Search Results

Search found 57312 results on 2293 pages for 'windows sbs'.

Page 1/2293 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • SBS 2008 BPA Warnings After Migration From SBS 2003

    - by Nicholas Piasecki
    We just finished a we-know-just-enough-to-be-dangerous migration from SBS 2003 to SBS 2008, and things seem to have gone relatively smoothly. After running the SBS 2008 Best Practices Analyzer on the destination server, we've got three warning messages, and I can't tell if they're important or not. First, the easy one: SMTP Port (TCP 25 Status): The Edgetransport.exe process should listen on SMTP port 25, but that port is owned by the process. I don't think that this one is a big deal--e-mail is flowing through the SMTP connector. Since there are two spaces between "the" and "process," I'm assuming that for some reason BPA just couldn't figure out the owning process name and this is just some sloppy programming when displaying the message. (Indeed, on subsequent runs of the BPA this message goes away, and other times it comes back.) Now, two more scary sounding ones: No DNS name server records: There are no DNS name server (NS) resource records in the _msdcs sub-domain in the forward lookup zone for Windows SBS 2008. and, similarly, No DNS name server records: There are no DNS name server (NS) resource records in the _msdcs zone for Windows SBS 2008. Now for these two, everything appears to be functioning correctly--but I'm assuming this is a weird state as a result of the SBS 2003 to 2008 migration. Can anyone provide any pointers on how to fix it, or whether or not it can be safely ignored? Thanks!

    Read the article

  • Can't uninstall SBS 2003 in sbs 2003 -> sbs 2008 migration

    - by ChrisMuench
    I'm trying to remove sbs from my sbs 2003 server. Also I'm logged in as Administrator. However When I start to go through the wizard it gives me the following error. You must be a member of the Domain Admins, Schema Admins, and Enterprise Admins group. I then did some research and found this (http://support.microsoft.com/kb/842694) and I came to the point where it says to delete the server from Sites and Services. However when I clicked delete it wanted me to dcpromo the box first. However I have read you have to uninstall exchange first and then dcpromo it to remove AD. Any ideas?

    Read the article

  • Moving mails from SBS 2008 to SBS 2011

    - by starchx
    we are going to upgrade server from SBS 2008 to a new hardware server with SBS 2011. Due to non-experience in Server Migration (eg, answer file), we have decided to choose Clean Install. We have 12 users so that's not too bad. The most challenge problem is to move over all the emails for each user, some user have 5GB inbox. The one method I know is to login to each user account and export the emails to PST file using Outlook 2007. Then connect to new SBS 2011 and import the PST into new inbox. Do we have any other better/quicker ways? Thanks

    Read the article

  • Windows 7 Phone Database Rapid Repository – V2.0 Beta Released

    - by SeanMcAlinden
    Hi All, A V2.0 beta has been released for the Windows 7 Phone database Rapid Repository, this can be downloaded at the following: http://rapidrepository.codeplex.com/ Along with the new View feature which greatly enhances querying and performance, various bugs have been fixed including a more serious bug with the caching that caused the GetAll() method to sometimes return inconsistent results (I’m a little bit embarrased by this bug). If you are currently using V1.0 in development, I would recommend swapping in the beta immediately. A full release will be available very shortly, I just need a few more days of testing and some input from other users/testers.   *Breaking Changes* The only real change is the RapidContext has moved under the main RapidRepository namespace. Various internal methods have been actually made ‘internal’ and replaced with a more friendly API (I imagine not many users will notice this change). Hope you like it Kind Regards, Sean McAlinden

    Read the article

  • SBS 2003 to SBS 2011

    - by Steve
    We've migrated SBS 2003 to SBS 2011...so far everything has gone smoothly. We're in the final phase of migrating the last amount of data over. Is there a way I can check to be sure that our old server isn't restarting due to the 21 day grace period? As our 21 days is up on Thursday. Yet it's restarting on its own now...maybe a power supply issue...? Is there any way to extend the 21 days? or roll it back? or does this take a call to MSFT? Very odd...

    Read the article

  • SBS domain name choice

    - by sandymac
    We are about to set up SBS 2011 at my small company < 10 users. My collaborator wants to name the SBS domain "example.local" . I'm of the opinion we should name the SBS domain "corp.example.com" and setup DNS so the "corp" record is a NS record to the SBS server's private IP. FYI: "Example.com" isn't the real domain name and while the website is hosted outside our office, email will be stored on the SBS server in our office after passing though a spam filtering smart host hosted elsewhere too.

    Read the article

  • Windows 7 Phone Database – Querying with Views and Filters

    - by SeanMcAlinden
    I’ve just added a feature to Rapid Repository to greatly improve how the Windows 7 Phone Database is queried for performance (This is in the trunk not in Release V1.0). The main concept behind it is to create a View Model class which would have only the minimum data you need for a page. This View Model is then stored and retrieved rather than the whole list of entities. Another feature of the views is that they can be pre-filtered to even further improve performance when querying. You can download the source from the Microsoft Codeplex site http://rapidrepository.codeplex.com/. Setting up a view Lets say you have an entity that stores lots of data about a game result for example: GameScore entity public class GameScore : IRapidEntity {     public Guid Id { get; set; }     public string GamerId {get;set;}     public string Name { get; set; }     public Double Score { get; set; }     public Byte[] ThumbnailAvatar { get; set; }     public DateTime DateAdded { get; set; } }   On your page you want to display a list of scores but you only want to display the score and the date added, you create a View Model for displaying just those properties. GameScoreView public class GameScoreView : IRapidView {     public Guid Id { get; set; }     public Double Score { get; set; }     public DateTime DateAdded { get; set; } }   Now you have the view model, the first thing to do is set up the view at application start up. This is done using the following syntax. View Setup public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score }); } As you can see, using a little bit of lambda syntax, you put in the code for constructing a single view, this is used internally for mapping an entity to a view. *Note* you do not need to map the Id property, this is done automatically, a view model id will always be the same as it’s corresponding entity.   Adding Filters One of the cool features of the view is that you can add filters to limit the amount of data stored in the view, this will dramatically improve performance. You can add multiple filters using the fluent syntax if required. In this example, lets say that you will only ever show the scores for the last 10 days, you could add a filter like the following: Add single filter public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score })         .AddFilter(x => x.DateAdded > DateTime.Now.AddDays(-10)); } If you wanted to further limit the data, you could also say only scores above 100: Add multiple filters public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score })         .AddFilter(x => x.DateAdded > DateTime.Now.AddDays(-10))         .AddFilter(x => x.Score > 100); }   Querying the view model So the important part is how to query the data. This is done using the repository, there is a method called Query which accepts the type of view as a generic parameter (you can have multiple View Model types per entity type) You can either use the result of the query method directly or perform further querying on the result is required. Querying the View public void DisplayScores() {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     List<GameScoreView> scores = repository.Query<GameScoreView>();       // display logic } Further Filtering public void TodaysScores() {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     List<GameScoreView> todaysScores = repository.Query<GameScoreView>().Where(x => x.DateAdded > DateTime.Now.AddDays(-1)).ToList();       // display logic }   Retrieving the actual entity Retrieving the actual entity can be done easily by using the GetById method on the repository. Say for example you allow the user to click on a specific score to get further information, you can use the Id populated in the returned View Model GameScoreView and use it directly on the repository to retrieve the full entity. Get Full Entity public void GetFullEntity(Guid gameScoreViewId) {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     GameScore fullEntity = repository.GetById(gameScoreViewId);       // display logic } Synchronising The View If you are upgrading from Rapid Repository V1.0 and are likely to have data in the repository already, you will need to perform a synchronisation to ensure the views and entities are fully in sync. You can either do this as a one off during the application upgrade or if you are a little more cautious, you could run this at each application start up. Synchronise the view public void MyUpgradeTasks() {     RapidRepository<GameScore>.SynchroniseView<GameScoreView>(); } It’s worth noting that in normal operation, the view keeps itself in sync with the entities so this is only really required if you are upgrading from V1.0 to V2.0 when it gets released shortly.   Summary I really hope you like this feature, it will be great for performance and I believe supports good practice by promoting the use of View Models for specific pages. I’m hoping to produce a beta for this over the next few days, I just want to add some more tests and hopefully iron out any bugs. I would really appreciate any thoughts on this feature and would really love to know of any bugs you find. You can download the source from the following : http://rapidrepository.codeplex.com/ Kind Regards, Sean McAlinden.

    Read the article

  • Easily Tweak Windows 7 and Vista by Adding Tabs to Explorer, Creating Context Menu Entries, and More

    - by Lori Kaufman
    7Plus is a very useful, free tool for Windows 7 and Vista that adds a lot of features to Windows, such as the ability to add tabs to Windows Explorer, set up hotkeys for common tasks, and other settings to make working with Windows easier. 7Plus is powered by AutoHotkey and allows most of the features to be fully customized. You can also create your own features by creating custom events. 7Plus does not need to be installed. Simply extract the files from the .zip file you downloaded (see the link at the end of this article) and double-click on the 7plus.exe file. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • New SBS 2011 installation (not migration) in an existing 2008 R2 domain

    - by Tong Wang
    My current network setup has two servers: a Windows 2008 R2 with TMG 2010 as edge firewall (TMG server), a second 2008 R2 with DC, DNS and Hyper-V roles (DCDNS server). I was trying to install SBS 2011 as a child partition on DCDNS, first I installed SBS 2011 in English and did the migration successfully. However, later on, I found that I can't change the display language in SBS 2011 once it's installed (but the clients require a different language), so I had to re-install the SBS in a different language. It is during the re-installation that the problem came up: the migration can't be completed with some error message stating "can't access the source server". I re-ran the migration preparation tool, but it didn't make any difference. I wonder if it's because the source server can only be "migrated" once. Since I only need to setup a handful of users and computers, so I decided to do a new install of SBS and picked a different domain name. But I can't get the SBS to connect to LAN: it can't ping other servers, neither can other servers ping the SBS server. I've tried to stop the DC/DNS services on DCDNS and restart SBS, but with no difference. Anyone has idea how to fix this problem?

    Read the article

  • Minimize Windows Live Mail to the System Tray in Windows 7

    - by Asian Angel
    Are you frustrated that you can not minimize Windows Live Mail to the system tray in Windows 7? With just a few tweaks you can make Live Mail minimize to the system tray just like in earlier versions of Windows. Windows Live Mail in Windows Vista In Windows Vista you could minimize Windows Live Mail to the system tray if desired using the context menu… Windows Live Mail in Windows 7 In Windows 7 you can minimize the app window but not hide it in the system tray. The Hide window when minimized menu entry is missing from the context menu and all you have is the window icon taking up space in your taskbar. How to Add the Context Menu Entry Back Right click on the program shortcut(s) and select properties. When the properties window opens click on the compatibility tab and enable the Run this program in compatibility mode for setting. Choose Windows Vista (Service Pack 2) from the drop-down menu and click OK. Once you have restarted Windows Live Mail you will have access to the Hide window when minimized menu entry again. And just like that your taskbar is clear again when Windows Live Mail is minimized. If you have wanted the ability to minimize Windows Live Mail to the system tray in Windows 7 then this little tweak will fix the problem. Similar Articles Productive Geek Tips Make Windows Live Messenger Minimize to the System Tray in Windows 7Move Live Messenger Icon to the System Tray in Windows 7Backup Windows Mail Messages and Contacts in VistaTurn off New Mail Notification for PocoMail Junk Mail FolderPut Your PuTTY in the System Tray TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

    Read the article

  • Stupid Geek Tricks: How to Perform Date Calculations in Windows Calculator

    - by Usman
    Would you like to know how many days old are you today? Can you tell what will be the date 78 days from now? How many days are left till Christmas? How many days have passed since your last birthday? All these questions have their answers hidden within Windows! Curious? Keep reading to see how you can answer these questions in an instant using Windows’ built-in utility called ‘Calculator’. No, no. This isn’t a guide to show you how to perform basic calculations on calculator. This is an application of a unique feature in the Calculator application in Windows, and the feature is called Date Calculation. Most of us don’t really use the Windows’ Calculator that much, and when we do, it’s only for an instant (to do small calculations). However, it is packed with some really interesting features, so lets go ahead and see how Date Calculation works. To start, open Calculator by pressing the winkey, and type calcul… (it should’ve popped up by now, if not, you can type the rest of the ‘…ator’ as well just to be sure). Open it. And by the way, this date calculation function works in both Windows 7 and 8. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • Rapid Repository – Silverlight Development

    - by SeanMcAlinden
    Hi All, One of the questions I was recently asked was whether the Rapid Repository would work for normal Silverlight development as well as for the Windows 7 Phone. I can confirm that the current code in the trunk will definitely work for both the Windows 7 Phone and normal Silverlight development. I haven’t tested V.1.0 for compatibility but V2.0 which will be released fairly soon will work absolutely fine.   Kind Regards, Sean McAlinden.

    Read the article

  • The 35 Best Tips and Tricks for Maintaining Your Windows PC

    - by Lori Kaufman
    When working (or playing) on your computer, you probably don’t think much about how you are going to clean up your files, backup your data, keep your system virus free, etc. However, these are tasks that need attention. We’ve published useful article about different aspects of maintaining your computer. Below is a list our most useful articles about maintaining your computer, operating system, software, and data. HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

    Read the article

  • Windows 8 / IIS 8 Concurrent Requests Limit

    - by OWScott
    IIS 8 on Windows Server 2012 doesn’t have any fixed concurrent request limit, apart from whatever limit would be reached when resources are maxed. However, the client version of IIS 8, which is on Windows 8, does have a concurrent connection request limitation to limit high traffic production uses on a client edition of Windows. Starting with IIS 7 (Windows Vista), the behavior changed from previous versions.  In previous client versions of IIS, excess requests would throw a 403.9 error message (Access Forbidden: Too many users are connected.).  Instead, Windows Vista, 7 and 8 queue excessive requests so that they will be handled gracefully, although there is a maximum number of requests that will be processed simultaneously. Thomas Deml provided a concurrent request chart for Windows Vista many years ago, but I have been unable to find an equivalent chart for Windows 8 so I asked Wade Hilmo from the IIS team what the limits are.  Since this is controlled not by the IIS team itself but rather from the Windows licensing team, he asked around and found the authoritative answer, which I’ll provide below. Windows 8 – IIS 8 Concurrent Requests Limit Windows 8 3 Windows 8 Professional 10 Windows RT N/A since IIS does not run on Windows RT Windows 7 – IIS 7.5 Concurrent Requests Limit Windows 7 Home Starter 1 Windows 7 Basic 1 Windows 7 Premium 3 Windows 7 Ultimate, Professional, Enterprise 10 Windows Vista – IIS 7 Concurrent Requests Limit Windows Vista Home Basic (IIS process activation and HTTP processing only) 3 Windows Vista Home Premium 3 Windows Vista Ultimate, Professional 10 Windows Server 2003, Windows Server 2008, Windows Server 2008 R2 and Windows Server 2012 allow an unlimited amount of simultaneously requests.

    Read the article

  • How to Use Windows’ Advanced Search Features: Everything You Need to Know

    - by Chris Hoffman
    You should never have to hunt down a lost file on modern versions of Windows — just perform a quick search. You don’t even have to wait for a cartoon dog to find your files, like on Windows XP. The Windows search indexer is constantly running in the background to make quick local searches possible. This enables the kind of powerful search features you’d use on Google or Bing — but for your local files. Controlling the Indexer By default, the Windows search indexer watches everything under your user folder — that’s C:\Users\NAME. It reads all these files, creating an index of their names, contents, and other metadata. Whenever they change, it notices and updates its index. The index allows you to quickly find a file based on the data in the index. For example, if you want to find files that contain the word “beluga,” you can perform a search for “beluga” and you’ll get a very quick response as Windows looks up the word in its search index. If Windows didn’t use an index, you’d have to sit and wait as Windows opened every file on your hard drive, looked to see if the file contained the word “beluga,” and moved on. Most people shouldn’t have to modify this indexing behavior. However, if you store your important files in other folders — maybe you store your important data a separate partition or drive, such as at D:\Data — you may want to add these folders to your index. You can also choose which types of files you want to index, force Windows to rebuild the index entirely, pause the indexing process so it won’t use any system resources, or move the index to another location to save space on your system drive. To open the Indexing Options window, tap the Windows key on your keyboard, type “index”, and click the Indexing Options shortcut that appears. Use the Modify button to control the folders that Windows indexes or the Advanced button to control other options. To prevent Windows from indexing entirely, click the Modify button and uncheck all the included locations. You could also disable the search indexer entirely from the Programs and Features window. Searching for Files You can search for files right from your Start menu on Windows 7 or Start screen on Windows 8. Just tap the Windows key and perform a search. If you wanted to find files related to Windows, you could perform a search for “Windows.” Windows would show you files that are named Windows or contain the word Windows. From here, you can just click a file to open it. On Windows 7, files are mixed with other types of search results. On Windows 8 or 8.1, you can choose to search only for files. If you want to perform a search without leaving the desktop in Windows 8.1, press Windows Key + S to open a search sidebar. You can also initiate searches directly from Windows Explorer — that’s File Explorer on Windows 8. Just use the search box at the top-right of the window. Windows will search the location you’ve browsed to. For example, if you’re looking for a file related to Windows and know it’s somewhere in your Documents library, open the Documents library and search for Windows. Using Advanced Search Operators On Windows 7, you’ll notice that you can add “search filters” form the search box, allowing you to search by size, date modified, file type, authors, and other metadata. On Windows 8, these options are available from the Search Tools tab on the ribbon. These filters allow you to narrow your search results. If you’re a geek, you can use Windows’ Advanced Query Syntax to perform advanced searches from anywhere, including the Start menu or Start screen. Want to search for “windows,” but only bring up documents that don’t mention Microsoft? Search for “windows -microsoft”. Want to search for all pictures of penguins on your computer, whether they’re PNGs, JPEGs, or any other type of picture file? Search for “penguin kind:picture”. We’ve looked at Windows’ advanced search operators before, so check out our in-depth guide for more information. The Advanced Query Syntax gives you access to options that aren’t available in the graphical interface. Creating Saved Searches Windows allows you to take searches you’ve made and save them as a file. You can then quickly perform the search later by double-clicking the file. The file functions almost like a virtual folder that contains the files you specify. For example, let’s say you wanted to create a saved search that shows you all the new files created in your indexed folders within the last week. You could perform a search for “datecreated:this week”, then click the Save search button on the toolbar or ribbon. You’d have a new virtual folder you could quickly check to see your recent files. One of the best things about Windows search is that it’s available entirely from the keyboard. Just press the Windows key, start typing the name of the file or program you want to open, and press Enter to quickly open it. Windows 8 made this much more obnoxious with its non-unified search, but unified search is finally returning with Windows 8.1.     

    Read the article

  • Which is Better? The Start Screen in Windows 8 or the Old Start Menu? [Analysis]

    - by Asian Angel
    There has been quite a bit of controversy surrounding Microsoft’s emphasis on the new Metro UI Start Screen in Windows 8, but when it comes down to it which is really better? The Start Screen in Windows 8 or the old Start Menu? Tech blog 7 Tutorials has done a quick analysis to see which one actually works better (and faster) when launching applications and doing searches. Images courtesy of 7 Tutorials. You can view the results and a comparison table by visiting the blog post linked below. Windows 8 Analysis: Is the Start Screen an Improvement vs. the Start Menu? [7 Tutorials] How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

    Read the article

  • Always a path to the internet even in Windows SBS is off

    - by Mark
    Hello all, is it possible to have a configuration in a Windows 2003 SBS environment where in the event that the SBS box crashed/turned off/ or is being worked on that there can still exist a path to the internet for domain users and visitors to still use? I would like to have the standalone router issue DHCP IPs. The primary DNS would point to the SBS, the secondary wouuld point to the ISP DNS Server. My theory was that if someone was using the internet and the SBS box went down they wouldn't be able to access the network shares but still be able to use the internet. (We are moving everything into the clouds with Google Apps Non-Profit) Does this seem like a reasonable configuration? Or are they're pitfalls that I will fall into? Thanks Mark

    Read the article

  • Upgrading Windows 8 boot to VHD to Windows 8.1&ndash;Step by step guide

    - by Liam Westley
    Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/19/upgrading-windows-8-boot-to-vhd-to-windows-8.1ndashstep-by.aspxBoot to VHD – dual booting Windows 7 and Windows 8 became easy When Windows 8 arrived, quite a few people decided that they would still dual boot their machines, and instead of mucking about with resizing disk partitions to free up space for Windows 8 they decided to use the boot from VHD feature to create a huge hard disc image into which Windows 8 could be installed.  Scott Hanselman wrote this installation guide, while I myself used the installation guide from Ed Bott of ZD net fame. Boot to VHD is a great solution, it achieves a dual boot, can be backed up easily and had virtually no effect on the original Windows 7 partition. As a developer who has dual booted Windows operating systems for years, hacking boot.ini files, the boot to VHD was a much easier solution. Upgrade to Windows 8.1 – ah, you can’t do that on a virtual disk installation (boot to VHD) Last week the final version of Windows 8.1 arrived, and I went into the Windows Store to upgrade.  Luckily I’m on a fast download service, and use an SSD, because once the upgrade was downloaded and prepared Windows informed that This PC can’t run Windows 8.1, and provided the reason, You can’t install Windows on a virtual drive.  You can see an image of the message and discussion that sparked my search for a solution in this Microsoft Technet forum post. I was determined not to have to resize partitions yet again and fiddle with VHD to disk utilities and back again, and in the end I did succeed in upgrading to a Windows 8.1 boot to VHD partition.  It takes quite a bit of effort though … tldr; Simple steps of how you upgrade Boot into Windows 7 – make a copy of your Windows 8 VHD, to become Windows 8.1 Enable Hyper-V in your Windows 8 (the original boot to VHD partition) Create a new virtual machine, attaching the copy of your Windows 8 VHD Start the virtual machine, upgrade it via the Windows Store to Windows 8.1 Shutdown the virtual machine Boot into Windows 7 – use the bcedit tool to create a new Windows 8.1 boot to VHD option (pointing at the copy) Boot into the new Windows 8.1 option Reactivate Windows 8.1 (it will have become deactivated by running under Hyper-V) Remove the original Windows 8 VHD, and in Windows 7 use bcedit to remove it from the boot menu Things you’ll need A system that can run Hyper-V under Windows 8 (Intel i5, i7 class CPU) Enough space to have your original Windows 8 boot to VHD and a copy at the same time An ISO or DVD for Windows 8 to create a bootable Windows 8 partition Step by step guide Boot to your base o/s, the real one, Windows 7. Make a copy of the Windows 8 VHD file that you use to boot Windows 8 (via boot from VHD) – I copied it from a folder on C: called VHD-Win8 to VHD-Win8.1 on my N: drive. Reboot your system into Windows 8, and enable Hyper-V if not already present (this may require reboot) Use the Hyper-V manager , create a new Hyper-V machine, using half your system memory, and use the option to attach an existing VHD on the main IDE controller – this will be the new copy you made in Step 2. Start the virtual machine, use Connect to view it, and you’ll probably discover it cannot boot as there is no boot record If this is the case, go to Hyper-V manager, edit the Settings for the virtual machine to attach an ISO of a Windows 8 DVD to the second IDE controller. Start the virtual machine, use Connect to view it, and it should now attempt a fresh installation of Windows 8.  You should select Advanced Options and choose Repair - this will make VHD bootable When the setup reboots your virtual machine, turn off the virtual machine, and remove the ISO of the Windows 8 DVD from the virtual machine settings. Start virtual machine, use Connect to view it.  You will see the devices to be re-discovered (including your quad CPU becoming single CPU).  Eventually you should see the Windows Login screen. You may notice that your desktop background (Win+D) will have turned black as your Windows installation has become deactivate due to the hardware changes between your real PC and Hyper-V. Fortunately becoming deactivated, does not stop you using the Windows Store, where you can select the update to Windows 8.1. You can now watch the progress joy of the Windows 8 update; downloading, preparing to update, checking compatibility, gathering info, preparing to restart, and finally, confirm restart - remember that you are restarting your virtual machine sitting on the copy of the VHD, not the Windows 8 boot to VHD you are currently using to run Hyper-V (confused yet?) After the reboot you get the real upgrade messages; setting up x%, xx%, (quite slow) After a while, Getting ready Applying PC Settings x%, xx% (really slow) Updating your system (fast) Setting up a few more things x%, (quite slow) Getting ready, again Accept license terms Express settings Confirmed previous password Next, I had to set up a Microsoft account – which is possibly now required, and not optional Using the Microsoft account required a 2 factor authorization, via text message, a 7 digit code for me Finalising settings Blank screen, HI .. We're setting up things for you (similar to original Windows 8 install) 'You can get new apps from the Store', below which is ’Installing your apps’ - I had Windows Media Center which is counts as an app from the Store ‘Taking care of a few things’, below which is ‘Installing your apps’ ‘Taking care of a few things’, below ‘Don't turn off your PC’ ‘Getting your apps ready’, below ‘Don't turn off your PC’ ‘Almost ready’, below ‘Don't turn off your PC’ … finally, we get the Windows 8.1 start menu, and a quick Win+D to check the desktop confirmed all the application icons I expected, pinned items on the taskbar, and one app moaning about a missing drive At this point the upgrade is complete – you can shutdown the virtual machine Reboot from the original Windows 8 and return to Windows 7 to configure booting to the Windows 8.1 copy of the VHD In an administrator command prompt do following use the bcdedit tool (from an MSDN blog about configuring VHD to boot in Windows 7) Type bcedit to list the current boot options, so you can copy the GUID (complete with brackets/braces) for the original Windows 8 boot to VHD Create a new menu option, copy of the Windows 8 option; bcdedit /copy {originalguid} /d "Windows 8.1" Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} device vhd=[D:]\Image.vhd Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} osdevice vhd=[D:]\Image.vhd Set autodetection of the HAL (may already be set); bcdedit /set {newguid} detecthal on Reboot from Windows 7 and select the new option 'Windows 8.1' on the boot menu, and you’ll have some messages to look at, as your hardware is redetected (as you are back from 1 CPU to 4 CPUs) ‘Getting devices ready, blank then %xx, with occasional blank screen, for the graphics driver, (fast-ish) Getting Ready message (fast) You will have to suffer one final reboots, choose 'Windows 8.1' and you can now login to a lovely Windows 8.1 start screen running on non virtualized hardware via boot to VHD After checking everything is running fine, you can now choose to Activate Windows, which for me was a toll free phone call to the automated system where you type in lots of numbers to be given a whole bunch of new activation codes. Once you’re happy with your new Windows 8.1 boot to VHD, and no longer need the Windows 8 boot to VHD, feel free to delete the old one.  I do believe once you upgrade, you are no longer licensed to use it anyway. There, that was simple wasn’t it? Looking at the huge list of steps it took to perform this upgrade, you may wonder whether I think this is worth it.  Well, I think it is worth booting to VHD.  It makes backups a snap (go to Windows 7, copy the VHD, you backed up the o/s) and helps with disk management – want to move the o/s, you can move the VHD and repoint the boot menu to the new location. The downside is that Microsoft has complete neglected to support boot to VHD as an upgradable option.  Quite a poor decision in my opinion, and if you read twitter and the forums quite a few people agree with that view.  It’s a shame this got missed in the work on creating the upgrade packages for Windows 8.1.

    Read the article

  • 8 Backup Tools Explained for Windows 7 and 8

    - by Chris Hoffman
    Backups on Windows can be confusing. Whether you’re using Windows 7 or 8, you have quite a few integrated backup tools to think about. Windows 8 made quite a few changes, too. You can also use third-party backup software, whether you want to back up to an external drive or back up your files to online storage. We won’t cover third-party tools here — just the ones built into Windows. Backup and Restore on Windows 7 Windows 7 has its own Backup and Restore feature that lets you create backups manually or on a schedule. You’ll find it under Backup and Restore in the Control Panel. The original version of Windows 8 still contained this tool, and named it Windows 7 File Recovery. This allowed former Windows 7 users to restore files from those old Windows 7 backups or keep using the familiar backup tool for a little while. Windows 7 File Recovery was removed in Windows 8.1. System Restore System Restore on both Windows 7 and 8 functions as a sort of automatic system backup feature. It creates backup copies of important system and program files on a schedule or when you perform certain tasks, such as installing a hardware driver. If system files become corrupted or your computer’s software becomes unstable, you can use System Restore to restore your system and program files from a System Restore point. This isn’t a way to back up your personal files. It’s more of a troubleshooting feature that uses backups to restore your system to its previous working state. Previous Versions on Windows 7 Windows 7′s Previous Versions feature allows you to restore older versions of files — or deleted files. These files can come from backups created with Windows 7′s Backup and Restore feature, but they can also come from System Restore points. When Windows 7 creates a System Restore point, it will sometimes contain your personal files. Previous Versions allows you to extract these personal files from restore points. This only applies to Windows 7. On Windows 8, System Restore won’t create backup copies of your personal files. The Previous Versions feature was removed on Windows 8. File History Windows 8 replaced Windows 7′s backup tools with File History, although this feature isn’t enabled by default. File History is designed to be a simple, easy way to create backups of your data files on an external drive or network location. File History replaces both Windows 7′s Backup and Previous Versions features. Windows System Restore won’t create copies of personal files on Windows 8. This means you can’t actually recover older versions of files until you enable File History yourself — it isn’t enabled by default. System Image Backups Windows also allows you to create system image backups. These are backup images of your entire operating system, including your system files, installed programs, and personal files. This feature was included in both Windows 7 and Windows 8, but it was hidden in the preview versions of Windows 8.1. After many user complaints, it was restored and is still available in the final version of Windows 8.1 — click System Image Backup on the File History Control Panel. Storage Space Mirroring Windows 8′s Storage Spaces feature allows you to set up RAID-like features in software. For example, you can use Storage Space to set up two hard disks of the same size in a mirroring configuration. They’ll appear as a single drive in Windows. When you write to this virtual drive, the files will be saved to both physical drives. If one drive fails, your files will still be available on the other drive. This isn’t a good long-term backup solution, but it is a way of ensuring you won’t lose important files if a single drive fails. Microsoft Account Settings Backup Windows 8 and 8.1 allow you to back up a variety of system settings — including personalization, desktop, and input settings. If you’re signing in with a Microsoft account, OneDrive settings backup is enabled automatically. This feature can be controlled under OneDrive > Sync settings in the PC settings app. This feature only backs up a few settings. It’s really more of a way to sync settings between devices. OneDrive Cloud Storage Microsoft hasn’t been talking much about File History since Windows 8 was released. That’s because they want people to use OneDrive instead. OneDrive — formerly known as SkyDrive — was added to the Windows desktop in Windows 8.1. Save your files here and they’ll be stored online tied to your Microsoft account. You can then sign in on any other computer, smartphone, tablet, or even via the web and access your files. Microsoft wants typical PC users “backing up” their files with OneDrive so they’ll be available on any device. You don’t have to worry about all these features. Just choose a backup strategy to ensure your files are safe if your computer’s hard disk fails you. Whether it’s an integrated backup tool or a third-party backup application, be sure to back up your files.

    Read the article

  • How to Reduce the Size of Your WinSXS Folder on Windows 7 or 8

    - by Chris Hoffman
    The WinSXS folder at C:\Windows\WinSXS is massive and continues to grow the longer you have Windows installed. This folder builds up unnecessary files over time, such as old versions of system components. This folder also contains files for uninstalled, disabled Windows components. Even if you don’t have a Windows component installed, it will be present in your WinSXS folder, taking up space. Why the WinSXS Folder Gets to Big The WinSXS folder contains all Windows system components. In fact, component files elsewhere in Windows are just links to files contained in the WinSXS folder. The WinSXS folder contains every operating system file. When Windows installs updates, it drops the new Windows component in the WinSXS folder and keeps the old component in the WinSXS folder. This means that every Windows Update you install increases the size of your WinSXS folder. This allows you to uninstall operating system updates from the Control Panel, which can be useful in the case of a buggy update — but it’s a feature that’s rarely used. Windows 7 dealt with this by including a feature that allows Windows to clean up old Windows update files after you install a new Windows service pack. The idea was that the system could be cleaned up regularly along with service packs. However, Windows 7 only saw one service pack — Service Pack 1 — released in 2010. Microsoft has no intention of launching another. This means that, for more than three years, Windows update uninstallation files have been building up on Windows 7 systems and couldn’t be easily removed. Clean Up Update Files To fix this problem, Microsoft recently backported a feature from Windows 8 to Windows 7. They did this without much fanfare — it was rolled out in a typical minor operating system update, the kind that don’t generally add new features. To clean up such update files, open the Disk Cleanup wizard (tap the Windows key, type “disk cleanup” into the Start menu, and press Enter). Click the Clean up System Files button, enable the Windows Update Cleanup option and click OK. If you’ve been using your Windows 7 system for a few years, you’ll likely be able to free several gigabytes of space. The next time you reboot after doing this, Windows will take a few minutes to clean up system files before you can log in and use your desktop. If you don’t see this feature in the Disk Cleanup window, you’re likely behind on your updates — install the latest updates from Windows Update. Windows 8 and 8.1 include built-in features that do this automatically. In fact, there’s a StartComponentCleanup scheduled task included with Windows that will automatically run in the background, cleaning up components 30 days after you’ve installed them. This 30-day period gives you time to uninstall an update if it causes problems. If you’d like to manually clean up updates, you can also use the Windows Update Cleanup option in the Disk Usage window, just as you can on Windows 7. (To open it, tap the Windows key, type “disk cleanup” to perform a search, and click the “Free up disk space by removing unnecessary files” shortcut that appears.) Windows 8.1 gives you more options, allowing you to forcibly remove all previous versions of uninstalled components, even ones that haven’t been around for more than 30 days. These commands must be run in an elevated Command Prompt — in other words, start the Command Prompt window as Administrator. For example, the following command will uninstall all previous versions of components without the scheduled task’s 30-day grace period: DISM.exe /online /Cleanup-Image /StartComponentCleanup The following command will remove files needed for uninstallation of service packs. You won’t be able to uninstall any currently installed service packs after running this command: DISM.exe /online /Cleanup-Image /SPSuperseded The following command will remove all old versions of every component. You won’t be able to uninstall any currently installed service packs or updates after this completes: DISM.exe /online /Cleanup-Image /StartComponentCleanup /ResetBase Remove Features on Demand Modern versions of Windows allow you to enable or disable Windows features on demand. You’ll find a list of these features in the Windows Features window you can access from the Control Panel. Even features you don’t have installed — that is, the features you see unchecked in this window — are stored on your hard drive in your WinSXS folder. If you choose to install them, they’ll be made available from your WinSXS folder. This means you won’t have to download anything or provide Windows installation media to install these features. However, these features take up space. While this shouldn’t matter on typical computers, users with extremely low amounts of storage or Windows server administrators who want to slim their Windows installs down to the smallest possible set of system files may want to get these files off their hard drives. For this reason, Windows 8 added a new option that allows you to remove these uninstalled components from the WinSXS folder entirely, freeing up space. If you choose to install the removed components later, Windows will prompt you to download the component files from Microsoft. To do this, open a Command Prompt window as Administrator. Use the following command to see the features available to you: DISM.exe /Online /English /Get-Features /Format:Table You’ll see a table of feature names and their states. To remove a feature from your system, you’d use the following command, replacing NAME with the name of the feature you want to remove. You can get the feature name you need from the table above. DISM.exe /Online /Disable-Feature /featurename:NAME /Remove If you run the /GetFeatures command again, you’ll now see that the feature has a status of “Disabled with Payload Removed” instead of just “Disabled.” That’s how you know it’s not taking up space on your computer’s hard drive. If you’re trying to slim down a Windows system as much as possible, be sure to check out our lists of ways to free up disk space on Windows and reduce the space used by system files.     

    Read the article

  • Migrate SBS 2008 with Exchange 2007 to new hardware

    - by MikeT505
    Hello, We have run out of hard disk space on our existing Small Business Server 2008 and simply wish to upgrade both of the hard drives (currently raid 1) - without too much hassle. My main concern is how to copy across the embedded version of Microsoft Exchange 2007. Is there a simple way to copy all the data across and upgrade? Or is it best to backup and do a clean install? - The difficulty is that it's the same server, so we can't replicate mailboxes for exchange. Any hints or tips welcomed!?

    Read the article

  • Use a Windows 8-Like Task Manager in Windows 7, Vista, and XP

    - by Lori Kaufman
    One of the new features in Windows 8 is the improved Task Manager, which provides access to more information and settings. If you don’t want to upgrade, there is a way you can use a simple Windows 8-like Task Manager in Windows 7, Vista, or XP. The Windows 8 Metro Task Manager does not need to be installed. Simply download the .zip file (see the download link at the end of this article), extract the files, and double-click the Windows 8 Task Manager.exe file. A window displays a list of tasks currently running with the status of each task listed. To end a task, select the task in the list and click End Task. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • The Best Tools for Enhancing and Expanding the Features of the Windows Clipboard

    - by Lori Kaufman
    The Windows clipboard is like a scratch pad used by the operating system and all running applications. When you copy or cut some text or a graphic, it is temporarily stored in the clipboard and then retrieved later when you paste the data. We’ve previously showed you how to store multiple items to the clipboard (using Clipboard Manager) in Windows, how to copy a file path to the clipboard, how to create a shortcut to clear the clipboard, and how to copy a list of files to the clipboard. There are some limitations of the Windows clipboard. Only one item can be stored at a time. Each time you copy something, the current item in the clipboard is replaced. The data on the clipboard also cannot be viewed without pasting it into an application. In addition, the data on the clipboard is cleared when you log out of your Windows session. NOTE: The above image shows the clipboard viewer from Windows XP (clipbrd.exe), which is not available in Windows 7 or Vista. However, you can download the file from deviantART and run it to view the current entry in the clipboard in Windows 7. Here are some additional useful tools that help enhance or expand the features of the Windows clipboard and make it more useful. Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked

    Read the article

  • Server 2012 DFS New Member Issue

    - by David
    I am trying to add a new member to our DFS topology. We have 3 DCs (VMs - VMware) running Windows server 2012, two servers are located in or Primary site and the third at our DR site. Currently the two servers at our primary site are currently replicating DFS (full mesh) and are working fine. I have tried several times to add the third DC to our DFS topology, every time i configure the replication path e.g E:\MSI and click ok the MMC snap in crashes. Below is the crash info, any idea what is causing this? What i am doing is fairly straight forward and don't see why this would be happening. Windows Crash Error: gnature: Problem Event Name: CLR20r3 Problem Signature 01: mmc.exe Problem Signature 02: 6.2.9200.16496 Problem Signature 03: 50ece2e8 Problem Signature 04: System.Windows.Forms Problem Signature 05: 4.0.30319.18046 Problem Signature 06: 51552cda Problem Signature 07: 6291 Problem Signature 08: 25 Problem Signature 09: RML5K4UDBMA5NI04CIYRWVDHKEWFDHCV OS Version: 6.2.9200.2.0.0.272.7 Locale ID: 3081 Additional Information 1: b979 Additional Information 2: b97911c958b3d076b53a1d80c1c56088 Additional Information 3: 4fee Additional Information 4: 4fee5b9baabd694859b15dfc5e1863b7      Crash Report Version=1 EventType=CLR20r3 EventTime=130165974300817209 ReportType=2 Consent=1 ReportIdentifier=d15d0d38-dd36-11e2-93fb-005056af764c IntegratorReportIdentifier=d15d0d37-dd36-11e2-93fb-005056af764c NsAppName=mmc.exe Response.type=4 Sig[0].Name=Problem Signature 01 Sig[0].Value=mmc.exe Sig[1].Name=Problem Signature 02 Sig[1].Value=6.2.9200.16496 Sig[2].Name=Problem Signature 03 Sig[2].Value=50ece2e8 Sig[3].Name=Problem Signature 04 Sig[3].Value=System.Windows.Forms Sig[4].Name=Problem Signature 05 Sig[4].Value=4.0.30319.18046 Sig[5].Name=Problem Signature 06 Sig[5].Value=51552cda Sig[6].Name=Problem Signature 07 Sig[6].Value=6291 Sig[7].Name=Problem Signature 08 Sig[7].Value=25 Sig[8].Name=Problem Signature 09 Sig[8].Value=RML5K4UDBMA5NI04CIYRWVDHKEWFDHCV DynamicSig[1].Name=OS Version DynamicSig[1].Value=6.2.9200.2.0.0.272.7 DynamicSig[2].Name=Locale ID DynamicSig[2].Value=3081 DynamicSig[22].Name=Additional Information 1 DynamicSig[22].Value=b979 DynamicSig[23].Name=Additional Information 2 DynamicSig[23].Value=b97911c958b3d076b53a1d80c1c56088 DynamicSig[24].Name=Additional Information 3 DynamicSig[24].Value=4fee DynamicSig[25].Name=Additional Information 4 DynamicSig[25].Value=4fee5b9baabd694859b15dfc5e1863b7 UI[2]=C:\Windows\system32\mmc.exe UI[3]=Microsoft Management Console has stopped working UI[4]=Windows can check online for a solution to the problem. UI[5]=Check online for a solution and close the program UI[6]=Check online for a solution later and close the program UI[7]=Close the program LoadedModule[0]=C:\Windows\system32\mmc.exe LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll LoadedModule[2]=C:\Windows\system32\KERNEL32.DLL LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll LoadedModule[4]=C:\Windows\system32\GDI32.dll LoadedModule[5]=C:\Windows\system32\USER32.dll LoadedModule[6]=C:\Windows\system32\MFC42u.dll LoadedModule[7]=C:\Windows\system32\msvcrt.dll LoadedModule[8]=C:\Windows\system32\mmcbase.DLL LoadedModule[9]=C:\Windows\system32\ole32.dll LoadedModule[10]=C:\Windows\system32\SHLWAPI.dll LoadedModule[11]=C:\Windows\system32\UxTheme.dll LoadedModule[12]=C:\Windows\system32\DUser.dll LoadedModule[13]=C:\Windows\system32\OLEAUT32.dll LoadedModule[14]=C:\Windows\system32\ODBC32.dll LoadedModule[15]=C:\Windows\SYSTEM32\combase.dll LoadedModule[16]=C:\Windows\system32\RPCRT4.dll LoadedModule[17]=C:\Windows\SYSTEM32\sechost.dll LoadedModule[18]=C:\Windows\system32\ADVAPI32.dll LoadedModule[19]=C:\Windows\system32\SHCORE.DLL LoadedModule[20]=C:\Windows\system32\IMM32.DLL LoadedModule[21]=C:\Windows\system32\MSCTF.dll LoadedModule[22]=C:\Windows\system32\DUI70.dll LoadedModule[23]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9200.16579_none_418ab7ef718b27ef\Comctl32.dll LoadedModule[24]=C:\Windows\system32\SHELL32.dll LoadedModule[25]=C:\Windows\system32\CRYPTBASE.dll LoadedModule[26]=C:\Windows\system32\bcryptPrimitives.dll LoadedModule[27]=C:\Windows\system32\urlmon.dll LoadedModule[28]=C:\Windows\system32\iertutil.dll LoadedModule[29]=C:\Windows\system32\WININET.dll LoadedModule[30]=C:\Windows\SYSTEM32\clbcatq.dll LoadedModule[31]=C:\Windows\system32\mmcndmgr.dll LoadedModule[32]=C:\Windows\System32\msxml6.dll LoadedModule[33]=C:\Windows\system32\profapi.dll LoadedModule[34]=C:\Windows\system32\apphelp.dll LoadedModule[35]=C:\Windows\system32\dwmapi.dll LoadedModule[36]=C:\Windows\System32\oleacc.dll LoadedModule[37]=C:\Windows\system32\CRYPTSP.dll LoadedModule[38]=C:\Windows\system32\rsaenh.dll LoadedModule[39]=C:\Windows\system32\NetworkExplorer.dll LoadedModule[40]=C:\Windows\system32\PROPSYS.dll LoadedModule[41]=C:\Windows\system32\SETUPAPI.dll LoadedModule[42]=C:\Windows\system32\CFGMGR32.dll LoadedModule[43]=C:\Windows\system32\DEVOBJ.dll LoadedModule[44]=C:\Windows\system32\mlang.dll LoadedModule[45]=C:\Windows\system32\xmllite.dll LoadedModule[46]=C:\Windows\system32\VERSION.dll LoadedModule[47]=C:\Windows\SYSTEM32\mscoree.dll LoadedModule[48]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscoreei.dll LoadedModule[49]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll LoadedModule[50]=C:\Windows\SYSTEM32\MSVCR110_CLR0400.dll LoadedModule[51]=C:\Windows\assembly\NativeImages_v4.0.30319_64\mscorlib\fa44d07a6b592198dfeae841489f295b\mscorlib.ni.dll LoadedModule[52]=C:\Windows\system32\sxs.dll LoadedModule[53]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System\577825eedb03a45fd7327050e85d0c44\System.ni.dll LoadedModule[54]=C:\Windows\assembly\NativeImages_v4.0.30319_64\MMCEx\9b714b187bfb304526df6d4e6160e15c\MMCEx.ni.dll LoadedModule[55]=C:\Windows\assembly\NativeImages_v4.0.30319_64\MMCFxCommon\3804721e3998fdf29b06e86bcfe92eb8\MMCFxCommon.ni.dll LoadedModule[56]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Configuration\e3873005e8829578178618d41d012849\System.Configuration.ni.dll LoadedModule[57]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Xml\aea95442f7e98cffc3c849fe3b0658d6\System.Xml.ni.dll LoadedModule[58]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Drawing\f28da0d8140095c5c86e9f2443878807\System.Drawing.ni.dll LoadedModule[59]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Windows.Forms\c2f5f2174cecd9faaf74a0cdeebfdd49\System.Windows.Forms.ni.dll LoadedModule[60]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\diasymreader.dll LoadedModule[61]=C:\Windows\assembly\NativeImages_v4.0.30319_64\Microsoft.Mff1be75b#\3c16df28b2935a005a7fd0da96e0ff6c\Microsoft.ManagementConsole.ni.dll LoadedModule[62]=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clrjit.dll LoadedModule[63]=C:\Windows\assembly\NativeImages_v4.0.30319_64\DfsMgmt\ed2ebd5dc4469285040f2e21c5e990dc\DfsMgmt.ni.dll LoadedModule[64]=C:\Windows\assembly\NativeImages_v4.0.30319_64\DfsObjectModel\43ed7ca19e7c26cbf27c5c8a2e0fec93\DfsObjectModel.ni.dll LoadedModule[65]=C:\Windows\assembly\NativeImages_v4.0.30319_64\CfsCommonUIFx\aea54a98ed63ebeaa6703e9f0a724ac8\CfsCommonUIFx.ni.dll LoadedModule[66]=C:\Windows\assembly\NativeImages_v4.0.30319_64\Interop.DFSRHelper\3780b83ee96c137664d8807e7042768f\Interop.DFSRHelper.ni.dll LoadedModule[67]=C:\Windows\system32\WindowsCodecs.dll LoadedModule[68]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.9200.16384_none_7762d5fd3178b04e\comctl32.dll LoadedModule[69]=C:\Windows\WinSxS\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.9200.16518_none_726fbfe0cc22f012\gdiplus.dll LoadedModule[70]=C:\Windows\system32\DWrite.dll LoadedModule[71]=C:\Windows\system32\COMDLG32.dll LoadedModule[72]=C:\Windows\system32\Netapi32.dll LoadedModule[73]=C:\Windows\system32\netutils.dll LoadedModule[74]=C:\Windows\system32\srvcli.dll LoadedModule[75]=C:\Windows\system32\wkscli.dll LoadedModule[76]=C:\Windows\system32\clusapi.dll LoadedModule[77]=C:\Windows\system32\cryptdll.dll LoadedModule[78]=C:\Windows\system32\WS2_32.dll LoadedModule[79]=C:\Windows\system32\NSI.dll LoadedModule[80]=C:\Windows\system32\mswsock.dll LoadedModule[81]=C:\Windows\system32\DNSAPI.dll LoadedModule[82]=C:\Windows\System32\rasadhlp.dll LoadedModule[83]=C:\Windows\system32\IPHLPAPI.DLL LoadedModule[84]=C:\Windows\system32\WINNSI.DLL LoadedModule[85]=C:\Windows\System32\fwpuclnt.dll LoadedModule[86]=C:\Windows\system32\DFSCLI.DLL LoadedModule[87]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Dired13b18a9#\0acd265b442254788d2d1429c296558c\System.DirectoryServices.ni.dll LoadedModule[88]=C:\Windows\system32\ntdsapi.dll LoadedModule[89]=C:\Windows\system32\LOGONCLI.DLL LoadedModule[90]=C:\Windows\system32\activeds.dll LoadedModule[91]=C:\Windows\system32\adsldpc.dll LoadedModule[92]=C:\Windows\system32\WLDAP32.dll LoadedModule[93]=C:\Windows\system32\adsldp.dll LoadedModule[94]=C:\Windows\system32\SspiCli.dll LoadedModule[95]=C:\Windows\system32\DSPARSE.dll LoadedModule[96]=C:\Windows\system32\msv1_0.DLL LoadedModule[97]=C:\Windows\system32\cscapi.dll LoadedModule[98]=C:\Windows\system32\DSROLE.DLL LoadedModule[99]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Dire5d62f0a2#\819205bfacb57978948171e414993369\System.DirectoryServices.Protocols.ni.dll LoadedModule[100]=C:\Windows\System32\objsel.dll LoadedModule[101]=C:\Windows\System32\Secur32.dll LoadedModule[102]=C:\Windows\System32\credui.dll LoadedModule[103]=C:\Windows\system32\CRYPT32.dll LoadedModule[104]=C:\Windows\system32\MSASN1.dll LoadedModule[105]=C:\Windows\System32\DPAPI.DLL LoadedModule[106]=C:\Windows\system32\riched32.dll LoadedModule[107]=C:\Windows\system32\RICHED20.dll LoadedModule[108]=C:\Windows\system32\USP10.dll LoadedModule[109]=C:\Windows\system32\msls31.dll LoadedModule[110]=C:\Windows\System32\Windows.Globalization.dll LoadedModule[111]=C:\Windows\System32\Bcp47Langs.dll LoadedModule[112]=C:\Windows\assembly\NativeImages_v4.0.30319_64\System.Serv759bfb78#\e44b9230fcc7dc263820eff07cfc6353\System.ServiceProcess.ni.dll LoadedModule[113]=C:\Windows\system32\kerberos.DLL LoadedModule[114]=C:\Windows\system32\bcrypt.dll LoadedModule[115]=C:\Windows\assembly\NativeImages_v4.0.30319_64\Accessibility\e69795104b16b74fe9c1e7dff4f3f510\Accessibility.ni.dll LoadedModule[116]=C:\Windows\system32\MPR.dll LoadedModule[117]=C:\Windows\System32\drprov.dll LoadedModule[118]=C:\Windows\System32\WINSTA.dll LoadedModule[119]=C:\Windows\System32\ntlanman.dll LoadedModule[120]=C:\Windows\system32\explorerframe.dll FriendlyEventName=Stopped working ConsentKey=CLR20r3 AppName=Microsoft Management Console AppPath=C:\Windows\system32\mmc.exe NsPartner=windows NsGroup=windows8 Application Log Event ID: 1000 Faulting application name: mmc.exe, version: 6.2.9200.16496, time stamp: 0x50ece2e8 Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6 Exception code: 0xe0434352 Fault offset: 0x000000000003811c Faulting process id: 0xd30 Faulting application start time: 0x01ce71411a7b775b Faulting application path: C:\Windows\system32\mmc.exe Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: d15d0d37-dd36-11e2-93fb-005056af764c Faulting package full name: Faulting package-relative application ID: Application Log Event ID: 1026 Application: mmc.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.Runtime.InteropServices.SEHException Stack: at System.Windows.Forms.UnsafeNativeMethods.ThemingScope.DeactivateActCtx(Int32 dwFlags, IntPtr lpCookie) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run() at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart() at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object) at System.Threading.ThreadHelper.ThreadStart()

    Read the article

  • Windows SBS 2008 to Windows Server 2012 migration

    - by StefanGrech
    I am in the process of upgrading my Windows SBS 2008 server running Exchange, Active Directory and as a File server to Windows Server 2012 essentials. Now I know that Windows Server 2012 essentials does not have exchange, thus I was looking to migrate the Active directory and the file server to Windows Server 2012 essentials, Then I would have a separate Virtual machine running Windows server 2012 standard with Exchange 2013. Now my question is, what should I do first? Migrate the AD and File server to Windows 2012 essentials and then after the migration is finished, I create a local move of the mailboxes from SBS 2008 to Windows Server 2012 standard running exchange 2013? or should this be the other way round?

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >