Search Results

Search found 65648 results on 2626 pages for 'windows xp mode'.

Page 1/2626 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Installing the Updated XP Mode which Requires no Hardware Virtualization

    - by Mysticgeek
    Good news for those of you who have a computer without Hardware Virtualization, Microsoft had dropped the requirement so you can now run XP Mode on your machine. Here we take a look at how to install it and getting working on your PC. Microsoft has dropped the requirement that your CPU supports Hardware Virtualization for XP Mode in Windows 7. Before this requirement was dropped, we showed you how to use SecureAble to find out if your machine would run XP Mode. If it couldn’t, you might have gotten lucky with turning Hardware Virtualization on in your BIOS, or getting an update that would enable it. If not, you were out of luck or would need a different machine. Note: Although you no longer need Hardware Virtualization, you still need Professional, Enterprise, or Ultimate version of Windows 7. Download Correct Version of XP Mode For this article we’re installing it on a Dell machine that doesn’t support Hardware Virtualization on Windows 7 Ultimate 64-bit version. The first thing you’ll want to do is go to the XP Mode website and select your edition of Windows 7 and language. Then there are three downloads you’ll need to get from the page. Windows XP Mode, Windows Virtual PC, and the Windows XP Mode Update (All Links Below). Windows genuine validation is required before you can download the XP Mode files. To make the validation process easier you might want to use IE when downloading these files and validating your version of Windows. Installing XP Mode After validation is successful the first thing to download and install is XP Mode, which is easy following the wizard and accepting the defaults. The second step is to install KB958559 which is Windows Virtual PC.   After it’s installed, a reboot is required. After you’ve come back from the restart, you’ll need to install KB977206 which is the Windows XP Mode Update.   After that’s installed, yet another restart of your system is required. After the update is configured and you return from the second reboot, you’ll find XP Mode in the Start menu under the Windows Virtual PC folder. When it launches accept the license agreement and click Next. Enter in your log in credentials… Choose if you want Automatic Updates or not… Then you’re given a message saying setup will share the hardware on your computer, then click Start Setup. While setup completes, you’re shown a display of what XP Mode does and how to use it. XP Mode launches and you can now begin using it to run older applications that are not compatible with Windows 7. Conclusion This is a welcome news for many who want the ability to use XP Mode but didn’t have the proper hardware to do it. The bad news is users of Home versions of Windows still don’t get to enjoy the XP Mode feature officially. However, we have an article that shows a great workaround – Create an XP Mode for Windows 7 Home Versions & Vista. Download XP Mode, Windows Virtual PC, and Windows XP Mode Update Similar Articles Productive Geek Tips Our Look at XP Mode in Windows 7Run XP Mode on Windows 7 Machines Without Hardware VirtualizationInstall XP Mode with VirtualBox Using the VMLite PluginUnderstanding the New Hyper-V Feature in Windows Server 2008How To Run XP Mode in VirtualBox on Windows 7 (sort of) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer

    Read the article

  • Windows 7 Phone Database Rapid Repository – V2.0 Beta Released

    - by SeanMcAlinden
    Hi All, A V2.0 beta has been released for the Windows 7 Phone database Rapid Repository, this can be downloaded at the following: http://rapidrepository.codeplex.com/ Along with the new View feature which greatly enhances querying and performance, various bugs have been fixed including a more serious bug with the caching that caused the GetAll() method to sometimes return inconsistent results (I’m a little bit embarrased by this bug). If you are currently using V1.0 in development, I would recommend swapping in the beta immediately. A full release will be available very shortly, I just need a few more days of testing and some input from other users/testers.   *Breaking Changes* The only real change is the RapidContext has moved under the main RapidRepository namespace. Various internal methods have been actually made ‘internal’ and replaced with a more friendly API (I imagine not many users will notice this change). Hope you like it Kind Regards, Sean McAlinden

    Read the article

  • Windows 7 Phone Database – Querying with Views and Filters

    - by SeanMcAlinden
    I’ve just added a feature to Rapid Repository to greatly improve how the Windows 7 Phone Database is queried for performance (This is in the trunk not in Release V1.0). The main concept behind it is to create a View Model class which would have only the minimum data you need for a page. This View Model is then stored and retrieved rather than the whole list of entities. Another feature of the views is that they can be pre-filtered to even further improve performance when querying. You can download the source from the Microsoft Codeplex site http://rapidrepository.codeplex.com/. Setting up a view Lets say you have an entity that stores lots of data about a game result for example: GameScore entity public class GameScore : IRapidEntity {     public Guid Id { get; set; }     public string GamerId {get;set;}     public string Name { get; set; }     public Double Score { get; set; }     public Byte[] ThumbnailAvatar { get; set; }     public DateTime DateAdded { get; set; } }   On your page you want to display a list of scores but you only want to display the score and the date added, you create a View Model for displaying just those properties. GameScoreView public class GameScoreView : IRapidView {     public Guid Id { get; set; }     public Double Score { get; set; }     public DateTime DateAdded { get; set; } }   Now you have the view model, the first thing to do is set up the view at application start up. This is done using the following syntax. View Setup public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score }); } As you can see, using a little bit of lambda syntax, you put in the code for constructing a single view, this is used internally for mapping an entity to a view. *Note* you do not need to map the Id property, this is done automatically, a view model id will always be the same as it’s corresponding entity.   Adding Filters One of the cool features of the view is that you can add filters to limit the amount of data stored in the view, this will dramatically improve performance. You can add multiple filters using the fluent syntax if required. In this example, lets say that you will only ever show the scores for the last 10 days, you could add a filter like the following: Add single filter public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score })         .AddFilter(x => x.DateAdded > DateTime.Now.AddDays(-10)); } If you wanted to further limit the data, you could also say only scores above 100: Add multiple filters public MainPage() {     RapidRepository<GameScore>.AddView<GameScoreView>(x => new GameScoreView { DateAdded = x.DateAdded, Score = x.Score })         .AddFilter(x => x.DateAdded > DateTime.Now.AddDays(-10))         .AddFilter(x => x.Score > 100); }   Querying the view model So the important part is how to query the data. This is done using the repository, there is a method called Query which accepts the type of view as a generic parameter (you can have multiple View Model types per entity type) You can either use the result of the query method directly or perform further querying on the result is required. Querying the View public void DisplayScores() {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     List<GameScoreView> scores = repository.Query<GameScoreView>();       // display logic } Further Filtering public void TodaysScores() {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     List<GameScoreView> todaysScores = repository.Query<GameScoreView>().Where(x => x.DateAdded > DateTime.Now.AddDays(-1)).ToList();       // display logic }   Retrieving the actual entity Retrieving the actual entity can be done easily by using the GetById method on the repository. Say for example you allow the user to click on a specific score to get further information, you can use the Id populated in the returned View Model GameScoreView and use it directly on the repository to retrieve the full entity. Get Full Entity public void GetFullEntity(Guid gameScoreViewId) {     RapidRepository<GameScore> repository = new RapidRepository<GameScore>();     GameScore fullEntity = repository.GetById(gameScoreViewId);       // display logic } Synchronising The View If you are upgrading from Rapid Repository V1.0 and are likely to have data in the repository already, you will need to perform a synchronisation to ensure the views and entities are fully in sync. You can either do this as a one off during the application upgrade or if you are a little more cautious, you could run this at each application start up. Synchronise the view public void MyUpgradeTasks() {     RapidRepository<GameScore>.SynchroniseView<GameScoreView>(); } It’s worth noting that in normal operation, the view keeps itself in sync with the entities so this is only really required if you are upgrading from V1.0 to V2.0 when it gets released shortly.   Summary I really hope you like this feature, it will be great for performance and I believe supports good practice by promoting the use of View Models for specific pages. I’m hoping to produce a beta for this over the next few days, I just want to add some more tests and hopefully iron out any bugs. I would really appreciate any thoughts on this feature and would really love to know of any bugs you find. You can download the source from the following : http://rapidrepository.codeplex.com/ Kind Regards, Sean McAlinden.

    Read the article

  • Easily Tweak Windows 7 and Vista by Adding Tabs to Explorer, Creating Context Menu Entries, and More

    - by Lori Kaufman
    7Plus is a very useful, free tool for Windows 7 and Vista that adds a lot of features to Windows, such as the ability to add tabs to Windows Explorer, set up hotkeys for common tasks, and other settings to make working with Windows easier. 7Plus is powered by AutoHotkey and allows most of the features to be fully customized. You can also create your own features by creating custom events. 7Plus does not need to be installed. Simply extract the files from the .zip file you downloaded (see the link at the end of this article) and double-click on the 7plus.exe file. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • How To Run XP Mode in VirtualBox on Windows 7 (sort of)

    - by Matthew Guay
    A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • How To Run XP Mode in VirtualBox on Windows 7 (sort of)

    - by Matthew Guay
    A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Install XP Mode with VirtualBox Using the VMLite Plugin

    - by Mysticgeek
    Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Install XP Mode with VirtualBox Using the VMLite Plugin

    - by Mysticgeek
    Would you like to run XP Mode, but prefer Sun’s VirtualBox for virtualization?  Thanks to the free VMLite plugin, you can quickly and easily run XP Mode in or alongside VirtualBox. Yesterday we showed you one method to install XP Mode in VirtualBox, unfortunately in that situation you lose XP’s activation, and it isn’t possible to reactivate it. Today we show you a tried and true method for running XP mode in VirtualBox and integrating it seamlessly with Windows 7. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. Install XP Mode Make sure you’re logged in with Administrator rights for the entire process. The first thing you’ll want to do is install XP Mode on your system (link below). You don’t need to install Windows Virtual PC. Go through and install XP Mode using the defaults. Install VirtualBox Next you’ll need to install VirtualBox 3.1.2 or higher if it isn’t installed already. If you have an older version of VirtualBox installed, make sure to update it. During setup you’re notified that your network connection will be reset. Check the box next to Always trust software from “Sun Microsystems, Inc.” then click Install.   Setup only takes a couple of minutes, and does not require a reboot…which is always nice. Install VMLite XP Mode Plugin The next thing we’ll need to install is the VMLite XP Mode Plugin. Again Installation is simple following the install wizard. During the install like with VirtualBox you’ll be asked to install the device software. After it’s installed go to the Start menu and run VMLite Wizard as Administrator. Select the location of the XP Mode Package which by default should be in C:\Program Files\Windows XP Mode. Accept the EULA…and notice that it’s meant for Windows 7 Professional, Enterprise, and Ultimate editions. Next, name the machine, choose the install folder, and type in a password. Select if you want Automatic Updates turned on or not. Wait while the process completes then click Finish.   The VMLite XP Mode will set up to run the first time. That is all there is to this section. You can run XP Mode from within the VMLite Workstation right away. XP Mode is fully activated already, and the Guest Additions are already installed, so there’s nothing else you need to do!  XP Mode is the whole way ready to use. Integration with VirtualBox Since we installed the VMLite Plugin, when you open VirtualBox you’ll see it listed as one of your machines and you can start it up from here.   Here we see VMLite XP Mode running in Sun VirtualBox. Integrate with Windows 7 To integrate it with Windows 7 click on Machine \ Seamless Mode…   Here you can see the XP menu and Taskbar will be placed on top of Windows 7. From here you can access what you need from XP Mode.   Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. This works so seamlessly you forget if your working in XP or Windows 7. In this example we have Windows Home Server Console running in Windows 7, while installing MSE from IE 6 in XP Mode. At the top of the screen you will still have access to the VMs controls.   You can click the button to exit Seamless Mode, or simply hit the right “CTRL+L” Conclusion This is a very slick way to run XP Mode in VirtualBox on any machine that doesn’t have Hardware Virtualization. This method also doesn’t lose the XP Mode activation and is actually extremely easy to set up. If you prefer VMware (like we do), Check out how to run XP Mode on machines without Hardware Virtualization capability, and also how to create an XP Mode for Vista and Windows 7 Home Premium. Links Download XP Mode Download VirtualBox Download VMLite XP Mode Plugin for VirtualBox (Site Registration Required) Similar Articles Productive Geek Tips Search for Install Packages from the Ubuntu Command LineHow To Run XP Mode in VirtualBox on Windows 7 (sort of)Install and Use the VLC Media Player on Ubuntu LinuxInstall Monodevelop on Ubuntu LinuxInstall Flash Plugin Manually in Firefox on Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Minimize Windows Live Mail to the System Tray in Windows 7

    - by Asian Angel
    Are you frustrated that you can not minimize Windows Live Mail to the system tray in Windows 7? With just a few tweaks you can make Live Mail minimize to the system tray just like in earlier versions of Windows. Windows Live Mail in Windows Vista In Windows Vista you could minimize Windows Live Mail to the system tray if desired using the context menu… Windows Live Mail in Windows 7 In Windows 7 you can minimize the app window but not hide it in the system tray. The Hide window when minimized menu entry is missing from the context menu and all you have is the window icon taking up space in your taskbar. How to Add the Context Menu Entry Back Right click on the program shortcut(s) and select properties. When the properties window opens click on the compatibility tab and enable the Run this program in compatibility mode for setting. Choose Windows Vista (Service Pack 2) from the drop-down menu and click OK. Once you have restarted Windows Live Mail you will have access to the Hide window when minimized menu entry again. And just like that your taskbar is clear again when Windows Live Mail is minimized. If you have wanted the ability to minimize Windows Live Mail to the system tray in Windows 7 then this little tweak will fix the problem. Similar Articles Productive Geek Tips Make Windows Live Messenger Minimize to the System Tray in Windows 7Move Live Messenger Icon to the System Tray in Windows 7Backup Windows Mail Messages and Contacts in VistaTurn off New Mail Notification for PocoMail Junk Mail FolderPut Your PuTTY in the System Tray TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

    Read the article

  • Stupid Geek Tricks: How to Perform Date Calculations in Windows Calculator

    - by Usman
    Would you like to know how many days old are you today? Can you tell what will be the date 78 days from now? How many days are left till Christmas? How many days have passed since your last birthday? All these questions have their answers hidden within Windows! Curious? Keep reading to see how you can answer these questions in an instant using Windows’ built-in utility called ‘Calculator’. No, no. This isn’t a guide to show you how to perform basic calculations on calculator. This is an application of a unique feature in the Calculator application in Windows, and the feature is called Date Calculation. Most of us don’t really use the Windows’ Calculator that much, and when we do, it’s only for an instant (to do small calculations). However, it is packed with some really interesting features, so lets go ahead and see how Date Calculation works. To start, open Calculator by pressing the winkey, and type calcul… (it should’ve popped up by now, if not, you can type the rest of the ‘…ator’ as well just to be sure). Open it. And by the way, this date calculation function works in both Windows 7 and 8. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

    Read the article

  • Windows XP will only boot if it has booted into safe mode, and then been restarted into normal mode, anybody ever seen this?

    - by Happy Hamster
    I have a workstation with an impressively strange problem. If you boot the computer, it will load up to the "select user account screen" and then freeze completely before I can select a user account. No mouse, keyboard, anything working. However, if you then reboot the computer into safe mode, do NOTHING, and then reboot into regular mode, it loads fine. The next time you reboot the computer, it will freeze a the login screen again. So basically to log in normally I must reboot into safe mode first every time, even though I'm not even doing anything in safe mode (I don't even need to log into a profile). Anybody ever seen anything like this?

    Read the article

  • Rapid Repository – Silverlight Development

    - by SeanMcAlinden
    Hi All, One of the questions I was recently asked was whether the Rapid Repository would work for normal Silverlight development as well as for the Windows 7 Phone. I can confirm that the current code in the trunk will definitely work for both the Windows 7 Phone and normal Silverlight development. I haven’t tested V.1.0 for compatibility but V2.0 which will be released fairly soon will work absolutely fine.   Kind Regards, Sean McAlinden.

    Read the article

  • Map a Network Drive from XP to Windows 7

    - by Mysticgeek
    We’ve received a lot of questions about mapping a drive from XP to Windows 7 to access data easily. Today we look at how to map a drive in Windows 7, and how to map to an XP drive from Windows 7. With the new Homegroup feature in Windows 7, it makes sharing data between computers a lot easier. But you might need to map a network drive so you can go directly into a folder to access its contents. Mapping a network drive may sound like “IT talk”, but the process is fairly easy. Map Network Drive in Windows 7 Note: All of the computers used in this article are part of the same workgroup on a home network. In this first example we’re mapping to another Windows 7 drive on the network. Open Computer and from the toolbar click on Map Network Drive. Alternately in Computer you can hit “Alt+T” to pull up the toolbar and click on Tools \ Map Network Drive. Now give it an available drive letter, type in the path or browse to the folder you want to map to. Check the box next to Reconnect at logon if you want it available after a reboot, and click Finish. If both machines aren’t part of the same Homegroup, you may be prompted to enter in a username and password. Make sure and check the box next to Remember my credentials if you don’t want to log in every time to access it. The drive will map and the contents of the folder will open up. When you look in Computer, you’ll see the drive under network location. This process works if you want to connect to a server drive as well. In this example we map to a Home Server drive. Map an XP Drive to Windows 7 There might be times when you need to map a drive on an XP machine on your network. There are extra steps you’ll need to take to make it work however. Here we take a look at the problem you’ll encounter when trying to map to an XP machine if things aren’t set up correctly. If you try to browse to your XP machine you’ll see a message that you don’t have permission. Or if you try to enter in the path directly, you’ll be prompted for a username and password, and the annoyance is, no matter what credentials you put in, you can’t connect. To solve the problem we need to set up the Windows 7 machine as a user on the XP machine and make them part of the Administrators group. Right-click My Computer and select Manage. Under Computer Management expand Local Users and Groups and click on the Users folder. Right-click an empty area and click New User. Add in the user credentials, uncheck User must change password at next logon, then check Password never expires then click Create. Now you see the new user you created in the list. After the user is added you might want to reboot before proceeding to the next step.   Next we need to make the user part of the Administrators group. So go back into Computer Management \ Local Users and Groups \ Groups then double click on Administrators. Click the Add button in Administrators Properties window. Enter in the new user you created and click OK. An easy way to do this is to enter the name of the user you created then click Check Names and the path will be entered in for you. Now you see the user as a member of the Administrators group. Back on the Windows 7 machine we’ll start the process of mapping a drive. Here we’re browsing to the XP Media Center Edition machine. Now we can enter in the user name and password we just created. If you only want to access specific shared folders on the XP machine you can browse to them. Or if you want to map to the entire drive, enter in the drive path where in this example it’s “\\XPMCE\C$” –Don’t forget the “$” sign after the local drive letter. Then login… Again the contents of the drive will open up for you to access. Here you can see we have two drives mapped. One to another Windows 7 machine on the network, and the other one to the XP computer.   If you ever want to disconnect a drive, just right-click on it and then Disconnect. There are several scenarios where you might want to map a drive in Windows 7 to access specific data. It takes a little bit of work but you can map to an XP drive from Windows 7 as well. This comes in handy where you have a network with different versions of Windows running on it. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPMake Vista Index Your Network ConnectionsEasily Backup & Import Your Wireless Network Settings in Windows 7Quickly Open Network Connections List in Windows 7 or VistaHow To Find Drives Easily with Desk Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

    Read the article

  • The 35 Best Tips and Tricks for Maintaining Your Windows PC

    - by Lori Kaufman
    When working (or playing) on your computer, you probably don’t think much about how you are going to clean up your files, backup your data, keep your system virus free, etc. However, these are tasks that need attention. We’ve published useful article about different aspects of maintaining your computer. Below is a list our most useful articles about maintaining your computer, operating system, software, and data. HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

    Read the article

  • Login to Windows 8 Desktop Mode Automatically with ClassicStarter [Downloads]

    - by Asian Angel
    The other day we shared a quick keyboard tip for going straight to Desktop Mode in Windows 8 when you logged in. Today we are back with a small app that gets you straight to Desktop Mode with ‘set it and forget it’ ease. You will need to install ClassicStarter after you have extracted the contents of the zip file. Once that is done simply start the app up and this is what you will see… The only thing you will need to do is click on the Classic Desktop Button. Once you have clicked on the Classic Desktop Button it will ‘grey out’. Simply exit the app, log out, and then log back into your system. The Start Screen will display for a moment or two, but everything will shift over to Desktop Mode automatically without any additional actions required on your part. To reverse the process and set the Start Screen as the default just start the app up again and click on the Metro Desktop Button, exit the app, and then log out/log back in. Download ClassicStarter (MediaFire) VirusTotal Scan Results for the ClassicStarter Zip File [via NirmalTV.com] How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

    Read the article

  • Go Directly to Desktop Mode in Windows 8 on Login (Without Installing Extra Software)

    - by Asian Angel
    A lot of people are unhappy with being forced to interact with the new Start Screen in Windows 8 first thing once they have logged into their system. But their is a quick and simple work-around to go directly to Desktop Mode that does not require installing extra software or making changes to your system. The first thing that you will need to do is make sure that the Desktop Tile is in the left uppermost position on the Start Screen as seen here. Once the tile has been moved to that position you will need to restart/reboot your system. Once your system has restarted and you are back at the Login Screen, type in your password but do NOT click on the Arrow Button or tap the Enter Key. Instead of tapping the Enter Key simply press down on it and hold it down until you see the regular desktop. Keep in mind that you may see the Start Screen become visible for just a short moment as it is being bypassed for the desktop. How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

    Read the article

  • Windows 8 / IIS 8 Concurrent Requests Limit

    - by OWScott
    IIS 8 on Windows Server 2012 doesn’t have any fixed concurrent request limit, apart from whatever limit would be reached when resources are maxed. However, the client version of IIS 8, which is on Windows 8, does have a concurrent connection request limitation to limit high traffic production uses on a client edition of Windows. Starting with IIS 7 (Windows Vista), the behavior changed from previous versions.  In previous client versions of IIS, excess requests would throw a 403.9 error message (Access Forbidden: Too many users are connected.).  Instead, Windows Vista, 7 and 8 queue excessive requests so that they will be handled gracefully, although there is a maximum number of requests that will be processed simultaneously. Thomas Deml provided a concurrent request chart for Windows Vista many years ago, but I have been unable to find an equivalent chart for Windows 8 so I asked Wade Hilmo from the IIS team what the limits are.  Since this is controlled not by the IIS team itself but rather from the Windows licensing team, he asked around and found the authoritative answer, which I’ll provide below. Windows 8 – IIS 8 Concurrent Requests Limit Windows 8 3 Windows 8 Professional 10 Windows RT N/A since IIS does not run on Windows RT Windows 7 – IIS 7.5 Concurrent Requests Limit Windows 7 Home Starter 1 Windows 7 Basic 1 Windows 7 Premium 3 Windows 7 Ultimate, Professional, Enterprise 10 Windows Vista – IIS 7 Concurrent Requests Limit Windows Vista Home Basic (IIS process activation and HTTP processing only) 3 Windows Vista Home Premium 3 Windows Vista Ultimate, Professional 10 Windows Server 2003, Windows Server 2008, Windows Server 2008 R2 and Windows Server 2012 allow an unlimited amount of simultaneously requests.

    Read the article

  • Triple boot vista xp ubuntu

    - by Artyom2033
    My partition table is pretty messed up from install/uninstall os and what I want to do now is to clear that and have vista/xp/ubuntu 12.04 on the same hard drive. I have create a new partition for xp on vista, everything was fine, but when I restarted my pc, I was getting the grub restore prompt. Even when I was trying to install xp, when the 'lunch windows' came, a wild BSOD appear. So I have deleted my partition for xp using gParted include in the 12.04 live cd. This haven't resolve the problem and I am still unable to boot in vista nor ubuntu. But I realy what this triple boot for LoL purpose (since my vista installation keep giving latency spike in this game and I hope this will not be the case in a fresh xp installation (I have tested it in ubuntu, the ping was good, but the fps wasn't). So what I want to do, is to install xp on a partition, then be able to boot on any of them without a problem from a nice installation of grub or something. gParted screenshot Thanks for help. Sorry for my English.

    Read the article

  • Complete Guide to Networking Windows 7 with XP and Vista

    - by Mysticgeek
    Since there are three versions of Windows out in the field these days, chances are you need to share data between them. Today we show how to get each version to be share files and printers with one another. In a perfect world, getting your computers with different Microsoft operating systems to network would be as easy as clicking a button. With the Windows 7 Homegroup feature, it’s almost that easy. However, getting all three of them to communicate with each other can be a bit of a challenge. Today we’ve put together a guide that will help you share files and printers in whatever scenario of the three versions you might encounter on your home network. Sharing Between Windows 7 and XP The most common scenario you’re probably going to run into is sharing between Windows 7 and XP.  Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. The biggest problem you may run into is finding the correct printer drivers for both versions of Windows. Share Files and Printers Between Windows 7 & XP  Map a Network Drive Another method of sharing data between XP and Windows 7 is mapping a network drive. If you don’t need to share a printer and only want to share a drive, then you can just map an XP drive to Windows 7. Although it might sound complicated, the process is not bad. The trickiest part is making sure you add the appropriate local user. This will allow you to share the contents of an XP drive to your Windows 7 computer. Map a Network Drive from XP to Windows 7 Sharing between Vista and Windows 7 Another scenario you might run into is having to share files and printers between a Vista and Windows 7 machine. The process is a bit easier than sharing between XP and Windows 7, but takes a bit of work. The Homegroup feature isn’t compatible with Vista, so we need to go through a few different steps. Depending on what your printer is, sharing it should be easier as Vista and Windows 7 do a much better job of automatically locating the drivers. How to Share Files and Printers Between Windows 7 and Vista Sharing between Vista and XP When Windows Vista came out, hardware requirements were intensive, drivers weren’t ready, and sharing between them was complicated due to the new Vista structure. The sharing process is pretty straight-forward if you’re not using password protection…as you just need to drop what you want to share into the Vista Public folder. On the other hand, sharing with password protection becomes a bit more difficult. Basically you need to add a user and set up sharing on the XP machine. But once again, we have a complete tutorial for that situation. Share Files and Folders Between Vista and XP Machines Sharing Between Windows 7 with Homegroup If you have one or more Windows 7 machine, sharing files and devices becomes extremely easy with the Homegroup feature. It’s as simple as creating a Homegroup on on machine then joining the other to it. It allows you to stream media, control what data is shared, and can also be password protected. If you don’t want to make your Windows 7 machines part of the same Homegroup, you can still share files through the Public Folder, and setup a printer to be shared as well.   Use the Homegroup Feature in Windows 7 to Share Printers and Files Create a Homegroup & Join a New Computer To It Change which Files are Shared in a Homegroup Windows Home Server If you want an ultimate setup that creates a centralized location to share files between all systems on your home network, regardless of the operating system, then set up a Windows Home Server. It allows you to centralize your important documents and digital media files on one box and provides easy access to data and the ability to stream media to other machines on your network. Not only that, but it provides easy backup of all your machines to the server, in case disaster strikes. How to Install and Setup Windows Home Server How to Manage Shared Folders on Windows Home Server Conclusion The biggest annoyance is dealing with printers that have a different set of drivers for each OS. There is no real easy way to solve this problem. Our best advice is to try to connect it to one machine, and if the drivers won’t work, hook it up to the other computer and see if that works. Each printer manufacturer is different, and Windows doesn’t always automatically install the correct drivers for the device. We hope this guide helps you share your data between whichever Microsoft OS scenario you might run into! Here are some other articles that will help you accomplish your home networking needs: Share a Printer on a Home Network from Vista or XP to Windows 7 How to Share a Folder the XP Way in Windows Vista Similar Articles Productive Geek Tips Delete Wrong AutoComplete Entries in Windows Vista MailSvchost Viewer Shows Exactly What Each svchost.exe Instance is DoingFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaShow Hidden Files and Folders in Windows 7 or VistaAdd Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

    Read the article

  • How to Assign a Static IP Address in XP, Vista, or Windows 7

    - by Mysticgeek
    When organizing your home network it’s easier to assign each computer it’s own IP address than using DHCP. Here we will take a look at doing it in XP, Vista, and Windows 7. If you have a home network with several computes and devices, it’s a good idea to assign each of them a specific address. If you use DHCP (Dynamic Host Configuration Protocol), each computer will request and be assigned an address every time it’s booted up. When you have to do troubleshooting on your network, it’s annoying going to each machine to figure out what IP they have. Using Static IPs prevents address conflicts between devices and allows you to manage them more easily. Assigning IPs to Windows is essentially the same process, but getting to where you need to be varies between each version. Windows 7 To change the computer’s IP address in Windows 7, type network and sharing into the Search box in the Start Menu and select Network and Sharing Center when it comes up.   Then when the Network and Sharing Center opens, click on Change adapter settings. Right-click on your local adapter and select Properties. In the Local Area Connection Properties window highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now select the radio button Use the following IP address and enter in the correct IP, Subnet mask, and Default gateway that corresponds with your network setup. Then enter your Preferred and Alternate DNS server addresses. Here we’re on a home network and using a simple Class C network configuration and Google DNS. Check Validate settings upon exit so Windows can find any problems with the addresses you entered. When you’re finished click OK. Now close out of the Local Area Connections Properties window. Windows 7 will run network diagnostics and verify the connection is good. Here we had no problems with it, but if you did, you could run the network troubleshooting wizard. Now you can open the command prompt and do an ipconfig  to see the network adapter settings have been successfully changed.   Windows Vista Changing your IP from DHCP to a Static address in Vista is similar to Windows 7, but getting to the correct location is a bit different. Open the Start Menu, right-click on Network, and select Properties. The Network and Sharing Center opens…click on Manage network connections. Right-click on the network adapter you want to assign an IP address and click Properties. Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You’ll need to close out of Local Area Connection Properties for the settings to go into effect. Open the Command Prompt and do an ipconfig to verify the changes were successful.   Windows XP In this example we’re using XP SP3 Media Center Edition and changing the IP address of the Wireless adapter. To set a Static IP in XP right-click on My Network Places and select Properties. Right-click on the adapter you want to set the IP for and select Properties. Highlight Internet Protocol (TCP/IP) and click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You will need to close out of the Network Connection Properties screen before the changes go into effect.   Again you can verify the settings by doing an ipconfig in the command prompt. In case you’re not sure how to do this, click on Start then Run.   In the Run box type in cmd and click OK. Then at the prompt type in ipconfig and hit Enter. This will show the IP address for the network adapter you changed.   If you have a small office or home network, assigning each computer a specific IP address makes it a lot easier to manage and troubleshoot network connection problems. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressChange Ubuntu Server from DHCP to a Static IP AddressVista Breadcrumbs for Windows XPCreate a Shortcut or Hotkey for the Safely Remove Hardware DialogCreate a Shortcut or Hotkey to Eject the CD/DVD Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

    Read the article

  • Three Ways to Access the Windows 8 Boot Options Menu

    - by Lori Kaufman
    The boot options have been consolidated in Windows 8 into a single menu, called the “boot options menu,” providing access to repair tools and options for changing Windows startup behavior, such as enabling debugging, booting into safe mode, and launching into a recovery environment. The days of pressing a function key or Esc to interrupt the boot process and get into the BIOS configuration (in UEFI enabled systems) are gone. There are three ways of accessing the new boot options menu in Windows 8 and we’ll show you how. 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

    Read the article

  • How to Use Windows’ Advanced Search Features: Everything You Need to Know

    - by Chris Hoffman
    You should never have to hunt down a lost file on modern versions of Windows — just perform a quick search. You don’t even have to wait for a cartoon dog to find your files, like on Windows XP. The Windows search indexer is constantly running in the background to make quick local searches possible. This enables the kind of powerful search features you’d use on Google or Bing — but for your local files. Controlling the Indexer By default, the Windows search indexer watches everything under your user folder — that’s C:\Users\NAME. It reads all these files, creating an index of their names, contents, and other metadata. Whenever they change, it notices and updates its index. The index allows you to quickly find a file based on the data in the index. For example, if you want to find files that contain the word “beluga,” you can perform a search for “beluga” and you’ll get a very quick response as Windows looks up the word in its search index. If Windows didn’t use an index, you’d have to sit and wait as Windows opened every file on your hard drive, looked to see if the file contained the word “beluga,” and moved on. Most people shouldn’t have to modify this indexing behavior. However, if you store your important files in other folders — maybe you store your important data a separate partition or drive, such as at D:\Data — you may want to add these folders to your index. You can also choose which types of files you want to index, force Windows to rebuild the index entirely, pause the indexing process so it won’t use any system resources, or move the index to another location to save space on your system drive. To open the Indexing Options window, tap the Windows key on your keyboard, type “index”, and click the Indexing Options shortcut that appears. Use the Modify button to control the folders that Windows indexes or the Advanced button to control other options. To prevent Windows from indexing entirely, click the Modify button and uncheck all the included locations. You could also disable the search indexer entirely from the Programs and Features window. Searching for Files You can search for files right from your Start menu on Windows 7 or Start screen on Windows 8. Just tap the Windows key and perform a search. If you wanted to find files related to Windows, you could perform a search for “Windows.” Windows would show you files that are named Windows or contain the word Windows. From here, you can just click a file to open it. On Windows 7, files are mixed with other types of search results. On Windows 8 or 8.1, you can choose to search only for files. If you want to perform a search without leaving the desktop in Windows 8.1, press Windows Key + S to open a search sidebar. You can also initiate searches directly from Windows Explorer — that’s File Explorer on Windows 8. Just use the search box at the top-right of the window. Windows will search the location you’ve browsed to. For example, if you’re looking for a file related to Windows and know it’s somewhere in your Documents library, open the Documents library and search for Windows. Using Advanced Search Operators On Windows 7, you’ll notice that you can add “search filters” form the search box, allowing you to search by size, date modified, file type, authors, and other metadata. On Windows 8, these options are available from the Search Tools tab on the ribbon. These filters allow you to narrow your search results. If you’re a geek, you can use Windows’ Advanced Query Syntax to perform advanced searches from anywhere, including the Start menu or Start screen. Want to search for “windows,” but only bring up documents that don’t mention Microsoft? Search for “windows -microsoft”. Want to search for all pictures of penguins on your computer, whether they’re PNGs, JPEGs, or any other type of picture file? Search for “penguin kind:picture”. We’ve looked at Windows’ advanced search operators before, so check out our in-depth guide for more information. The Advanced Query Syntax gives you access to options that aren’t available in the graphical interface. Creating Saved Searches Windows allows you to take searches you’ve made and save them as a file. You can then quickly perform the search later by double-clicking the file. The file functions almost like a virtual folder that contains the files you specify. For example, let’s say you wanted to create a saved search that shows you all the new files created in your indexed folders within the last week. You could perform a search for “datecreated:this week”, then click the Save search button on the toolbar or ribbon. You’d have a new virtual folder you could quickly check to see your recent files. One of the best things about Windows search is that it’s available entirely from the keyboard. Just press the Windows key, start typing the name of the file or program you want to open, and press Enter to quickly open it. Windows 8 made this much more obnoxious with its non-unified search, but unified search is finally returning with Windows 8.1.     

    Read the article

  • Which is Better? The Start Screen in Windows 8 or the Old Start Menu? [Analysis]

    - by Asian Angel
    There has been quite a bit of controversy surrounding Microsoft’s emphasis on the new Metro UI Start Screen in Windows 8, but when it comes down to it which is really better? The Start Screen in Windows 8 or the old Start Menu? Tech blog 7 Tutorials has done a quick analysis to see which one actually works better (and faster) when launching applications and doing searches. Images courtesy of 7 Tutorials. You can view the results and a comparison table by visiting the blog post linked below. Windows 8 Analysis: Is the Start Screen an Improvement vs. the Start Menu? [7 Tutorials] How to Stress Test the Hard Drives in Your PC or Server How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit

    Read the article

  • Upgrading Windows 8 boot to VHD to Windows 8.1&ndash;Step by step guide

    - by Liam Westley
    Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/19/upgrading-windows-8-boot-to-vhd-to-windows-8.1ndashstep-by.aspxBoot to VHD – dual booting Windows 7 and Windows 8 became easy When Windows 8 arrived, quite a few people decided that they would still dual boot their machines, and instead of mucking about with resizing disk partitions to free up space for Windows 8 they decided to use the boot from VHD feature to create a huge hard disc image into which Windows 8 could be installed.  Scott Hanselman wrote this installation guide, while I myself used the installation guide from Ed Bott of ZD net fame. Boot to VHD is a great solution, it achieves a dual boot, can be backed up easily and had virtually no effect on the original Windows 7 partition. As a developer who has dual booted Windows operating systems for years, hacking boot.ini files, the boot to VHD was a much easier solution. Upgrade to Windows 8.1 – ah, you can’t do that on a virtual disk installation (boot to VHD) Last week the final version of Windows 8.1 arrived, and I went into the Windows Store to upgrade.  Luckily I’m on a fast download service, and use an SSD, because once the upgrade was downloaded and prepared Windows informed that This PC can’t run Windows 8.1, and provided the reason, You can’t install Windows on a virtual drive.  You can see an image of the message and discussion that sparked my search for a solution in this Microsoft Technet forum post. I was determined not to have to resize partitions yet again and fiddle with VHD to disk utilities and back again, and in the end I did succeed in upgrading to a Windows 8.1 boot to VHD partition.  It takes quite a bit of effort though … tldr; Simple steps of how you upgrade Boot into Windows 7 – make a copy of your Windows 8 VHD, to become Windows 8.1 Enable Hyper-V in your Windows 8 (the original boot to VHD partition) Create a new virtual machine, attaching the copy of your Windows 8 VHD Start the virtual machine, upgrade it via the Windows Store to Windows 8.1 Shutdown the virtual machine Boot into Windows 7 – use the bcedit tool to create a new Windows 8.1 boot to VHD option (pointing at the copy) Boot into the new Windows 8.1 option Reactivate Windows 8.1 (it will have become deactivated by running under Hyper-V) Remove the original Windows 8 VHD, and in Windows 7 use bcedit to remove it from the boot menu Things you’ll need A system that can run Hyper-V under Windows 8 (Intel i5, i7 class CPU) Enough space to have your original Windows 8 boot to VHD and a copy at the same time An ISO or DVD for Windows 8 to create a bootable Windows 8 partition Step by step guide Boot to your base o/s, the real one, Windows 7. Make a copy of the Windows 8 VHD file that you use to boot Windows 8 (via boot from VHD) – I copied it from a folder on C: called VHD-Win8 to VHD-Win8.1 on my N: drive. Reboot your system into Windows 8, and enable Hyper-V if not already present (this may require reboot) Use the Hyper-V manager , create a new Hyper-V machine, using half your system memory, and use the option to attach an existing VHD on the main IDE controller – this will be the new copy you made in Step 2. Start the virtual machine, use Connect to view it, and you’ll probably discover it cannot boot as there is no boot record If this is the case, go to Hyper-V manager, edit the Settings for the virtual machine to attach an ISO of a Windows 8 DVD to the second IDE controller. Start the virtual machine, use Connect to view it, and it should now attempt a fresh installation of Windows 8.  You should select Advanced Options and choose Repair - this will make VHD bootable When the setup reboots your virtual machine, turn off the virtual machine, and remove the ISO of the Windows 8 DVD from the virtual machine settings. Start virtual machine, use Connect to view it.  You will see the devices to be re-discovered (including your quad CPU becoming single CPU).  Eventually you should see the Windows Login screen. You may notice that your desktop background (Win+D) will have turned black as your Windows installation has become deactivate due to the hardware changes between your real PC and Hyper-V. Fortunately becoming deactivated, does not stop you using the Windows Store, where you can select the update to Windows 8.1. You can now watch the progress joy of the Windows 8 update; downloading, preparing to update, checking compatibility, gathering info, preparing to restart, and finally, confirm restart - remember that you are restarting your virtual machine sitting on the copy of the VHD, not the Windows 8 boot to VHD you are currently using to run Hyper-V (confused yet?) After the reboot you get the real upgrade messages; setting up x%, xx%, (quite slow) After a while, Getting ready Applying PC Settings x%, xx% (really slow) Updating your system (fast) Setting up a few more things x%, (quite slow) Getting ready, again Accept license terms Express settings Confirmed previous password Next, I had to set up a Microsoft account – which is possibly now required, and not optional Using the Microsoft account required a 2 factor authorization, via text message, a 7 digit code for me Finalising settings Blank screen, HI .. We're setting up things for you (similar to original Windows 8 install) 'You can get new apps from the Store', below which is ’Installing your apps’ - I had Windows Media Center which is counts as an app from the Store ‘Taking care of a few things’, below which is ‘Installing your apps’ ‘Taking care of a few things’, below ‘Don't turn off your PC’ ‘Getting your apps ready’, below ‘Don't turn off your PC’ ‘Almost ready’, below ‘Don't turn off your PC’ … finally, we get the Windows 8.1 start menu, and a quick Win+D to check the desktop confirmed all the application icons I expected, pinned items on the taskbar, and one app moaning about a missing drive At this point the upgrade is complete – you can shutdown the virtual machine Reboot from the original Windows 8 and return to Windows 7 to configure booting to the Windows 8.1 copy of the VHD In an administrator command prompt do following use the bcdedit tool (from an MSDN blog about configuring VHD to boot in Windows 7) Type bcedit to list the current boot options, so you can copy the GUID (complete with brackets/braces) for the original Windows 8 boot to VHD Create a new menu option, copy of the Windows 8 option; bcdedit /copy {originalguid} /d "Windows 8.1" Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} device vhd=[D:]\Image.vhd Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} osdevice vhd=[D:]\Image.vhd Set autodetection of the HAL (may already be set); bcdedit /set {newguid} detecthal on Reboot from Windows 7 and select the new option 'Windows 8.1' on the boot menu, and you’ll have some messages to look at, as your hardware is redetected (as you are back from 1 CPU to 4 CPUs) ‘Getting devices ready, blank then %xx, with occasional blank screen, for the graphics driver, (fast-ish) Getting Ready message (fast) You will have to suffer one final reboots, choose 'Windows 8.1' and you can now login to a lovely Windows 8.1 start screen running on non virtualized hardware via boot to VHD After checking everything is running fine, you can now choose to Activate Windows, which for me was a toll free phone call to the automated system where you type in lots of numbers to be given a whole bunch of new activation codes. Once you’re happy with your new Windows 8.1 boot to VHD, and no longer need the Windows 8 boot to VHD, feel free to delete the old one.  I do believe once you upgrade, you are no longer licensed to use it anyway. There, that was simple wasn’t it? Looking at the huge list of steps it took to perform this upgrade, you may wonder whether I think this is worth it.  Well, I think it is worth booting to VHD.  It makes backups a snap (go to Windows 7, copy the VHD, you backed up the o/s) and helps with disk management – want to move the o/s, you can move the VHD and repoint the boot menu to the new location. The downside is that Microsoft has complete neglected to support boot to VHD as an upgradable option.  Quite a poor decision in my opinion, and if you read twitter and the forums quite a few people agree with that view.  It’s a shame this got missed in the work on creating the upgrade packages for Windows 8.1.

    Read the article

  • Add New Features to WMP with Windows Media Player Plus

    - by DigitalGeekery
    Do you use Windows Media Player 11 or 12 as your default media player? Today, we’re going to show you how to add some handy new features and enhancements with the Windows Media Player Plus third party plug-in. Installation and Setup Download and install Media Player Plus! (link below). You’ll need to close out of Windows Media Player before you begin or you’ll receive the message below. The next time you open Media Player you’ll be presented with the Media Player Plus settings window. Some of the settings will be enabled by default, such as the Find as you type feature. Using Media Player Plus! Find as you type allows you to start typing a search term from anywhere in Media Player without having to be in the Search box. The search term will automatically fill in the search box and display the results.   You’ll also see Disable group headers in the Library Pane.   This setting will display library items in a continuous list similar to the functionality of Windows Media Player 10. Under User Interface you can enable displaying the currently playing artist and title in the title bar. This is enabled by default.   The Context Menu page allows you to enable context menu enhancements. The File menu enhancement allows you to add the Windows Context menu to Media Player on the library pane, list pane, or both. Right click on a Title, select File, and you’ll see the Windows Context Menu. Right-click on a title and select Tag Editor Plus. Tag Editor Plus allows you to quickly edit media tags.   The Advanced tab displays a number of tags that Media Player usually doesn’t show. Only the tags with the notepad and pencil icon are editable.   The Restore Plug-ins page allows you to configure which plug-ins should be automatically restored after a Media Player crash. The Restore Media at Startup page allows you to configure Media Player to resume playing the last playlist, track, and even whether it was playing or paused at the time the application was closed. So, if you close out in the middle of a song, it will begin playing from that point the next time you open Media Player. You can also set Media Player to rewind a certain number of seconds from where you left off. This is especially useful if you are in the middle of watching a movie. There’s also the option to have your currently playing song sent to Windows Live Messenger. You can access the settings at any time by going to Tools, Plug-in properties, and selecting Windows Media Player Plus. Windows Media Plus is a nice little free plug-in for WMP 11 and 12 that brings a lot of additional functionality to Windows Media Player. If you use Media Player 11 or WMP 12 in Windows 7 as your main player, you might want to give this a try. Download Windows Media Player Plus! Similar Articles Productive Geek Tips Install and Use the VLC Media Player on Ubuntu LinuxFixing When Windows Media Player Library Won’t Let You Add FilesMake VLC Player Look like Windows Media Player 10Make VLC Player Look like Windows Media Player 11Make Windows Media Player Automatically Open in Mini Player Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >