spring, you are likely building your own distribution with multiple JAR files, integrating, patching, versioning, etc of all those components. Spring's claim is that multiple JAR files allow you to go à la carte and pick the latest versions of different components. But who is responsible for testing whether all these versions work together ? Yep, you got it, its YOU! If something does not work, who patches and maintains the JARs ? Of course, you! Commercial support for such a configuration ? On your own! The Java EE application servers manage all of this for you and provide a well-tested and commercially supported bundle. While it is always good to realize that there is something new and improved that updates and replaces older frameworks like Spring, the good news is not only does a Java EE 6 container offer what is described here, most also will let you deploy and run your Spring applications on them while you go through an upgrade to a more modern architecture. End result, you get the best of both worlds - keeping your legacy investment but moving to a more agile, lightweight world of Java EE 6. A message to the Spring lovers ... The complexity in J2EE 1.2, 1.3, and 1.4 led to the genesis of Spring but that was in 2004. This is 2012 and the name has changed to "Java EE 6" :-) There are tons of improvements in the Java EE platform to make it easy-to-use and powerful. Some examples: Adding @Stateless on a POJO makes it an EJB EJBs can be packaged in a WAR with no special packaging or deployment descriptors "web.xml" and "faces-config.xml" are optional in most of the common cases Typesafe dependency injection is now part of the Java EE platform Add @Path on a POJO allows you to publish it as a RESTful resource EJBs can be used as backing beans for Facelets-driven JSF pages providing full MVC Java EE 6 WARs are known to be kilobytes in size and deployed in milliseconds Tons of other simplifications in the platform and application servers So if you moved away from J2EE to Spring many years ago and have not looked at Java EE 6 (which has been out since Dec 2009) then you should definitely try it out. Just be at least aware of what other alternatives are available instead of restricting yourself to one stack. Here are some workshops and screencasts worth trying: screencast #37 shows how to build an end-to-end application using NetBeans screencast #36 builds the same application using Eclipse javaee-lab-feb2012.pdf is a 3-4 hours self-paced hands-on workshop that guides you to build a comprehensive Java EE 6 application using NetBeans Each city generally has a "spring cleanup" program every year. It allows you to clean up the mess from your house. For your software projects, you don't need to wait for an annual event, just get started and reduce the technical debt now! Move away from your legacy Spring-based applications to a lighter and more modern approach of building enterprise Java applications using Java EE 6. Watch this beautiful presentation that explains how to migrate from Spring -> Java EE 6: List of files in the Java EE 6 project: ./index.xhtml./META-INF./person./person/Create.xhtml./person/Edit.xhtml./person/List.xhtml./person/View.xhtml./resources./resources/css./resources/css/jsfcrud.css./template.xhtml./WEB-INF./WEB-INF/classes./WEB-INF/classes/Bundle.properties./WEB-INF/classes/META-INF./WEB-INF/classes/META-INF/persistence.xml./WEB-INF/classes/org./WEB-INF/classes/org/javaee./WEB-INF/classes/org/javaee/javaeemysql./WEB-INF/classes/org/javaee/javaeemysql/AbstractFacade.class./WEB-INF/classes/org/javaee/javaeemysql/Person.class./WEB-INF/classes/org/javaee/javaeemysql/Person_.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$1.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$PersonControllerConverter.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController.class./WEB-INF/classes/org/javaee/javaeemysql/PersonFacade.class./WEB-INF/classes/org/javaee/javaeemysql/util./WEB-INF/classes/org/javaee/javaeemysql/util/JsfUtil.class./WEB-INF/classes/org/javaee/javaeemysql/util/PaginationHelper.class./WEB-INF/faces-config.xml./WEB-INF/web.xml List of files in the Spring 3.x project: ./META-INF ./META-INF/MANIFEST.MF./WEB-INF./WEB-INF/applicationContext.xml./WEB-INF/classes./WEB-INF/classes/log4j.properties./WEB-INF/classes/org./WEB-INF/classes/org/krams ./WEB-INF/classes/org/krams/tutorial ./WEB-INF/classes/org/krams/tutorial/controller ./WEB-INF/classes/org/krams/tutorial/controller/MainController.class ./WEB-INF/classes/org/krams/tutorial/domain ./WEB-INF/classes/org/krams/tutorial/domain/Person.class ./WEB-INF/classes/org/krams/tutorial/service ./WEB-INF/classes/org/krams/tutorial/service/PersonService.class ./WEB-INF/hibernate-context.xml ./WEB-INF/hibernate.cfg.xml ./WEB-INF/jsp ./WEB-INF/jsp/addedpage.jsp ./WEB-INF/jsp/addpage.jsp ./WEB-INF/jsp/deletedpage.jsp ./WEB-INF/jsp/editedpage.jsp ./WEB-INF/jsp/editpage.jsp ./WEB-INF/jsp/personspage.jsp ./WEB-INF/lib ./WEB-INF/lib/antlr-2.7.6.jar ./WEB-INF/lib/aopalliance-1.0.jar ./WEB-INF/lib/c3p0-0.9.1.2.jar ./WEB-INF/lib/cglib-nodep-2.2.jar ./WEB-INF/lib/commons-beanutils-1.8.3.jar ./WEB-INF/lib/commons-collections-3.2.1.jar ./WEB-INF/lib/commons-digester-2.1.jar ./WEB-INF/lib/commons-logging-1.1.1.jar ./WEB-INF/lib/dom4j-1.6.1.jar ./WEB-INF/lib/ejb3-persistence-1.0.2.GA.jar ./WEB-INF/lib/hibernate-annotations-3.4.0.GA.jar ./WEB-INF/lib/hibernate-commons-annotations-3.1.0.GA.jar ./WEB-INF/lib/hibernate-core-3.3.2.GA.jar ./WEB-INF/lib/javassist-3.7.ga.jar ./WEB-INF/lib/jstl-1.1.2.jar ./WEB-INF/lib/jta-1.1.jar ./WEB-INF/lib/junit-4.8.1.jar ./WEB-INF/lib/log4j-1.2.14.jar ./WEB-INF/lib/mysql-connector-java-5.1.14.jar ./WEB-INF/lib/persistence-api-1.0.jar ./WEB-INF/lib/slf4j-api-1.6.1.jar ./WEB-INF/lib/slf4j-log4j12-1.6.1.jar ./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-jdbc-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-orm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-tx-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar ./WEB-INF/lib/standard-1.1.2.jar ./WEB-INF/lib/xml-apis-1.0.b2.jar ./WEB-INF/spring-servlet.xml ./WEB-INF/spring.properties ./WEB-INF/web.xml So, are you excited about Java EE 6 ? Want to get started now ? Here are some resources: Java EE 6 SDK (including runtime, samples, tutorials etc) GlassFish Server Open Source Edition 3.1.2 (Community) Oracle GlassFish Server 3.1.2 (Commercial) Java EE 6 using WebLogic 12c and NetBeans (Video) Java EE 6 with NetBeans and GlassFish (Video) Java EE with Eclipse and GlassFish (Video)

    Read the article

  • Device or resource busy errors when setting up a RAID array

    - by JGazlyVFX
    I'm trying to create a Raid array and these are the errors I keep getting. I have repartitioned the drives several times. root@BitchStewie:/dev# sudo mdadm --verbose --create /dev/md1 --chunk=64 --level=0 --raid-devices=12 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1 /dev/sdi1 /dev/sdj1 /dev/sdk1 /dev/sdl1 /dev/sdm1 mdadm: super1.x cannot open /dev/sdb1: Device or resource busy mdadm: ddf: Cannot use /dev/sdb1: Device or resource busy mdadm: Cannot use /dev/sdb1: It is busy mdadm: device /dev/sdb1 not suitable for any style of array

    Read the article

  • Web 2.0 Extension for ASP.NET

    - by Visual WebGui
    ASP.NET is now much extended to support line of business and data centric applications, providing Web 2.0 rich user interfaces within a native web environment. New capabilities allowed by the Visual WebGui extension turn Visual Studio into a rapid development tool for the web, leveraging the wide set of ASP.NET web infrastructures runtime and extending its paradigms to support highly interactive applications. Taking advantage of the ASP.NET infrastructures Using the native ASP.NET ISAPI filter: aspnet_isapi...(read more)

    Read the article

  • Install usblib package - Ubuntu

    - by Tom celic
    I need the package libusb for another package I am installing. I tried the following which seemed to install the package, sudo apt-get install libusb-dev but when I try to install the other package I get, configure: error: Package requirements (libusb-1.0 >= 0.9.1) were not met: No package 'libusb-1.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBUSB_CFLAGS and LIBUSB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. When I run the command dpkg -L libusb-dev, I get: /. /usr /usr/bin /usr/bin/libusb-config /usr/include /usr/include/usb.h /usr/lib /usr/lib/libusb.a /usr/lib/libusb.la /usr/lib/pkgconfig /usr/lib/pkgconfig/libusb.pc /usr/share /usr/share/doc /usr/share/doc/libusb-dev /usr/share/doc/libusb-dev/html /usr/share/doc/libusb-dev/html/index.html /usr/share/doc/libusb-dev/html/preface.html /usr/share/doc/libusb-dev/html/intro.html /usr/share/doc/libusb-dev/html/intro-overview.html /usr/share/doc/libusb-dev/html/intro-support.html /usr/share/doc/libusb-dev/html/api.html /usr/share/doc/libusb-dev/html/api-device-interfaces.html /usr/share/doc/libusb-dev/html/api-timeouts.html /usr/share/doc/libusb-dev/html/api-types.html /usr/share/doc/libusb-dev/html/api-synchronous.html /usr/share/doc/libusb-dev/html/api-return-values.html /usr/share/doc/libusb-dev/html/functions.html /usr/share/doc/libusb-dev/html/ref.core.html /usr/share/doc/libusb-dev/html/function.usbinit.html /usr/share/doc/libusb-dev/html/function.usbfindbusses.html /usr/share/doc/libusb-dev/html/function.usbfinddevices.html /usr/share/doc/libusb-dev/html/function.usbgetbusses.html /usr/share/doc/libusb-dev/html/ref.deviceops.html /usr/share/doc/libusb-dev/html/function.usbopen.html /usr/share/doc/libusb-dev/html/function.usbclose.html /usr/share/doc/libusb-dev/html/function.usbsetconfiguration.html /usr/share/doc/libusb-dev/html/function.usbsetaltinterface.html /usr/share/doc/libusb-dev/html/function.usbresetep.html /usr/share/doc/libusb-dev/html/function.usbclearhalt.html /usr/share/doc/libusb-dev/html/function.usbreset.html /usr/share/doc/libusb-dev/html/function.usbclaiminterface.html /usr/share/doc/libusb-dev/html/function.usbreleaseinterface.html /usr/share/doc/libusb-dev/html/ref.control.html /usr/share/doc/libusb-dev/html/function.usbcontrolmsg.html /usr/share/doc/libusb-dev/html/function.usbgetstring.html /usr/share/doc/libusb-dev/html/function.usbgetstringsimple.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptor.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptorbyendpoint.html /usr/share/doc/libusb-dev/html/ref.bulk.html /usr/share/doc/libusb-dev/html/function.usbbulkwrite.html /usr/share/doc/libusb-dev/html/function.usbbulkread.html /usr/share/doc/libusb-dev/html/ref.interrupt.html /usr/share/doc/libusb-dev/html/function.usbinterruptwrite.html /usr/share/doc/libusb-dev/html/function.usbinterruptread.html /usr/share/doc/libusb-dev/html/ref.nonportable.html /usr/share/doc/libusb-dev/html/function.usbgetdrivernp.html /usr/share/doc/libusb-dev/html/function.usbdetachkerneldrivernp.html /usr/share/doc/libusb-dev/html/examples.html /usr/share/doc/libusb-dev/html/examples-code.html /usr/share/doc/libusb-dev/html/examples-tests.html /usr/share/doc/libusb-dev/html/examples-other.html /usr/share/doc/libusb-dev/copyright /usr/share/doc-base /usr/share/doc-base/libusb-dev /usr/share/man /usr/share/man/man1 /usr/share/man/man1/libusb-config.1.gz /usr/lib/libusb.so /usr/share/doc/libusb-dev/changelog.Debian.gz Any ideas??

    Read the article

  • Please guide this self-taught Web Developer.

    - by ChickenPuke
    One of the major regrets in life is that I didn't do something with my introversion. I didn't manage to get past the first year of college because of that. I have chosen the path where there are no video games and other time sinks, all I have is the internet to quench my thirst of learning the ins and outs of the field of Web Developing/Designing. Though currently, I'm taking a Web Design Associate course at one of the best Computer Arts and this is the last month of the class. Even though I'm still a sapling, I love this field so much. So basically, At school I'm learning web design while at home I'm teaching myself web-developing. First thing first, returning to college seems impossible at the moment because of some financial problems. I'm pretty comfortable with CSS and HTML and I'm into PHP/MySQL at the moment. Could you please provide me a web-development Curriculum to follow. And do I need to learn about the theories behind? And I think I'm still young(I'm 18 at the time of writing). Is it a good thing or bad thing for choosing this path? I'm glad with my decision but in all honesty, I'm worrying about my future and employment because I'm an undergrad, coming from a country where companies are degree b!tches, it saddens me so. Thank you. (My questions are the bold parts. )

    Read the article

  • Best Web Site Copying Software

    - by GregH
    I just wanted to get some opinions on the best "web site copying" software out there (free or commercial is fine). I have a site that I've recently become responsible for managing, and the previous consultant has not provided operating system access. As such, the plan is to re-host the web site. I realize there are a lot of different issues to consider in doing this. However, I don't have much choice in the matter now. The plan is to use web site copying software (ala HTTrack) to "rip" the web site, and then modify what is downloaded back in to a maintainable site. This, of course, involves HTML, css, javascript, etc on the front-end. I'd like to recover as much of the site as possible to make re-creating it as easy as possible. Your input is appreciated. Input on my approach is also appreciated. Thanks!

    Read the article

  • integration of dynamic forms for 3rd party web apps

    - by afr0
    I've a custom web forms definition interface where I user can define bespoke web forms and those webforms are then rendered on the other part of the my web app. It works well as I can render and submit my forms dynamically. However I have a scenario where there will be different 3rd party apps should be interacting with my custom forms. So the quesion arises how can I have my client side web forms and the fields within to work with the 3rd party interfaces on the fly. Any idea in that regard or best practice will be highly appreciated.

    Read the article

  • Where does ASP.NET Web API Fit?

    - by Rick Strahl
    With the pending release of ASP.NET MVC 4 and the new ASP.NET Web API, there has been a lot of discussion of where the new Web API technology fits in the ASP.NET Web stack. There are a lot of choices to build HTTP based applications available now on the stack - we've come a long way from when WebForms and Http Handlers/Modules where the only real options. Today we have WebForms, MVC, ASP.NET Web Pages, ASP.NET AJAX, WCF REST and now Web API as well as the core ASP.NET runtime to choose to build HTTP content with. Web API definitely squarely addresses the 'API' aspect - building consumable services - rather than HTML content, but even to that end there are a lot of choices you have today. So where does Web API fit, and when doesn't it? But before we get into that discussion, let's talk about what a Web API is and why we should care. What's a Web API? HTTP 'APIs' (Microsoft's new terminology for a service I guess)  are becoming increasingly more important with the rise of the many devices in use today. Most mobile devices like phones and tablets run Apps that are using data retrieved from the Web over HTTP. Desktop applications are also moving in this direction with more and more online content and synching moving into even traditional desktop applications. The pending Windows 8 release promises an app like platform for both the desktop and other devices, that also emphasizes consuming data from the Cloud. Likewise many Web browser hosted applications these days are relying on rich client functionality to create and manipulate the browser user interface, using AJAX rather than server generated HTML data to load up the user interface with data. These mobile or rich Web applications use their HTTP connection to return data rather than HTML markup in the form of JSON or XML typically. But an API can also serve other kinds of data, like images or other binary files, or even text data and HTML (although that's less common). A Web API is what feeds rich applications with data. ASP.NET Web API aims to service this particular segment of Web development by providing easy semantics to route and handle incoming requests and an easy to use platform to serve HTTP data in just about any content format you choose to create and serve from the server. But .NET already has various HTTP Platforms The .NET stack already includes a number of technologies that provide the ability to create HTTP service back ends, and it has done so since the very beginnings of the .NET platform. From raw HTTP Handlers and Modules in the core ASP.NET runtime, to high level platforms like ASP.NET MVC, Web Forms, ASP.NET AJAX and the WCF REST engine (which technically is not ASP.NET, but can integrate with it), you've always been able to handle just about any kind of HTTP request and response with ASP.NET. The beauty of the raw ASP.NET platform is that it provides you everything you need to build just about any type of HTTP application you can dream up from low level APIs/custom engines to high level HTML generation engine. ASP.NET as a core platform clearly has stood the test of time 10+ years later and all other frameworks like Web API are built on top of this ASP.NET core. However, although it's possible to create Web APIs / Services using any of the existing out of box .NET technologies, none of them have been a really nice fit for building arbitrary HTTP based APIs. Sure, you can use an HttpHandler to create just about anything, but you have to build a lot of plumbing to build something more complex like a comprehensive API that serves a variety of requests, handles multiple output formats and can easily pass data up to the server in a variety of ways. Likewise you can use ASP.NET MVC to handle routing and creating content in various formats fairly easily, but it doesn't provide a great way to automatically negotiate content types and serve various content formats directly (it's possible to do with some plumbing code of your own but not built in). Prior to Web API, Microsoft's main push for HTTP services has been WCF REST, which was always an awkward technology that had a severe personality conflict, not being clear on whether it wanted to be part of WCF or purely a separate technology. In the end it didn't do either WCF compatibility or WCF agnostic pure HTTP operation very well, which made for a very developer-unfriendly environment. Personally I didn't like any of the implementations at the time, so much so that I ended up building my own HTTP service engine (as part of the West Wind Web Toolkit), as have a few other third party tools that provided much better integration and ease of use. With the release of Web API for the first time I feel that I can finally use the tools in the box and not have to worry about creating and maintaining my own toolkit as Web API addresses just about all the features I implemented on my own and much more. ASP.NET Web API provides a better HTTP Experience ASP.NET Web API differentiates itself from the previous Microsoft in-box HTTP service solutions in that it was built from the ground up around the HTTP protocol and its messaging semantics. Unlike WCF REST or ASP.NET AJAX with ASMX, it’s a brand new platform rather than bolted on technology that is supposed to work in the context of an existing framework. The strength of the new ASP.NET Web API is that it combines the best features of the platforms that came before it, to provide a comprehensive and very usable HTTP platform. Because it's based on ASP.NET and borrows a lot of concepts from ASP.NET MVC, Web API should be immediately familiar and comfortable to most ASP.NET developers. Here are some of the features that Web API provides that I like: Strong Support for URL Routing to produce clean URLs using familiar MVC style routing semantics Content Negotiation based on Accept headers for request and response serialization Support for a host of supported output formats including JSON, XML, ATOM Strong default support for REST semantics but they are optional Easily extensible Formatter support to add new input/output types Deep support for more advanced HTTP features via HttpResponseMessage and HttpRequestMessage classes and strongly typed Enums to describe many HTTP operations Convention based design that drives you into doing the right thing for HTTP Services Very extensible, based on MVC like extensibility model of Formatters and Filters Self-hostable in non-Web applications  Testable using testing concepts similar to MVC Web API is meant to handle any kind of HTTP input and produce output and status codes using the full spectrum of HTTP functionality available in a straight forward and flexible manner. Looking at the list above you can see that a lot of functionality is very similar to ASP.NET MVC, so many ASP.NET developers should feel quite comfortable with the concepts of Web API. The Routing and core infrastructure of Web API are very similar to how MVC works providing many of the benefits of MVC, but with focus on HTTP access and manipulation in Controller methods rather than HTML generation in MVC. There’s much improved support for content negotiation based on HTTP Accept headers with the framework capable of detecting automatically what content the client is sending and requesting and serving the appropriate data format in return. This seems like such a little and obvious thing, but it's really important. Today's service backends often are used by multiple clients/applications and being able to choose the right data format for what fits best for the client is very important. While previous solutions were able to accomplish this using a variety of mixed features of WCF and ASP.NET, Web API combines all this functionality into a single robust server side HTTP framework that intrinsically understands the HTTP semantics and subtly drives you in the right direction for most operations. And when you need to customize or do something that is not built in, there are lots of hooks and overrides for most behaviors, and even many low level hook points that allow you to plug in custom functionality with relatively little effort. No Brainers for Web API There are a few scenarios that are a slam dunk for Web API. If your primary focus of an application or even a part of an application is some sort of API then Web API makes great sense. HTTP ServicesIf you're building a comprehensive HTTP API that is to be consumed over the Web, Web API is a perfect fit. You can isolate the logic in Web API and build your application as a service breaking out the logic into controllers as needed. Because the primary interface is the service there's no confusion of what should go where (MVC or API). Perfect fit. Primary AJAX BackendsIf you're building rich client Web applications that are relying heavily on AJAX callbacks to serve its data, Web API is also a slam dunk. Again because much if not most of the business logic will probably end up in your Web API service logic, there's no confusion over where logic should go and there's no duplication. In Single Page Applications (SPA), typically there's very little HTML based logic served other than bringing up a shell UI and then filling the data from the server with AJAX which means the business logic required for data retrieval and data acceptance and validation too lives in the Web API. Perfect fit. Generic HTTP EndpointsAnother good fit are generic HTTP endpoints that to serve data or handle 'utility' type functionality in typical Web applications. If you need to implement an image server, or an upload handler in the past I'd implement that as an HTTP handler. With Web API you now have a well defined place where you can implement these types of generic 'services' in a location that can easily add endpoints (via Controller methods) or separated out as more full featured APIs. Granted this could be done with MVC as well, but Web API seems a clearer and more well defined place to store generic application services. This is one thing I used to do a lot of in my own libraries and Web API addresses this nicely. Great fit. Mixed HTML and AJAX Applications: Not a clear Choice  For all the commonality that Web API and MVC share they are fundamentally different platforms that are independent of each other. A lot of people have asked when does it make sense to use MVC vs. Web API when you're dealing with typical Web application that creates HTML and also uses AJAX functionality for rich functionality. While it's easy to say that all 'service'/AJAX logic should go into a Web API and all HTML related generation into MVC, that can often result in a lot of code duplication. Also MVC supports JSON and XML result data fairly easily as well so there's some confusion where that 'trigger point' is of when you should switch to Web API vs. just implementing functionality as part of MVC controllers. Ultimately there's a tradeoff between isolation of functionality and duplication. A good rule of thumb I think works is that if a large chunk of the application's functionality serves data Web API is a good choice, but if you have a couple of small AJAX requests to serve data to a grid or autocomplete box it'd be overkill to separate out that logic into a separate Web API controller. Web API does add overhead to your application (it's yet another framework that sits on top of core ASP.NET) so it should be worth it .Keep in mind that MVC can generate HTML and JSON/XML and just about any other content easily and that functionality is not going away, so just because you Web API is there it doesn't mean you have to use it. Web API is not a full replacement for MVC obviously either since there's not the same level of support to feed HTML from Web API controllers (although you can host a RazorEngine easily enough if you really want to go that route) so if you're HTML is part of your API or application in general MVC is still a better choice either alone or in combination with Web API. I suspect (and hope) that in the future Web API's functionality will merge even closer with MVC so that you might even be able to mix functionality of both into single Controllers so that you don't have to make any trade offs, but at the moment that's not the case. Some Issues To think about Web API is similar to MVC but not the Same Although Web API looks a lot like MVC it's not the same and some common functionality of MVC behaves differently in Web API. For example, the way single POST variables are handled is different than MVC and doesn't lend itself particularly well to some AJAX scenarios with POST data. Code Duplication I already touched on this in the Mixed HTML and Web API section, but if you build an MVC application that also exposes a Web API it's quite likely that you end up duplicating a bunch of code and - potentially - infrastructure. You may have to create authentication logic both for an HTML application and for the Web API which might need something different altogether. More often than not though the same logic is used, and there's no easy way to share. If you implement an MVC ActionFilter and you want that same functionality in your Web API you'll end up creating the filter twice. AJAX Data or AJAX HTML On a recent post's comments, David made some really good points regarding the commonality of MVC and Web API's and its place. One comment that caught my eye was a little more generic, regarding data services vs. HTML services. David says: I see a lot of merit in the combination of Knockout.js, client side templates and view models, calling Web API for a responsive UI, but sometimes late at night that still leaves me wondering why I would no longer be using some of the nice tooling and features that have evolved in MVC ;-) You know what - I can totally relate to that. On the last Web based mobile app I worked on, we decided to serve HTML partials to the client via AJAX for many (but not all!) things, rather than sending down raw data to inject into the DOM on the client via templating or direct manipulation. While there are definitely more bytes on the wire, with this, the overhead ended up being actually fairly small if you keep the 'data' requests small and atomic. Performance was often made up by the lack of client side rendering of HTML. Server rendered HTML for AJAX templating gives so much better infrastructure support without having to screw around with 20 mismatched client libraries. Especially with MVC and partials it's pretty easy to break out your HTML logic into very small, atomic chunks, so it's actually easy to create small rendering islands that can be used via composition on the server, or via AJAX calls to small, tight partials that return HTML to the client. Although this is often frowned upon as to 'heavy', it worked really well in terms of developer effort as well as providing surprisingly good performance on devices. There's still plenty of jQuery and AJAX logic happening on the client but it's more manageable in small doses rather than trying to do the entire UI composition with JavaScript and/or 'not-quite-there-yet' template engines that are very difficult to debug. This is not an issue directly related to Web API of course, but something to think about especially for AJAX or SPA style applications. Summary Web API is a great new addition to the ASP.NET platform and it addresses a serious need for consolidation of a lot of half-baked HTTP service API technologies that came before it. Web API feels 'right', and hits the right combination of usability and flexibility at least for me and it's a good fit for true API scenarios. However, just because a new platform is available it doesn't meant that other tools or tech that came before it should be discarded or even upgraded to the new platform. There's nothing wrong with continuing to use MVC controller methods to handle API tasks if that's what your app is running now - there's very little to be gained by upgrading to Web API just because. But going forward Web API clearly is the way to go, when building HTTP data interfaces and it's good to see that Microsoft got this one right - it was sorely needed! Resources ASP.NET Web API AspConf Ask the Experts Session (first 5 minutes) © Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Question about API and Web application code sharing

    - by opendd
    This is a design question. I have a multi part application with several user types. There is a user client for the patient that interacts with a web service. There is an API evolving behind the web service that will be exposed to institutional "users" and an interface for clinicians, researchers and admin types. The patient UI is Flex. The clinician/admin portion of the application is RoR. The API is RoR/rack based. The web service component is Java WS. All components access the same data source. These components are deployed as separate components to their own subdomains. This decision was made to allow for scaling the components individually as needed. Initially, the decision was made to split the code for the RoR Web application from the RoR API. This decision was made in the interests of security and keeping the components focused on specific tasks. Over the course of time, there is necessarily going to be overlap and I am second guessing my decision to keep the code totally separate. I am noticing code being lifted from the admin side being lifted, modified and used in the API. This being the case, I have been considering merging the Ruby based repositories. I am interested in ideas and insight on this situation along with the reasoning behind your thoughts. Thanks.

    Read the article

  • Free cloud web service development

    - by hyde
    I am looking for a free (as in beer) combination of services, for learning "cloud SW development" and very small scale private use (say, a private streamlined web shopping&todo list with simple auth). The combination should include the full set of needed services: DVCS service (like github) A cloud service to run the backend code A suitable data storage service (preferably not SQL), accessed by the backend (if not included in the backend service) A web service, serving the web pages seen by user, to access the backend functionality A "cloud IDE" (ideally one, two is ok too) for both backend and HTML/javascript coding If (backend) deployment uses some CI, then that Other points: Backend programming language can be anything, except VB or PHP Everything has to be in the cloud, nothing permanent on a local PC (graphics is not part of the question) Looking for ready-to-use service combination, not a virtual server where I can set anything up myself I don't care if service insists on displaying ads in the user web UI "Cheap" and "free trial" are ok too, if "free" does not exist As per example use case, storage, CPU and bandwidth quota requirements are negligible Google finds several services of course, all requiring at least registration before testing, so I'm looking for a known-good combination, so ideal answer starts with "I use this service combo: ...", contains links to services and brief description and personal experiences.

    Read the article

  • Java(standard, non standard) or Non Java based Web developement [closed]

    - by LivingThing
    I am new to web development. Initially i thought i would be learning LAMP or WAMP to acquire web developement skills but recently i came across Standard Java based (JSP, servlets) and Non standard Java based (GWT). My question is related to if and how LAMP can be compared with Java (standarad or non stadard) technologies. Is LAMP even comparable to Java based tech or it does something else or something more or less ? what requirement for a web developement projects require the choice that which of these 'technologies' should be choosen ? Thank YOu

    Read the article

  • Why is my RAID /dev/md1 showing up as /dev/md126? Is mdadm.conf being ignored?

    - by mmorris
    I created a RAID with: sudo mdadm --create --verbose /dev/md1 --level=mirror --raid-devices=2 /dev/sdb1 /dev/sdc1 sudo mdadm --create --verbose /dev/md2 --level=mirror --raid-devices=2 /dev/sdb2 /dev/sdc2 sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb Which I appended it to /etc/mdadm/mdadm.conf, see below: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default (built-in), scan all partitions (/proc/partitions) and all # containers for MD superblocks. alternatively, specify devices to scan, using # wildcards if desired. #DEVICE partitions containers # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays # This file was auto-generated on Mon, 29 Oct 2012 16:06:12 -0500 # by mkconf $Id$ ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:06 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:06 md2 So I think all is good and I reboot. After the reboot, /dev/md1 is now /dev/md126 and /dev/md2 is now /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:18 md brw-rw---- 1 root disk 9, 126 Oct 30 11:18 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:18 md127 All is not lost, I: sudo mdadm --stop /dev/md126 sudo mdadm --stop /dev/md127 sudo mdadm --assemble --verbose /dev/md1 /dev/sdb1 /dev/sdc1 sudo mdadm --assemble --verbose /dev/md2 /dev/sdb2 /dev/sdc2 and verify everything: sudo mdadm --detail --scan returns: ARRAY /dev/md1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sdb2[0] sdc2[1] 208629632 blocks super 1.2 [2/2] [UU] md1 : active raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: brw-rw---- 1 root disk 9, 1 Oct 30 11:26 md1 brw-rw---- 1 root disk 9, 2 Oct 30 11:26 md2 So once again, I think all is good and I reboot. Again, after the reboot, /dev/md1 is /dev/md126 and /dev/md2 is /dev/md127????? sudo mdadm --detail --scan returns: ARRAY /dev/md/ion:1 metadata=1.2 name=ion:1 UUID=aa1f85b0:a2391657:cfd38029:772c560e ARRAY /dev/md/ion:2 metadata=1.2 name=ion:2 UUID=528e5385:e61eaa4c:1db2dba7:44b556fb cat /proc/mdstat returns: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md126 : active raid1 sdc2[1] sdb2[0] 208629632 blocks super 1.2 [2/2] [UU] md127 : active (auto-read-only) raid1 sdb1[0] sdc1[1] 767868736 blocks super 1.2 [2/2] [UU] unused devices: <none> ls -la /dev | grep md returns: drwxr-xr-x 2 root root 80 Oct 30 11:42 md brw-rw---- 1 root disk 9, 126 Oct 30 11:42 md126 brw-rw---- 1 root disk 9, 127 Oct 30 11:42 md127 What am I missing here?

    Read the article

  • web application or web portal? [closed]

    - by klo
    as title said differences between those 2. I read all the definition and some articles, but I need information about some other aspects. Here is the thing. We want to build a web site that will contain: site, database, uploads, numerous background services that would have to collect information from uploads and from some other sites, parse them etc...I doubt that there are portlets that fits our specific need so we will have to make them our self. So, questions: 1. Deployment ( and difference in cost if possible), is deploying portals much more easier then web app ( java or .net) 2. Server load. Does portal consume much of server power ( and can you strip portal of thing that you do not use) 3. Implementation and developing of portlets. Can u make all the things that you could have done in java or .net? 4. General thoughts of when to use portals and when classic web app. Tnx all in advence...

    Read the article

  • LVM / Device Mapper maps wrong device

    - by DaDaDom
    Hi, I run a LVM setup on a raid1 created by mdadm. md2 is based on sda6 (major:minor 8:6) and sdb6 (8:22). md2 is partition 9:2. The VG on top of md2 has 4 LVs, var, home, usr, tmp. First the problem: While booting it seems as if the device mapper takes the wrong partition for the mapping! Immediately after boot the information is like ~# dmsetup table systemlvm-home: 0 4194304 linear 8:22 384 systemlvm-home: 4194304 16777216 linear 8:22 69206400 systemlvm-home: 20971520 8388608 linear 8:22 119538048 systemlvm-home: 29360128 6291456 linear 8:22 243270016 systemlvm-tmp: 0 2097152 linear 8:22 41943424 systemlvm-usr: 0 10485760 linear 8:22 20971904 systemlvm-var: 0 10485760 linear 8:22 10486144 systemlvm-var: 10485760 6291456 linear 8:22 4194688 systemlvm-var: 16777216 4194304 linear 8:22 44040576 systemlvm-var: 20971520 10485760 linear 8:22 31457664 systemlvm-var: 31457280 20971520 linear 8:22 48234880 systemlvm-var: 52428800 33554432 linear 8:22 85983616 systemlvm-var: 85983232 115343360 linear 8:22 127926656 ~# cat /proc/mdstat Personalities : [raid1] md2 : active (auto-read-only) raid1 sda6[0] 151798080 blocks [2/1] [U_] md0 : active raid1 sda1[0] sdb1[1] 96256 blocks [2/2] [UU] md1 : active raid1 sda2[0] sdb2[1] 2931776 blocks [2/2] [UU] I have to manually "lvchange -an" all LVs, add /dev/sdb6 back to the raid and reactivate the LVs, then all is fine. But it prevents me from automounting the partitions and obviously leads to a bunch of other problems. If everything works fine, the information is like ~$ cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb6[1] sda6[0] 151798080 blocks [2/2] [UU] ... ~# dmsetup table systemlvm-home: 0 4194304 linear 9:2 384 systemlvm-home: 4194304 16777216 linear 9:2 69206400 systemlvm-home: 20971520 8388608 linear 9:2 119538048 systemlvm-home: 29360128 6291456 linear 9:2 243270016 systemlvm-tmp: 0 2097152 linear 9:2 41943424 systemlvm-usr: 0 10485760 linear 9:2 20971904 systemlvm-var: 0 10485760 linear 9:2 10486144 systemlvm-var: 10485760 6291456 linear 9:2 4194688 systemlvm-var: 16777216 4194304 linear 9:2 44040576 systemlvm-var: 20971520 10485760 linear 9:2 31457664 systemlvm-var: 31457280 20971520 linear 9:2 48234880 systemlvm-var: 52428800 33554432 linear 9:2 85983616 systemlvm-var: 85983232 115343360 linear 9:2 127926656 I think that LVM for some reason just "takes" /dev/sdb6 which is then missing in the raid. I tried almost all options in the lvm.conf but none seems to work. Below is some more information, like config files. Does anyone have any idea about what is going on here and how to prevent that? If you need any additional information, please let me know Thanks in advance! Dominik The information (off a "repaired" system): ~# cat /etc/debian_version 5.0.4 ~# uname -a Linux kermit 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 GNU/Linux ~# lvm version LVM version: 2.02.39 (2008-06-27) Library version: 1.02.27 (2008-06-25) Driver version: 4.13.0 ~# cat /etc/mdadm/mdadm.conf DEVICE partitions ARRAY /dev/md1 level=raid1 num-devices=2 metadata=00.90 UUID=11e9dc6c:1da99f3f:b3088ca6:c6fe60e9 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=92ed1e4b:897361d3:070682b3:3baa4fa1 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=00.90 UUID=601d4642:39dc80d7:96e8bbac:649924ba ~# mount /dev/md1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md0 on /boot type ext3 (rw) /dev/mapper/systemlvm-usr on /usr type reiserfs (rw) /dev/mapper/systemlvm-tmp on /tmp type reiserfs (rw) /dev/mapper/systemlvm-home on /home type reiserfs (rw) /dev/mapper/systemlvm-var on /var type reiserfs (rw) ~# grep -v ^$ /etc/lvm/lvm.conf | grep -v "#" devices { dir = "/dev" scan = [ "/dev" ] preferred_names = [ ] filter = [ "a|/dev/md.*|", "r/.*/" ] cache_dir = "/etc/lvm/cache" cache_file_prefix = "" write_cache_state = 1 sysfs_scan = 1 md_component_detection = 1 ignore_suspended_devices = 0 } log { verbose = 0 syslog = 1 overwrite = 0 level = 0 indent = 1 command_names = 0 prefix = " " } backup { backup = 1 backup_dir = "/etc/lvm/backup" archive = 1 archive_dir = "/etc/lvm/archive" retain_min = 10 retain_days = 30 } shell { history_size = 100 } global { umask = 077 test = 0 units = "h" activation = 1 proc = "/proc" locking_type = 1 fallback_to_clustered_locking = 1 fallback_to_local_locking = 1 locking_dir = "/lib/init/rw" } activation { missing_stripe_filler = "/dev/ioerror" reserved_stack = 256 reserved_memory = 8192 process_priority = -18 mirror_region_size = 512 readahead = "auto" mirror_log_fault_policy = "allocate" mirror_device_fault_policy = "remove" } :~# vgscan -vvv Processing: vgscan -vvv O_DIRECT will be used Setting global/locking_type to 1 File-based locking selected. Setting global/locking_dir to /lib/init/rw Locking /lib/init/rw/P_global WB Wiping cache of LVM-capable devices /dev/block/1:0: Added to device cache /dev/block/1:1: Added to device cache /dev/block/1:10: Added to device cache /dev/block/1:11: Added to device cache /dev/block/1:12: Added to device cache /dev/block/1:13: Added to device cache /dev/block/1:14: Added to device cache /dev/block/1:15: Added to device cache /dev/block/1:2: Added to device cache /dev/block/1:3: Added to device cache /dev/block/1:4: Added to device cache /dev/block/1:5: Added to device cache /dev/block/1:6: Added to device cache /dev/block/1:7: Added to device cache /dev/block/1:8: Added to device cache /dev/block/1:9: Added to device cache /dev/block/253:0: Added to device cache /dev/block/253:1: Added to device cache /dev/block/253:2: Added to device cache /dev/block/253:3: Added to device cache /dev/block/8:0: Added to device cache /dev/block/8:1: Added to device cache /dev/block/8:16: Added to device cache /dev/block/8:17: Added to device cache /dev/block/8:18: Added to device cache /dev/block/8:19: Added to device cache /dev/block/8:2: Added to device cache /dev/block/8:21: Added to device cache /dev/block/8:22: Added to device cache /dev/block/8:3: Added to device cache /dev/block/8:5: Added to device cache /dev/block/8:6: Added to device cache /dev/block/9:0: Already in device cache /dev/block/9:1: Already in device cache /dev/block/9:2: Already in device cache /dev/bsg/0:0:0:0: Not a block device /dev/bsg/1:0:0:0: Not a block device /dev/bus/usb/001/001: Not a block device [... many more "not a block device"] /dev/core: Not a block device /dev/cpu_dma_latency: Not a block device /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-id/dm-name-systemlvm-home: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/dm-name-systemlvm-tmp: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-name-systemlvm-usr: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-name-systemlvm-var: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr25N7CRZpUMzR18NfS6zeSeAVnVT98LuU: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr3TpFXtLjYGEwn79IdXsSCZPl8AxmqbmQ: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrc5MJ4KolevMjt85PPBrQuRTkXbx6NvTi: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrYXrfdg5OSYDVkNeiQeQksgCI849Z2hx8: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/md-uuid-11e9dc6c:1da99f3f:b3088ca6:c6fe60e9: Already in device cache /dev/disk/by-id/md-uuid-601d4642:39dc80d7:96e8bbac:649924ba: Already in device cache /dev/disk/by-id/md-uuid-92ed1e4b:897361d3:070682b3:3baa4fa1: Already in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0: Aliased to /dev/block/8:0 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0: Aliased to /dev/block/8:16 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-uuid/13c1262b-e06f-40ce-b088-ce410640a6dc: Aliased to /dev/block/253:3 in device cache /dev/disk/by-uuid/379f57b0-2e03-414c-808a-f76160617336: Aliased to /dev/block/253:2 in device cache /dev/disk/by-uuid/4fb2d6d3-bd51-48d3-95ee-8e404faf243d: Already in device cache /dev/disk/by-uuid/5c6728ec-82c1-49c0-93c5-f6dbd5c0d659: Aliased to /dev/block/8:5 in device cache /dev/disk/by-uuid/a13cdfcd-2191-4185-a727-ffefaf7a382e: Aliased to /dev/block/253:1 in device cache /dev/disk/by-uuid/e0d5893d-ff88-412f-b753-9e3e9af3242d: Aliased to /dev/block/8:21 in device cache /dev/disk/by-uuid/e79c9da6-8533-4e55-93ec-208876671edc: Aliased to /dev/block/253:0 in device cache /dev/disk/by-uuid/f3f176f5-12f7-4af8-952a-c6ac43a6e332: Already in device cache /dev/dm-0: Aliased to /dev/block/253:0 in device cache (preferred name) /dev/dm-1: Aliased to /dev/block/253:1 in device cache (preferred name) /dev/dm-2: Aliased to /dev/block/253:2 in device cache (preferred name) /dev/dm-3: Aliased to /dev/block/253:3 in device cache (preferred name) /dev/fd: Symbolic link to directory /dev/full: Not a block device /dev/hpet: Not a block device /dev/initctl: Not a block device /dev/input/by-path/platform-i8042-serio-0-event-kbd: Not a block device /dev/input/event0: Not a block device /dev/input/mice: Not a block device /dev/kmem: Not a block device /dev/kmsg: Not a block device /dev/log: Not a block device /dev/loop/0: Added to device cache /dev/MAKEDEV: Not a block device /dev/mapper/control: Not a block device /dev/mapper/systemlvm-home: Aliased to /dev/dm-2 in device cache /dev/mapper/systemlvm-tmp: Aliased to /dev/dm-3 in device cache /dev/mapper/systemlvm-usr: Aliased to /dev/dm-1 in device cache /dev/mapper/systemlvm-var: Aliased to /dev/dm-0 in device cache /dev/md0: Already in device cache /dev/md1: Already in device cache /dev/md2: Already in device cache /dev/mem: Not a block device /dev/net/tun: Not a block device /dev/network_latency: Not a block device /dev/network_throughput: Not a block device /dev/null: Not a block device /dev/port: Not a block device /dev/ppp: Not a block device /dev/psaux: Not a block device /dev/ptmx: Not a block device /dev/pts/0: Not a block device /dev/ram0: Aliased to /dev/block/1:0 in device cache (preferred name) /dev/ram1: Aliased to /dev/block/1:1 in device cache (preferred name) /dev/ram10: Aliased to /dev/block/1:10 in device cache (preferred name) /dev/ram11: Aliased to /dev/block/1:11 in device cache (preferred name) /dev/ram12: Aliased to /dev/block/1:12 in device cache (preferred name) /dev/ram13: Aliased to /dev/block/1:13 in device cache (preferred name) /dev/ram14: Aliased to /dev/block/1:14 in device cache (preferred name) /dev/ram15: Aliased to /dev/block/1:15 in device cache (preferred name) /dev/ram2: Aliased to /dev/block/1:2 in device cache (preferred name) /dev/ram3: Aliased to /dev/block/1:3 in device cache (preferred name) /dev/ram4: Aliased to /dev/block/1:4 in device cache (preferred name) /dev/ram5: Aliased to /dev/block/1:5 in device cache (preferred name) /dev/ram6: Aliased to /dev/block/1:6 in device cache (preferred name) /dev/ram7: Aliased to /dev/block/1:7 in device cache (preferred name) /dev/ram8: Aliased to /dev/block/1:8 in device cache (preferred name) /dev/ram9: Aliased to /dev/block/1:9 in device cache (preferred name) /dev/random: Not a block device /dev/root: Already in device cache /dev/rtc: Not a block device /dev/rtc0: Not a block device /dev/sda: Aliased to /dev/block/8:0 in device cache (preferred name) /dev/sda1: Aliased to /dev/block/8:1 in device cache (preferred name) /dev/sda2: Aliased to /dev/block/8:2 in device cache (preferred name) /dev/sda3: Aliased to /dev/block/8:3 in device cache (preferred name) /dev/sda5: Aliased to /dev/block/8:5 in device cache (preferred name) /dev/sda6: Aliased to /dev/block/8:6 in device cache (preferred name) /dev/sdb: Aliased to /dev/block/8:16 in device cache (preferred name) /dev/sdb1: Aliased to /dev/block/8:17 in device cache (preferred name) /dev/sdb2: Aliased to /dev/block/8:18 in device cache (preferred name) /dev/sdb3: Aliased to /dev/block/8:19 in device cache (preferred name) /dev/sdb5: Aliased to /dev/block/8:21 in device cache (preferred name) /dev/sdb6: Aliased to /dev/block/8:22 in device cache (preferred name) /dev/shm/network/ifstate: Not a block device /dev/snapshot: Not a block device /dev/sndstat: stat failed: Datei oder Verzeichnis nicht gefunden /dev/stderr: Not a block device /dev/stdin: Not a block device /dev/stdout: Not a block device /dev/systemlvm/home: Aliased to /dev/dm-2 in device cache /dev/systemlvm/tmp: Aliased to /dev/dm-3 in device cache /dev/systemlvm/usr: Aliased to /dev/dm-1 in device cache /dev/systemlvm/var: Aliased to /dev/dm-0 in device cache /dev/tty: Not a block device /dev/tty0: Not a block device [... many more "not a block device"] /dev/vcsa6: Not a block device /dev/xconsole: Not a block device /dev/zero: Not a block device Wiping internal VG cache lvmcache: initialised VG #orphans_lvm1 lvmcache: initialised VG #orphans_pool lvmcache: initialised VG #orphans_lvm2 Reading all physical volumes. This may take a while... Finding all volume groups /dev/ram0: Skipping (regex) /dev/loop/0: Skipping (sysfs) /dev/sda: Skipping (regex) Opened /dev/md0 RO /dev/md0: size is 192512 sectors Closed /dev/md0 /dev/md0: size is 192512 sectors Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes Closed /dev/md0 Using /dev/md0 Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes /dev/md0: No label detected Closed /dev/md0 /dev/dm-0: Skipping (regex) /dev/ram1: Skipping (regex) /dev/sda1: Skipping (regex) Opened /dev/md1 RO /dev/md1: size is 5863552 sectors Closed /dev/md1 /dev/md1: size is 5863552 sectors Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes Closed /dev/md1 Using /dev/md1 Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes /dev/md1: No label detected Closed /dev/md1 /dev/dm-1: Skipping (regex) /dev/ram2: Skipping (regex) /dev/sda2: Skipping (regex) Opened /dev/md2 RO /dev/md2: size is 303596160 sectors Closed /dev/md2 /dev/md2: size is 303596160 sectors Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes Closed /dev/md2 Using /dev/md2 Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Closed /dev/md2 /dev/dm-2: Skipping (regex) /dev/ram3: Skipping (regex) /dev/sda3: Skipping (regex) /dev/dm-3: Skipping (regex) /dev/ram4: Skipping (regex) /dev/ram5: Skipping (regex) /dev/sda5: Skipping (regex) /dev/ram6: Skipping (regex) /dev/sda6: Skipping (regex) /dev/ram7: Skipping (regex) /dev/ram8: Skipping (regex) /dev/ram9: Skipping (regex) /dev/ram10: Skipping (regex) /dev/ram11: Skipping (regex) /dev/ram12: Skipping (regex) /dev/ram13: Skipping (regex) /dev/ram14: Skipping (regex) /dev/ram15: Skipping (regex) /dev/sdb: Skipping (regex) /dev/sdb1: Skipping (regex) /dev/sdb2: Skipping (regex) /dev/sdb3: Skipping (regex) /dev/sdb5: Skipping (regex) /dev/sdb6: Skipping (regex) Locking /lib/init/rw/V_systemlvm RB Finding volume group "systemlvm" Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) with 1 mdas /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Using cached label for /dev/md2 Read systemlvm metadata (19) from /dev/md2 at 39936 size 2632 /dev/md2 0: 0 16: home(0:0) /dev/md2 1: 16 24: var(40:0) /dev/md2 2: 40 40: var(0:0) /dev/md2 3: 80 40: usr(0:0) /dev/md2 4: 120 40: var(80:0) /dev/md2 5: 160 8: tmp(0:0) /dev/md2 6: 168 16: var(64:0) /dev/md2 7: 184 80: var(120:0) /dev/md2 8: 264 64: home(16:0) /dev/md2 9: 328 128: var(200:0) /dev/md2 10: 456 32: home(80:0) /dev/md2 11: 488 440: var(328:0) /dev/md2 12: 928 24: home(112:0) /dev/md2 13: 952 206: NULL(0:0) Found volume group "systemlvm" using metadata type lvm2 Read volume group systemlvm from /etc/lvm/backup/systemlvm Unlocking /lib/init/rw/V_systemlvm Closed /dev/md2 Unlocking /lib/init/rw/P_global ~# vgdisplay --- Volume group --- VG Name systemlvm System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 19 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 4 Max PV 0 Cur PV 1 Act PV 1 VG Size 144,75 GB PE Size 128,00 MB Total PE 1158 Alloc PE / Size 952 / 119,00 GB Free PE / Size 206 / 25,75 GB VG UUID rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr ~# pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name systemlvm PV Size 144,77 GB / not usable 16,31 MB Allocatable yes PE Size (KByte) 131072 Total PE 1158 Free PE 206 Allocated PE 952 PV UUID ZSAzP5-iBvr-L7jy-wB8T-AiWz-0g3m-HLK66Y :~# lvdisplay --- Logical volume --- LV Name /dev/systemlvm/home VG Name systemlvm LV UUID YXrfdg-5OSY-DVkN-eiQe-Qksg-CI84-9Z2hx8 LV Write Access read/write LV Status available # open 2 LV Size 17,00 GB Current LE 136 Segments 4 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/systemlvm/var VG Name systemlvm LV UUID 25N7CR-ZpUM-zR18-NfS6-zeSe-AVnV-T98LuU LV Write Access read/write LV Status available # open 2 LV Size 96,00 GB Current LE 768 Segments 7 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/systemlvm/usr VG Name systemlvm LV UUID 3TpFXt-LjYG-Ewn7-9IdX-sSCZ-Pl8A-xmqbmQ LV Write Access read/write LV Status available # open 2 LV Size 5,00 GB Current LE 40 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/systemlvm/tmp VG Name systemlvm LV UUID c5MJ4K-olev-Mjt8-5PPB-rQuR-TkXb-x6NvTi LV Write Access read/write LV Status available # open 2 LV Size 1,00 GB Current LE 8 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3

    Read the article

  • Where is /dev/dsp or /dev/audio?

    - by YumYumYum
    I have to apply sudo chmod a+r /dev/dsp or /dev/audio but in my Ubuntu 12.10 i do not have such. Where is then the PCM sound file for ssh? chmod: cannot access `/dev/dsp': No such file or directory chmod: cannot access `/dev/audio': No such file or directory Follow up: http://superuser.com/questions/244173/missing-dev-dsp-under-ubuntu I want to stream the sound output and input. So that i can capture any audio in/out to a file for recording.

    Read the article

  • How to add more /dev/loop* devices on Fedora 19

    - by user219372
    How to add more /dev/loop* devices on Fedora 19? I do: # uname -r 3.11.2-201.fc19.x86_64 # lsmod |grep loop # ls /dev/loop* /dev/loop0 /dev/loop1 /dev/loop2 /dev/loop3 /dev/loop4 /dev/loop5 /dev/loop6 /dev/loop7 /dev/loop-control # modprobe loop max_loop=128 # ls /dev/loop* /dev/loop0 /dev/loop1 /dev/loop2 /dev/loop3 /dev/loop4 /dev/loop5 /dev/loop6 /dev/loop7 /dev/loop-control So nothing changes.

    Read the article

  • Need help with PHP web app bootstrapping error potentially related to Zend [migrated]

    - by Matt Shepherd
    I am trying to get a program called OpenFISMA running on an Ubuntu AMI in AWS. The app is not really coded on the Ubuntu platform, but I am in my comfort zone there, and have tried both CentOS and OpenSUSE (both are sort of "native" for the app) for getting it working with the same or worse results. So, why not just get it working on Ubuntu? Anyway, the app is found here: www.openfisma.org and an install guide is found here: https://openfisma.atlassian.net/wiki/display/030100/Installation+Guide The install guide kind of sucks. It doesn't list dependencies in any coherent way or provide much of any detail (does not even mention Zend once on the entire page) so I've done a lot of work to divine the information I do have. This page provided some dependency inf (though again, Zend is not mentioned once): https://openfisma.atlassian.net/wiki/display/PUBLIC/RPM+Management#RPMManagement-BasicOverviewofRPMPackages Anyway, I got all the way through the install (so far as I could reconstruct it). I am going to the login page for the first time, and there should be some sort of bootstrapping occurring when I load the page. (I am not a programmer so I have no idea what it is doing there.) Anyway, I get a message on the web page that says: "An exception occurred while bootstrapping the application." So, then I go look in /var/www/data/logs/php.log and find this message: [22-Oct-2013 17:29:18 UTC] PHP Fatal error: Uncaught exception 'Zend_Exception' with message 'No entry is registered for key 'Zend_Log'' in /var/www/library/Zend/Registry.php:147 Stack trace: #0 /var/www/public/index.php(188): Zend_Registry::get('Zend_Log') #1 {main} thrown in /var/www/library/Zend/Registry.php on line 147 This occurs every time I load the page. I gather there is an issue related to registering the Zend_Log variable in the Zend registry, but other than that I really have no idea what to do about it. Am I missing a package that it needs, or is this app not coded to register the variables properly? I have no clue. Any help is greatly appreciated. The application file referenced in the log message (index.php) is included below. <?php /** * Copyright (c) 2008 Endeavor Systems, Inc. * * This file is part of OpenFISMA. * * OpenFISMA is free software: you can redistribute it and/or modify it under the terms of the GNU General Public * License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later * version. * * OpenFISMA is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more * details. * * You should have received a copy of the GNU General Public License along with OpenFISMA. If not, see * {@link http://www.gnu.org/licenses/}. */ try { defined('APPLICATION_PATH') || define( 'APPLICATION_PATH', realpath(dirname(__FILE__) . '/../application') ); // Define application environment defined('APPLICATION_ENV') || define( 'APPLICATION_ENV', (getenv('APPLICATION_ENV') ? getenv('APPLICATION_ENV') : 'production') ); set_include_path( APPLICATION_PATH . '/../library/Symfony/Components' . PATH_SEPARATOR . APPLICATION_PATH . '/../library' . PATH_SEPARATOR . get_include_path() ); require_once 'Fisma.php'; require_once 'Zend/Application.php'; $application = new Zend_Application( APPLICATION_ENV, APPLICATION_PATH . '/config/application.ini' ); Fisma::setAppConfig($application->getOptions()); Fisma::initialize(Fisma::RUN_MODE_WEB_APP); $application->bootstrap()->run(); } catch (Zend_Config_Exception $zce) { // A zend config exception indicates that the application may not be installed properly echo '<h1>The application is not installed correctly</h1>'; $zceMsg = $zce->getMessage(); if (stristr($zceMsg, 'parse_ini_file') !== false) { if (stristr($zceMsg, 'application.ini') !== false) { if (stristr($zceMsg, 'No such file or directory') !== false) { echo 'The ' . APPLICATION_PATH . '/config/application.ini file is missing.'; } elseif (stristr($zceMsg, 'Permission denied') !== false) { echo 'The ' . APPLICATION_PATH . '/config/application.ini file does not have the ' . 'appropriate permissions set for the application to read it.'; } else { echo 'An ini-parsing error has occured in ' . APPLICATION_PATH . '/config/application.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } } else if (stristr($zceMsg, 'database.ini') !== false) { if (stristr($zceMsg, 'No such file or directory') !== false) { echo 'The ' . APPLICATION_PATH . '/config/database.ini file is missing.<br/>'; echo 'If you find a database.ini.template file in the config directory, edit this file ' . 'appropriately and rename it to database.ini'; } elseif (stristr($zceMsg, 'Permission denied') !== false) { echo 'The ' . APPLICATION_PATH . '/config/database.ini file does not have the appropriate ' . 'permissions set for the application to read it.'; } else { echo 'An ini-parsing error has occured in ' . APPLICATION_PATH . '/config/database.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } } else { echo 'An ini-parsing error has occured. <br/>Please check all configuration files and make sure ' . 'everything is setup correctly'; } } elseif (stristr($zceMsg, 'syntax error') !== false) { if (stristr($zceMsg, 'application.ini') !== false) { echo 'There is a syntax error in ' . APPLICATION_PATH . '/config/application.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } elseif (stristr($zceMsg, 'database.ini') !== false) { echo 'There is a syntax error in ' . APPLICATION_PATH . '/config/database.ini ' . '<br/>Please check this file and make sure everything is setup correctly.'; } else { echo 'A syntax error has been reached. <br/>Please check all configuration files and make sure ' . 'everything is setup correctly.'; } } else { // Then the exception message says nothing about parse_ini_file nor 'syntax error' echo 'Please check all configuration files, and ensure all settings are valid.'; } echo '<br/>For more information and help on installing OpenFISMA, please refer to the ' . '<a target="_blank" href="http://manual.openfisma.org/display/ADMIN/Installation">' . 'Installation Guide</a>'; } catch (Doctrine_Manager_Exception $dme) { echo '<h1>An exception occurred while bootstrapping the application.</h1>'; // Does database.ini have valid settings? Or is it the same content as database.ini.template? $databaseIniFail = false; $iniData = file(APPLICATION_PATH . '/config/database.ini'); $iniData = str_replace(chr(10), '', $iniData); if (in_array('db.adapter = ##DB_ADAPTER##', $iniData)) { $databaseIniFail = true; } if (in_array('db.host = ##DB_HOST##', $iniData)) { $databaseIniFail = true; } if (in_array('db.port = ##DB_PORT##', $iniData)) { $databaseIniFail = true; } if (in_array('db.username = ##DB_USER##', $iniData)) { $databaseIniFail = true; } if (in_array('db.password = ##DB_PASS##', $iniData)) { $databaseIniFail = true; } if (in_array('db.schema = ##DB_NAME##', $iniData)) { $databaseIniFail = true; } if ($databaseIniFail) { echo 'You have not applied the settings in ' . APPLICATION_PATH . '/config/database.ini appropriately. ' . 'Please review the contents of this file and try again.'; } else { if (Fisma::debug()) { echo '<p>' . get_class($dme) . '</p><p>' . $dme->getMessage() . '</p><p>' . "<p><pre>Stack Trace:\n" . $dme->getTraceAsString() . '</pre></p>'; } else { $logString = get_class($dme) . "\n" . $dme->getMessage() . "\nStack Trace:\n" . $dme->getTraceAsString() . "\n"; Zend_Registry::get('Zend_Log')->err($logString); } } } catch (Exception $exception) { // If a bootstrap exception occurs, that indicates a serious problem, such as a syntax error. // We won't be able to do anything except display an error. echo '<h1>An exception occurred while bootstrapping the application.</h1>'; if (Fisma::debug()) { echo '<p>' . get_class($exception) . '</p><p>' . $exception->getMessage() . '</p><p>' . "<p><pre>Stack Trace:\n" . $exception->getTraceAsString() . '</pre></p>'; } else { $logString = get_class($exception) . "\n" . $exception->getMessage() . "\nStack Trace:\n" . $exception->getTraceAsString() . "\n"; Zend_Registry::get('Zend_Log')->err($logString); } }

    Read the article

  • Cannot open TUN/TAP dev /dev/as0t0: No such file or directory (errno=2)

    - by Mark
    I just attempted to install OpenVPN Access Server on my Debian VPS that uses OpenVZ. It installed fine, however when I try to start it from the administration panel, I get these errors: process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t0: No such file or directory (errno=2)'] service failed to start or returned error status process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t1: No such file or directory (errno=2)'] service failed to start or returned error status process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t2: No such file or directory (errno=2)'] service failed to start or returned error status process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t3: No such file or directory (errno=2)'] service failed to start or returned error status process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t4: No such file or directory (errno=2)'] service failed to start or returned error status process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t5: No such file or directory (errno=2)'] service failed to start or returned error status process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t6: No such file or directory (errno=2)'] service failed to start or returned error status process started and then immediately exited: ['Sat Sep 22 19:14:33 2012 Cannot open TUN/TAP dev /dev/as0t7: No such file or directory (errno=2)'] service failed to start or returned error status Is there a solution for this?

    Read the article

  • fdisk -l shows a partition is not in /dev directory

    - by zitronic
    I am having troubles on mounting my ntfs hard drive on linux. I am running ophcrack live CD. fdisk shows me the hard drive I have installed on my computer fdisk -l Disk /dev/hdc: 30.0 GB, 30005821440 bytes 255 heads, 63 sectors/track, 3648 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 3647 29294496 7 HPFS/NTFS but I dont have that device on my /dev directory so I can not mount it ls /dev/hd* /dev/hda /dev/hda4 /dev/hda8 /dev/hdb2 /dev/hdb6 /dev/hdc /dev/hda1 /dev/hda5 /dev/hda9 /dev/hdb3 /dev/hdb7 /dev/hdd /dev/hda2 /dev/hda6 /dev/hdb /dev/hdb4 /dev/hdb8 /dev/hda3 /dev/hda7 /dev/hdb1 /dev/hdb5 /dev/hdb9 What could be going on_

    Read the article

  • An Introduction to ASP.NET Web API

    - by Rick Strahl
    Microsoft recently released ASP.NET MVC 4.0 and .NET 4.5 and along with it, the brand spanking new ASP.NET Web API. Web API is an exciting new addition to the ASP.NET stack that provides a new, well-designed HTTP framework for creating REST and AJAX APIs (API is Microsoft’s new jargon for a service, in case you’re wondering). Although Web API ships and installs with ASP.NET MVC 4, you can use Web API functionality in any ASP.NET project, including WebForms, WebPages and MVC or just a Web API by itself. And you can also self-host Web API in your own applications from Console, Desktop or Service applications. If you're interested in a high level overview on what ASP.NET Web API is and how it fits into the ASP.NET stack you can check out my previous post: Where does ASP.NET Web API fit? In the following article, I'll focus on a practical, by example introduction to ASP.NET Web API. All the code discussed in this article is available in GitHub: https://github.com/RickStrahl/AspNetWebApiArticle [republished from my Code Magazine Article and updated for RTM release of ASP.NET Web API] Getting Started To start I’ll create a new empty ASP.NET application to demonstrate that Web API can work with any kind of ASP.NET project. Although you can create a new project based on the ASP.NET MVC/Web API template to quickly get up and running, I’ll take you through the manual setup process, because one common use case is to add Web API functionality to an existing ASP.NET application. This process describes the steps needed to hook up Web API to any ASP.NET 4.0 application. Start by creating an ASP.NET Empty Project. Then create a new folder in the project called Controllers. Add a Web API Controller Class Once you have any kind of ASP.NET project open, you can add a Web API Controller class to it. Web API Controllers are very similar to MVC Controller classes, but they work in any kind of project. Add a new item to this folder by using the Add New Item option in Visual Studio and choose Web API Controller Class, as shown in Figure 1. Figure 1: This is how you create a new Controller Class in Visual Studio   Make sure that the name of the controller class includes Controller at the end of it, which is required in order for Web API routing to find it. Here, the name for the class is AlbumApiController. For this example, I’ll use a Music Album model to demonstrate basic behavior of Web API. The model consists of albums and related songs where an album has properties like Name, Artist and YearReleased and a list of songs with a SongName and SongLength as well as an AlbumId that links it to the album. You can find the code for the model (and the rest of these samples) on Github. To add the file manually, create a new folder called Model, and add a new class Album.cs and copy the code into it. There’s a static AlbumData class with a static CreateSampleAlbumData() method that creates a short list of albums on a static .Current that I’ll use for the examples. Before we look at what goes into the controller class though, let’s hook up routing so we can access this new controller. Hooking up Routing in Global.asax To start, I need to perform the one required configuration task in order for Web API to work: I need to configure routing to the controller. Like MVC, Web API uses routing to provide clean, extension-less URLs to controller methods. Using an extension method to ASP.NET’s static RouteTable class, you can use the MapHttpRoute() (in the System.Web.Http namespace) method to hook-up the routing during Application_Start in global.asax.cs shown in Listing 1.using System; using System.Web.Routing; using System.Web.Http; namespace AspNetWebApi { public class Global : System.Web.HttpApplication { protected void Application_Start(object sender, EventArgs e) { RouteTable.Routes.MapHttpRoute( name: "AlbumVerbs", routeTemplate: "albums/{title}", defaults: new { symbol = RouteParameter.Optional, controller="AlbumApi" } ); } } } This route configures Web API to direct URLs that start with an albums folder to the AlbumApiController class. Routing in ASP.NET is used to create extensionless URLs and allows you to map segments of the URL to specific Route Value parameters. A route parameter, with a name inside curly brackets like {name}, is mapped to parameters on the controller methods. Route parameters can be optional, and there are two special route parameters – controller and action – that determine the controller to call and the method to activate respectively. HTTP Verb Routing Routing in Web API can route requests by HTTP Verb in addition to standard {controller},{action} routing. For the first examples, I use HTTP Verb routing, as shown Listing 1. Notice that the route I’ve defined does not include an {action} route value or action value in the defaults. Rather, Web API can use the HTTP Verb in this route to determine the method to call the controller, and a GET request maps to any method that starts with Get. So methods called Get() or GetAlbums() are matched by a GET request and a POST request maps to a Post() or PostAlbum(). Web API matches a method by name and parameter signature to match a route, query string or POST values. In lieu of the method name, the [HttpGet,HttpPost,HttpPut,HttpDelete, etc] attributes can also be used to designate the accepted verbs explicitly if you don’t want to follow the verb naming conventions. Although HTTP Verb routing is a good practice for REST style resource APIs, it’s not required and you can still use more traditional routes with an explicit {action} route parameter. When {action} is supplied, the HTTP verb routing is ignored. I’ll talk more about alternate routes later. When you’re finished with initial creation of files, your project should look like Figure 2.   Figure 2: The initial project has the new API Controller Album model   Creating a small Album Model Now it’s time to create some controller methods to serve data. For these examples, I’ll use a very simple Album and Songs model to play with, as shown in Listing 2. public class Song { public string AlbumId { get; set; } [Required, StringLength(80)] public string SongName { get; set; } [StringLength(5)] public string SongLength { get; set; } } public class Album { public string Id { get; set; } [Required, StringLength(80)] public string AlbumName { get; set; } [StringLength(80)] public string Artist { get; set; } public int YearReleased { get; set; } public DateTime Entered { get; set; } [StringLength(150)] public string AlbumImageUrl { get; set; } [StringLength(200)] public string AmazonUrl { get; set; } public virtual List<Song> Songs { get; set; } public Album() { Songs = new List<Song>(); Entered = DateTime.Now; // Poor man's unique Id off GUID hash Id = Guid.NewGuid().GetHashCode().ToString("x"); } public void AddSong(string songName, string songLength = null) { this.Songs.Add(new Song() { AlbumId = this.Id, SongName = songName, SongLength = songLength }); } } Once the model has been created, I also added an AlbumData class that generates some static data in memory that is loaded onto a static .Current member. The signature of this class looks like this and that's what I'll access to retrieve the base data:public static class AlbumData { // sample data - static list public static List<Album> Current = CreateSampleAlbumData(); /// <summary> /// Create some sample data /// </summary> /// <returns></returns> public static List<Album> CreateSampleAlbumData() { … }} You can check out the full code for the data generation online. Creating an AlbumApiController Web API shares many concepts of ASP.NET MVC, and the implementation of your API logic is done by implementing a subclass of the System.Web.Http.ApiController class. Each public method in the implemented controller is a potential endpoint for the HTTP API, as long as a matching route can be found to invoke it. The class name you create should end in Controller, which is how Web API matches the controller route value to figure out which class to invoke. Inside the controller you can implement methods that take standard .NET input parameters and return .NET values as results. Web API’s binding tries to match POST data, route values, form values or query string values to your parameters. Because the controller is configured for HTTP Verb based routing (no {action} parameter in the route), any methods that start with Getxxxx() are called by an HTTP GET operation. You can have multiple methods that match each HTTP Verb as long as the parameter signatures are different and can be matched by Web API. In Listing 3, I create an AlbumApiController with two methods to retrieve a list of albums and a single album by its title .public class AlbumApiController : ApiController { public IEnumerable<Album> GetAlbums() { var albums = AlbumData.Current.OrderBy(alb => alb.Artist); return albums; } public Album GetAlbum(string title) { var album = AlbumData.Current .SingleOrDefault(alb => alb.AlbumName.Contains(title)); return album; }} To access the first two requests, you can use the following URLs in your browser: http://localhost/aspnetWebApi/albumshttp://localhost/aspnetWebApi/albums/Dirty%20Deeds Note that you’re not specifying the actions of GetAlbum or GetAlbums in these URLs. Instead Web API’s routing uses HTTP GET verb to route to these methods that start with Getxxx() with the first mapping to the parameterless GetAlbums() method and the latter to the GetAlbum(title) method that receives the title parameter mapped as optional in the route. Content Negotiation When you access any of the URLs above from a browser, you get either an XML or JSON result returned back. The album list result for Chrome 17 and Internet Explorer 9 is shown Figure 3. Figure 3: Web API responses can vary depending on the browser used, demonstrating Content Negotiation in action as these two browsers send different HTTP Accept headers.   Notice that the results are not the same: Chrome returns an XML response and IE9 returns a JSON response. Whoa, what’s going on here? Shouldn’t we see the same result in both browsers? Actually, no. Web API determines what type of content to return based on Accept headers. HTTP clients, like browsers, use Accept headers to specify what kind of content they’d like to see returned. Browsers generally ask for HTML first, followed by a few additional content types. Chrome (and most other major browsers) ask for: Accept: text/html, application/xhtml+xml,application/xml; q=0.9,*/*;q=0.8 IE9 asks for: Accept: text/html, application/xhtml+xml, */* Note that Chrome’s Accept header includes application/xml, which Web API finds in its list of supported media types and returns an XML response. IE9 does not include an Accept header type that works on Web API by default, and so it returns the default format, which is JSON. This is an important and very useful feature that was missing from any previous Microsoft REST tools: Web API automatically switches output formats based on HTTP Accept headers. Nowhere in the server code above do you have to explicitly specify the output format. Rather, Web API determines what format the client is requesting based on the Accept headers and automatically returns the result based on the available formatters. This means that a single method can handle both XML and JSON results.. Using this simple approach makes it very easy to create a single controller method that can return JSON, XML, ATOM or even OData feeds by providing the appropriate Accept header from the client. By default you don’t have to worry about the output format in your code. Note that you can still specify an explicit output format if you choose, either globally by overriding the installed formatters, or individually by returning a lower level HttpResponseMessage instance and setting the formatter explicitly. More on that in a minute. Along the same lines, any content sent to the server via POST/PUT is parsed by Web API based on the HTTP Content-type of the data sent. The same formats allowed for output are also allowed on input. Again, you don’t have to do anything in your code – Web API automatically performs the deserialization from the content. Accessing Web API JSON Data with jQuery A very common scenario for Web API endpoints is to retrieve data for AJAX calls from the Web browser. Because JSON is the default format for Web API, it’s easy to access data from the server using jQuery and its getJSON() method. This example receives the albums array from GetAlbums() and databinds it into the page using knockout.js.$.getJSON("albums/", function (albums) { // make knockout template visible $(".album").show(); // create view object and attach array var view = { albums: albums }; ko.applyBindings(view); }); Figure 4 shows this and the next example’s HTML output. You can check out the complete HTML and script code at http://goo.gl/Ix33C (.html) and http://goo.gl/tETlg (.js). Figu Figure 4: The Album Display sample uses JSON data loaded from Web API.   The result from the getJSON() call is a JavaScript object of the server result, which comes back as a JavaScript array. In the code, I use knockout.js to bind this array into the UI, which as you can see, requires very little code, instead using knockout’s data-bind attributes to bind server data to the UI. Of course, this is just one way to use the data – it’s entirely up to you to decide what to do with the data in your client code. Along the same lines, I can retrieve a single album to display when the user clicks on an album. The response returns the album information and a child array with all the songs. The code to do this is very similar to the last example where we pulled the albums array:$(".albumlink").live("click", function () { var id = $(this).data("id"); // title $.getJSON("albums/" + id, function (album) { ko.applyBindings(album, $("#divAlbumDialog")[0]); $("#divAlbumDialog").show(); }); }); Here the URL looks like this: /albums/Dirty%20Deeds, where the title is the ID captured from the clicked element’s data ID attribute. Explicitly Overriding Output Format When Web API automatically converts output using content negotiation, it does so by matching Accept header media types to the GlobalConfiguration.Configuration.Formatters and the SupportedMediaTypes of each individual formatter. You can add and remove formatters to globally affect what formats are available and it’s easy to create and plug in custom formatters.The example project includes a JSONP formatter that can be plugged in to provide JSONP support for requests that have a callback= querystring parameter. Adding, removing or replacing formatters is a global option you can use to manipulate content. It’s beyond the scope of this introduction to show how it works, but you can review the sample code or check out my blog entry on the subject (http://goo.gl/UAzaR). If automatic processing is not desirable in a particular Controller method, you can override the response output explicitly by returning an HttpResponseMessage instance. HttpResponseMessage is similar to ActionResult in ASP.NET MVC in that it’s a common way to return an abstract result message that contains content. HttpResponseMessage s parsed by the Web API framework using standard interfaces to retrieve the response data, status code, headers and so on[MS2] . Web API turns every response – including those Controller methods that return static results – into HttpResponseMessage instances. Explicitly returning an HttpResponseMessage instance gives you full control over the output and lets you mostly bypass WebAPI’s post-processing of the HTTP response on your behalf. HttpResponseMessage allows you to customize the response in great detail. Web API’s attention to detail in the HTTP spec really shows; many HTTP options are exposed as properties and enumerations with detailed IntelliSense comments. Even if you’re new to building REST-based interfaces, the API guides you in the right direction for returning valid responses and response codes. For example, assume that I always want to return JSON from the GetAlbums() controller method and ignore the default media type content negotiation. To do this, I can adjust the output format and headers as shown in Listing 4.public HttpResponseMessage GetAlbums() { var albums = AlbumData.Current.OrderBy(alb => alb.Artist); // Create a new HttpResponse with Json Formatter explicitly var resp = new HttpResponseMessage(HttpStatusCode.OK); resp.Content = new ObjectContent<IEnumerable<Album>>( albums, new JsonMediaTypeFormatter()); // Get Default Formatter based on Content Negotiation //var resp = Request.CreateResponse<IEnumerable<Album>>(HttpStatusCode.OK, albums); resp.Headers.ConnectionClose = true; resp.Headers.CacheControl = new CacheControlHeaderValue(); resp.Headers.CacheControl.Public = true; return resp; } This example returns the same IEnumerable<Album> value, but it wraps the response into an HttpResponseMessage so you can control the entire HTTP message result including the headers, formatter and status code. In Listing 4, I explicitly specify the formatter using the JsonMediaTypeFormatter to always force the content to JSON.  If you prefer to use the default content negotiation with HttpResponseMessage results, you can create the Response instance using the Request.CreateResponse method:var resp = Request.CreateResponse<IEnumerable<Album>>(HttpStatusCode.OK, albums); This provides you an HttpResponse object that's pre-configured with the default formatter based on Content Negotiation. Once you have an HttpResponse object you can easily control most HTTP aspects on this object. What's sweet here is that there are many more detailed properties on HttpResponse than the core ASP.NET Response object, with most options being explicitly configurable with enumerations that make it easy to pick the right headers and response codes from a list of valid codes. It makes HTTP features available much more discoverable even for non-hardcore REST/HTTP geeks. Non-Serialized Results The output returned doesn’t have to be a serialized value but can also be raw data, like strings, binary data or streams. You can use the HttpResponseMessage.Content object to set a number of common Content classes. Listing 5 shows how to return a binary image using the ByteArrayContent class from a Controller method. [HttpGet] public HttpResponseMessage AlbumArt(string title) { var album = AlbumData.Current.FirstOrDefault(abl => abl.AlbumName.StartsWith(title)); if (album == null) { var resp = Request.CreateResponse<ApiMessageError>( HttpStatusCode.NotFound, new ApiMessageError("Album not found")); return resp; } // kinda silly - we would normally serve this directly // but hey - it's a demo. var http = new WebClient(); var imageData = http.DownloadData(album.AlbumImageUrl); // create response and return var result = new HttpResponseMessage(HttpStatusCode.OK); result.Content = new ByteArrayContent(imageData); result.Content.Headers.ContentType = new MediaTypeHeaderValue("image/jpeg"); return result; } The image retrieval from Amazon is contrived, but it shows how to return binary data using ByteArrayContent. It also demonstrates that you can easily return multiple types of content from a single controller method, which is actually quite common. If an error occurs - such as a resource can’t be found or a validation error – you can return an error response to the client that’s very specific to the error. In GetAlbumArt(), if the album can’t be found, we want to return a 404 Not Found status (and realistically no error, as it’s an image). Note that if you are not using HTTP Verb-based routing or not accessing a method that starts with Get/Post etc., you have to specify one or more HTTP Verb attributes on the method explicitly. Here, I used the [HttpGet] attribute to serve the image. Another option to handle the error could be to return a fixed placeholder image if no album could be matched or the album doesn’t have an image. When returning an error code, you can also return a strongly typed response to the client. For example, you can set the 404 status code and also return a custom error object (ApiMessageError is a class I defined) like this:return Request.CreateResponse<ApiMessageError>( HttpStatusCode.NotFound, new ApiMessageError("Album not found") );   If the album can be found, the image will be returned. The image is downloaded into a byte[] array, and then assigned to the result’s Content property. I created a new ByteArrayContent instance and assigned the image’s bytes and the content type so that it displays properly in the browser. There are other content classes available: StringContent, StreamContent, ByteArrayContent, MultipartContent, and ObjectContent are at your disposal to return just about any kind of content. You can create your own Content classes if you frequently return custom types and handle the default formatter assignments that should be used to send the data out . Although HttpResponseMessage results require more code than returning a plain .NET value from a method, it allows much more control over the actual HTTP processing than automatic processing. It also makes it much easier to test your controller methods as you get a response object that you can check for specific status codes and output messages rather than just a result value. Routing Again Ok, let’s get back to the image example. Using the original routing we have setup using HTTP Verb routing there's no good way to serve the image. In order to return my album art image I’d like to use a URL like this: http://localhost/aspnetWebApi/albums/Dirty%20Deeds/image In order to create a URL like this, I have to create a new Controller because my earlier routes pointed to the AlbumApiController using HTTP Verb routing. HTTP Verb based routing is great for representing a single set of resources such as albums. You can map operations like add, delete, update and read easily using HTTP Verbs. But you cannot mix action based routing into a an HTTP Verb routing controller - you can only map HTTP Verbs and each method has to be unique based on parameter signature. You can't have multiple GET operations to methods with the same signature. So GetImage(string id) and GetAlbum(string title) are in conflict in an HTTP GET routing scenario. In fact, I was unable to make the above Image URL work with any combination of HTTP Verb plus Custom routing using the single Albums controller. There are number of ways around this, but all involve additional controllers.  Personally, I think it’s easier to use explicit Action routing and then add custom routes if you need to simplify your URLs further. So in order to accommodate some of the other examples, I created another controller – AlbumRpcApiController – to handle all requests that are explicitly routed via actions (/albums/rpc/AlbumArt) or are custom routed with explicit routes defined in the HttpConfiguration. I added the AlbumArt() method to this new AlbumRpcApiController class. For the image URL to work with the new AlbumRpcApiController, you need a custom route placed before the default route from Listing 1.RouteTable.Routes.MapHttpRoute( name: "AlbumRpcApiAction", routeTemplate: "albums/rpc/{action}/{title}", defaults: new { title = RouteParameter.Optional, controller = "AlbumRpcApi", action = "GetAblums" } ); Now I can use either of the following URLs to access the image: Custom route: (/albums/rpc/{title}/image)http://localhost/aspnetWebApi/albums/PowerAge/image Action route: (/albums/rpc/action/{title})http://localhost/aspnetWebAPI/albums/rpc/albumart/PowerAge Sending Data to the Server To send data to the server and add a new album, you can use an HTTP POST operation. Since I’m using HTTP Verb-based routing in the original AlbumApiController, I can implement a method called PostAlbum()to accept a new album from the client. Listing 6 shows the Web API code to add a new album.public HttpResponseMessage PostAlbum(Album album) { if (!this.ModelState.IsValid) { // my custom error class var error = new ApiMessageError() { message = "Model is invalid" }; // add errors into our client error model for client foreach (var prop in ModelState.Values) { var modelError = prop.Errors.FirstOrDefault(); if (!string.IsNullOrEmpty(modelError.ErrorMessage)) error.errors.Add(modelError.ErrorMessage); else error.errors.Add(modelError.Exception.Message); } return Request.CreateResponse<ApiMessageError>(HttpStatusCode.Conflict, error); } // update song id which isn't provided foreach (var song in album.Songs) song.AlbumId = album.Id; // see if album exists already var matchedAlbum = AlbumData.Current .SingleOrDefault(alb => alb.Id == album.Id || alb.AlbumName == album.AlbumName); if (matchedAlbum == null) AlbumData.Current.Add(album); else matchedAlbum = album; // return a string to show that the value got here var resp = Request.CreateResponse(HttpStatusCode.OK, string.Empty); resp.Content = new StringContent(album.AlbumName + " " + album.Entered.ToString(), Encoding.UTF8, "text/plain"); return resp; } The PostAlbum() method receives an album parameter, which is automatically deserialized from the POST buffer the client sent. The data passed from the client can be either XML or JSON. Web API automatically figures out what format it needs to deserialize based on the content type and binds the content to the album object. Web API uses model binding to bind the request content to the parameter(s) of controller methods. Like MVC you can check the model by looking at ModelState.IsValid. If it’s not valid, you can run through the ModelState.Values collection and check each binding for errors. Here I collect the error messages into a string array that gets passed back to the client via the result ApiErrorMessage object. When a binding error occurs, you’ll want to return an HTTP error response and it’s best to do that with an HttpResponseMessage result. In Listing 6, I used a custom error class that holds a message and an array of detailed error messages for each binding error. I used this object as the content to return to the client along with my Conflict HTTP Status Code response. If binding succeeds, the example returns a string with the name and date entered to demonstrate that you captured the data. Normally, a method like this should return a Boolean or no response at all (HttpStatusCode.NoConent). The sample uses a simple static list to hold albums, so once you’ve added the album using the Post operation, you can hit the /albums/ URL to see that the new album was added. The client jQuery code to call the POST operation from the client with jQuery is shown in Listing 7. var id = new Date().getTime().toString(); var album = { "Id": id, "AlbumName": "Power Age", "Artist": "AC/DC", "YearReleased": 1977, "Entered": "2002-03-11T18:24:43.5580794-10:00", "AlbumImageUrl": http://ecx.images-amazon.com/images/…, "AmazonUrl": http://www.amazon.com/…, "Songs": [ { "SongName": "Rock 'n Roll Damnation", "SongLength": 3.12}, { "SongName": "Downpayment Blues", "SongLength": 4.22 }, { "SongName": "Riff Raff", "SongLength": 2.42 } ] } $.ajax( { url: "albums/", type: "POST", contentType: "application/json", data: JSON.stringify(album), processData: false, beforeSend: function (xhr) { // not required since JSON is default output xhr.setRequestHeader("Accept", "application/json"); }, success: function (result) { // reload list of albums page.loadAlbums(); }, error: function (xhr, status, p3, p4) { var err = "Error"; if (xhr.responseText && xhr.responseText[0] == "{") err = JSON.parse(xhr.responseText).message; alert(err); } }); The code in Listing 7 creates an album object in JavaScript to match the structure of the .NET Album class. This object is passed to the $.ajax() function to send to the server as POST. The data is turned into JSON and the content type set to application/json so that the server knows what to convert when deserializing in the Album instance. The jQuery code hooks up success and failure events. Success returns the result data, which is a string that’s echoed back with an alert box. If an error occurs, jQuery returns the XHR instance and status code. You can check the XHR to see if a JSON object is embedded and if it is, you can extract it by de-serializing it and accessing the .message property. REST standards suggest that updates to existing resources should use PUT operations. REST standards aside, I’m not a big fan of separating out inserts and updates so I tend to have a single method that handles both. But if you want to follow REST suggestions, you can create a PUT method that handles updates by forwarding the PUT operation to the POST method:public HttpResponseMessage PutAlbum(Album album) { return PostAlbum(album); } To make the corresponding $.ajax() call, all you have to change from Listing 7 is the type: from POST to PUT. Model Binding with UrlEncoded POST Variables In the example in Listing 7 I used JSON objects to post a serialized object to a server method that accepted an strongly typed object with the same structure, which is a common way to send data to the server. However, Web API supports a number of different ways that data can be received by server methods. For example, another common way is to use plain UrlEncoded POST  values to send to the server. Web API supports Model Binding that works similar (but not the same) as MVC's model binding where POST variables are mapped to properties of object parameters of the target method. This is actually quite common for AJAX calls that want to avoid serialization and the potential requirement of a JSON parser on older browsers. For example, using jQUery you might use the $.post() method to send a new album to the server (albeit one without songs) using code like the following:$.post("albums/",{AlbumName: "Dirty Deeds", YearReleased: 1976 … },albumPostCallback); Although the code looks very similar to the client code we used before passing JSON, here the data passed is URL encoded values (AlbumName=Dirty+Deeds&YearReleased=1976 etc.). Web API then takes this POST data and maps each of the POST values to the properties of the Album object in the method's parameter. Although the client code is different the server can both handle the JSON object, or the UrlEncoded POST values. Dynamic Access to POST Data There are also a few options available to dynamically access POST data, if you know what type of data you're dealing with. If you have POST UrlEncoded values, you can dynamically using a FormsDataCollection:[HttpPost] public string PostAlbum(FormDataCollection form) { return string.Format("{0} - released {1}", form.Get("AlbumName"),form.Get("RearReleased")); } The FormDataCollection is a very simple object, that essentially provides the same functionality as Request.Form[] in ASP.NET. Request.Form[] still works if you're running hosted in an ASP.NET application. However as a general rule, while ASP.NET's functionality is always available when running Web API hosted inside of an  ASP.NET application, using the built in classes specific to Web API makes it possible to run Web API applications in a self hosted environment outside of ASP.NET. If your client is sending JSON to your server, and you don't want to map the JSON to a strongly typed object because you only want to retrieve a few simple values, you can also accept a JObject parameter in your API methods:[HttpPost] public string PostAlbum(JObject jsonData) { dynamic json = jsonData; JObject jalbum = json.Album; JObject juser = json.User; string token = json.UserToken; var album = jalbum.ToObject<Album>(); var user = juser.ToObject<User>(); return String.Format("{0} {1} {2}", album.AlbumName, user.Name, token); } There quite a few options available to you to receive data with Web API, which gives you more choices for the right tool for the job. Unfortunately one shortcoming of Web API is that POST data is always mapped to a single parameter. This means you can't pass multiple POST parameters to methods that receive POST data. It's possible to accept multiple parameters, but only one can map to the POST content - the others have to come from the query string or route values. I have a couple of Blog POSTs that explain what works and what doesn't here: Passing multiple POST parameters to Web API Controller Methods Mapping UrlEncoded POST Values in ASP.NET Web API   Handling Delete Operations Finally, to round out the server API code of the album example we've been discussin, here’s the DELETE verb controller method that allows removal of an album by its title:public HttpResponseMessage DeleteAlbum(string title) { var matchedAlbum = AlbumData.Current.Where(alb => alb.AlbumName == title) .SingleOrDefault(); if (matchedAlbum == null) return new HttpResponseMessage(HttpStatusCode.NotFound); AlbumData.Current.Remove(matchedAlbum); return new HttpResponseMessage(HttpStatusCode.NoContent); } To call this action method using jQuery, you can use:$(".removeimage").live("click", function () { var $el = $(this).parent(".album"); var txt = $el.find("a").text(); $.ajax({ url: "albums/" + encodeURIComponent(txt), type: "Delete", success: function (result) { $el.fadeOut().remove(); }, error: jqError }); }   Note the use of the DELETE verb in the $.ajax() call, which routes to DeleteAlbum on the server. DELETE is a non-content operation, so you supply a resource ID (the title) via route value or the querystring. Routing Conflicts In all requests with the exception of the AlbumArt image example shown so far, I used HTTP Verb routing that I set up in Listing 1. HTTP Verb Routing is a recommendation that is in line with typical REST access to HTTP resources. However, it takes quite a bit of effort to create REST-compliant API implementations based only on HTTP Verb routing only. You saw one example that didn’t really fit – the return of an image where I created a custom route albums/{title}/image that required creation of a second controller and a custom route to work. HTTP Verb routing to a controller does not mix with custom or action routing to the same controller because of the limited mapping of HTTP verbs imposed by HTTP Verb routing. To understand some of the problems with verb routing, let’s look at another example. Let’s say you create a GetSortableAlbums() method like this and add it to the original AlbumApiController accessed via HTTP Verb routing:[HttpGet] public IQueryable<Album> SortableAlbums() { var albums = AlbumData.Current; // generally should be done only on actual queryable results (EF etc.) // Done here because we're running with a static list but otherwise might be slow return albums.AsQueryable(); } If you compile this code and try to now access the /albums/ link, you get an error: Multiple Actions were found that match the request. HTTP Verb routing only allows access to one GET operation per parameter/route value match. If more than one method exists with the same parameter signature, it doesn’t work. As I mentioned earlier for the image display, the only solution to get this method to work is to throw it into another controller. Because I already set up the AlbumRpcApiController I can add the method there. First, I should rename the method to SortableAlbums() so I’m not using a Get prefix for the method. This also makes the action parameter look cleaner in the URL - it looks less like a method and more like a noun. I can then create a new route that handles direct-action mapping:RouteTable.Routes.MapHttpRoute( name: "AlbumRpcApiAction", routeTemplate: "albums/rpc/{action}/{title}", defaults: new { title = RouteParameter.Optional, controller = "AlbumRpcApi", action = "GetAblums" } ); As I am explicitly adding a route segment – rpc – into the route template, I can now reference explicit methods in the Web API controller using URLs like this: http://localhost/AspNetWebApi/rpc/SortableAlbums Error Handling I’ve already done some minimal error handling in the examples. For example in Listing 6, I detected some known-error scenarios like model validation failing or a resource not being found and returning an appropriate HttpResponseMessage result. But what happens if your code just blows up or causes an exception? If you have a controller method, like this:[HttpGet] public void ThrowException() { throw new UnauthorizedAccessException("Unauthorized Access Sucka"); } You can call it with this: http://localhost/AspNetWebApi/albums/rpc/ThrowException The default exception handling displays a 500-status response with the serialized exception on the local computer only. When you connect from a remote computer, Web API throws back a 500  HTTP Error with no data returned (IIS then adds its HTML error page). The behavior is configurable in the GlobalConfiguration:GlobalConfiguration .Configuration .IncludeErrorDetailPolicy = IncludeErrorDetailPolicy.Never; If you want more control over your error responses sent from code, you can throw explicit error responses yourself using HttpResponseException. When you throw an HttpResponseException the response parameter is used to generate the output for the Controller action. [HttpGet] public void ThrowError() { var resp = Request.CreateResponse<ApiMessageError>( HttpStatusCode.BadRequest, new ApiMessageError("Your code stinks!")); throw new HttpResponseException(resp); } Throwing an HttpResponseException stops the processing of the controller method and immediately returns the response you passed to the exception. Unlike other Exceptions fired inside of WebAPI, HttpResponseException bypasses the Exception Filters installed and instead just outputs the response you provide. In this case, the serialized ApiMessageError result string is returned in the default serialization format – XML or JSON. You can pass any content to HttpResponseMessage, which includes creating your own exception objects and consistently returning error messages to the client. Here’s a small helper method on the controller that you might use to send exception info back to the client consistently:private void ThrowSafeException(string message, HttpStatusCode statusCode = HttpStatusCode.BadRequest) { var errResponse = Request.CreateResponse<ApiMessageError>(statusCode, new ApiMessageError() { message = message }); throw new HttpResponseException(errResponse); } You can then use it to output any captured errors from code:[HttpGet] public void ThrowErrorSafe() { try { List<string> list = null; list.Add("Rick"); } catch (Exception ex) { ThrowSafeException(ex.Message); } }   Exception Filters Another more global solution is to create an Exception Filter. Filters in Web API provide the ability to pre- and post-process controller method operations. An exception filter looks at all exceptions fired and then optionally creates an HttpResponseMessage result. Listing 8 shows an example of a basic Exception filter implementation.public class UnhandledExceptionFilter : ExceptionFilterAttribute { public override void OnException(HttpActionExecutedContext context) { HttpStatusCode status = HttpStatusCode.InternalServerError; var exType = context.Exception.GetType(); if (exType == typeof(UnauthorizedAccessException)) status = HttpStatusCode.Unauthorized; else if (exType == typeof(ArgumentException)) status = HttpStatusCode.NotFound; var apiError = new ApiMessageError() { message = context.Exception.Message }; // create a new response and attach our ApiError object // which now gets returned on ANY exception result var errorResponse = context.Request.CreateResponse<ApiMessageError>(status, apiError); context.Response = errorResponse; base.OnException(context); } } Exception Filter Attributes can be assigned to an ApiController class like this:[UnhandledExceptionFilter] public class AlbumRpcApiController : ApiController or you can globally assign it to all controllers by adding it to the HTTP Configuration's Filters collection:GlobalConfiguration.Configuration.Filters.Add(new UnhandledExceptionFilter()); The latter is a great way to get global error trapping so that all errors (short of hard IIS errors and explicit HttpResponseException errors) return a valid error response that includes error information in the form of a known-error object. Using a filter like this allows you to throw an exception as you normally would and have your filter create a response in the appropriate output format that the client expects. For example, an AJAX application can on failure expect to see a JSON error result that corresponds to the real error that occurred rather than a 500 error along with HTML error page that IIS throws up. You can even create some custom exceptions so you can differentiate your own exceptions from unhandled system exceptions - you often don't want to display error information from 'unknown' exceptions as they may contain sensitive system information or info that's not generally useful to users of your application/site. This is just one example of how ASP.NET Web API is configurable and extensible. Exception filters are just one example of how you can plug-in into the Web API request flow to modify output. Many more hooks exist and I’ll take a closer look at extensibility in Part 2 of this article in the future. Summary Web API is a big improvement over previous Microsoft REST and AJAX toolkits. The key features to its usefulness are its ease of use with simple controller based logic, familiar MVC-style routing, low configuration impact, extensibility at all levels and tight attention to exposing and making HTTP semantics easily discoverable and easy to use. Although none of the concepts used in Web API are new or radical, Web API combines the best of previous platforms into a single framework that’s highly functional, easy to work with, and extensible to boot. I think that Microsoft has hit a home run with Web API. Related Resources Where does ASP.NET Web API fit? Sample Source Code on GitHub Passing multiple POST parameters to Web API Controller Methods Mapping UrlEncoded POST Values in ASP.NET Web API Creating a JSONP Formatter for ASP.NET Web API Removing the XML Formatter from ASP.NET Web API Applications© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Web Application Problems (web.config errors) HTTP 500.19 with IIS7.5 and ASP.NET v2

    - by Django Reinhardt
    This is driving the whole team crazy. There must be some simple mis-configured part of IIS or our Web Server, but every time we try to run out ASP.NET Web Application on IIS 7.5 we get the following error... Here's the error in full: HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. `Detailed Error Information` Module IIS Web Core Notification Unknown Handler Not yet determined Error Code 0x8007000d Config Error Config File \\?\E:\wwwroot\web.config Requested URL http://localhost:80/Default.aspx Physical Path Logon Method Not yet determined Logon User Not yet determined Config Source -1: 0: The machine is running Windows Server 2008 R2. We're developing our Web Application using Visual Studio 2008. According to Microsoft the code 8007000d means there's a syntax error in our web.config -- except the project builds and runs fine locally. Looking at the web.config in XML Notepad doesn't bring up any syntax errors, either. I'm assuming it must be some sort of poor configuration on my part...? Does anyone know where I might find further information about the error? Nothing is showing in EventViewer, either :( Not sure what else would be helpful to mention... Assistance is greatly appreciated. Thanks! UPDATES! - POSTED WEB.CONFIG BELOW Ok, since I posted the original question above, I've tracked down the precise lines in the web.config that were causing the error. Here are the lines (they appear between <System.webServer> tags)... <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </httpHandlers> Note: If I delete the lines between the <httpHandlers> I STILL get the error. I literally have to delete <httpHandlers> (and the lines inbetween) to stop getting the above error. Once I've done this I get a new 500.19 error, however. Thankfully, this time IIS actually tells me which bit of the web.config is causing a problem... <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory,System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </handlers> Looking at these lines it's clear the problem has migrated further within the same <system.webServer> tag to the <handlers> tag. The new error is also more explicit and specifically complains that it doesn't recognize the attribute "validate" (as seen on the third line above). Removing this attribute then makes it complain that the same line doesn't have the required "name" attribute. Adding this attribute then brings up ASP.NET error... Could not load file or assembly 'System.web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56' or one of its dependencies. The system cannot find the file specified. Obviously I think these new errors have just arisen from me deleting the <httpHandlers> tags in the first place -- they're obviously needed by the application -- so the question remains: Why would these tags kick up an error in IIS in the first place??? Do I need to install something to IIS to make it work with them? Thanks again for any help. WEB.CONFIG Here's the troublesome bits of our web.Config... I hope this helps someone find our problem! <system.Web> <!-- stuff cut out --> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </httpModules> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </modules> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory,System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=f2cb5667dc123a56"/> </handlers> </system.webServer>

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >