Search Results

Search found 954 results on 39 pages for 'xorg'.

Page 1/39 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • How to revert back to older xorg?

    - by wouter205
    Since the last update of ubuntu 12.04, the system won't boot into gui anymore. It states that it was unable to load the graphics drivers and gives me 4 options, these are: run in low graphics mode for 1 session reconfigure graphics troubleshoot the error exit to console login whichever option I choose, it doesn't solve anything. For instance, when i choose to reconfigure graphics and then switch to vesa drivers, the screen goes back to the option list. So i configured xorg.conf to vesa myself, and i see in the update history that ubuntu updated xserver-xorg-core and xserver-common whereas i blocked these updates in synaptic since i'm aware that updating these files caused troubles with my particular video card (radeon hd6800). So my solution is probably to revert these files to the older (working) versions. How can I do this please (in particular xserver-xorg-core since i think this is the main cause of my problem). thanks! output of ls /etc/X11 -app-defaults xorg.conf Xreset -cursors xorg.conf-backup-120529144709 Xreset.d -default-display-manager xorg.conf.fglrx-0 -Xresources -fonts xorg.conf.fglrx-1 Xsession -rgb.txt xorg.conf.fglrx-2 Xsession.d -X xorg.conf.original-0 -Xsession.options -xinit xorg.conf.original-1 -Xwrapper.config -xkb xorg.conf.vesa Output of sudo aptitude show xserver-xorg-core | grep Versie (read: Version in Flemish) Versie: 2:1.11.4-0ubuntu10.2

    Read the article

  • Where is xorg.conf in Ubuntu 10.04?

    - by Mikey.B
    Hi Guys, I'm in the middle of trying to setup dual monitors on ubuntu and would like to backup my xorg.conf... The documentation I've been thus far say to do the following: sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup But I don't see the xorg.conf file anywhere... Am I missing something? Where is this located?

    Read the article

  • Setting up dual monitors, Xorg.conf issues

    - by JTS
    I just got a new computer (W520, Graphics card nVidia GF106 [Quadro 2000]) and installed ubuntu on it using wubi. I have everything working, so I wanted to set it up to be able to use two monitors with an extended screen. I figured I had to edit Xorg.conf, but the file didnt exist. So I tried to create it by booting in recovery mode, and executing Xorg -configure but I am getting these errors: (EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) [drm] No DRICreatedPCIBusID symbol Number of created screens does not match number of detected devices. Configuration failed. ddxSigGiveUp: Closing log Any idea how I can get Xorg -configure to work, so that I can have an xorg.conf file that I can edit to enable twinview? EDIT: Another way I could ask the same question to solve this problem is, why can't I boot with an xorg.conf file generated by nvidia-xconfig? Is there something in the generated xorg.conf file that might need editing?

    Read the article

  • How to generate xorg.conf? (X -configure segfaults)

    - by Nicolas Raoul
    My video card is working fine, I have no screen problem. I am trying to generate an xorg.conf so I did: [ Logout ] sudo service gdm stop [ Move away xorg.conf.back and xorg.conf.fglrx-0 that were in /etc/X11 ] sudo dpkg-reconfigure xserver-xorg sudo X -configure But this last command segfaults: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux nico 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=7447ab16-3406-442d-81e5-bb6a2d795205 ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 15 16:06:11 2010 List of video drivers: i740 ark geode siliconmotion mach64 s3 r128 apm intel neomagic vesa trident chips s3virge fglrx sis savage rendition i128 tseng ztv mga openchrome radeon ati nv v4l vmware cirrus tdfx nouveau sisusb voodoo fbdev (EE) Can't load FireGL DRM library (libfglrxdrm.so). Backtrace: 0: X (xorg_backtrace+0x3b) [0x80e938b] 1: X (0x8048000+0x61c8d) [0x80a9c8d] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x34d410] 3: X (xf86CallDriverProbe+0x182) [0x80b82d2] 4: X (DoConfigure+0x1c8) [0x816b898] 5: X (InitOutput+0x1da) [0x80b98aa] 6: X (0x8048000+0x1ebbb) [0x8066bbb] 7: /lib/tls/i686/cmov/libc.so.6 (__libc_start_main+0xe6) [0x467bd6] 8: X (0x8048000+0x1e961) [0x8066961] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Note the line Can't load FireGL DRM library (libfglrxdrm.so) Note: I do have file /usr/lib/fglrx/xorg/modules/linux/libfglrxdrm.so It is strange that it segfaults whereas I can use Gnome with no problem but well... Might be related: I tried to install the driver from ATI's website recently, and from then glxgears crashes at start. How can I generate xorg.conf in those conditions? It might or might not involve solving the segfault problem.

    Read the article

  • Ubuntu 11.04 update fail!

    - by Robertini
    I try to update Ubuntu Natty Narwhal, but I got this error: dpkg: .../xserver-xorg-core_2%3a1.9.99.901+git20110131.be3be758-0ubuntu6_i386.deb miatt xserver-xorg-core-t is tartalmazza: xserver-xorg-core breaks xserver-xorg-video-8 nvidia-current provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-cirrus provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-ark provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-tdfx provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-sisusb provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-rendition provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-vesa provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-fbdev provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-savage provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-vmware provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-openchrome provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-s3virge provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-voodoo provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-apm provides xserver-xorg-video-8 and is present and telepített. xserver-xorg-video-sis provides xserver-xorg-video-8 and is present and telepített. dpkg: hibás feldolgozás: /var/cache/apt/archives/xserver-xorg-core_2%3a1.9.99.901+git20110131.be3be758-0ubuntu6_i386.deb (--unpack): installing xserver-xorg-core would break existing software (Adatbázis olvasása ... 178633 files and directories currently installed.) xserver-xorg-video-cirrus 1:1.3.2-2ubuntu3 cseréjének elokészítése (e csomaggal: .../xserver-xorg-video-cirrus_1%3a1.3.2-2ubuntu5_i386.deb) ... Csere kicsomagolása: xserver-xorg-video-cirrus ... man-db triggereinek feldolgozása… Hibák történtek a feldolgozáskor: /var/cache/apt/archives/xserver-xorg-core_2%3a1.9.99.901+git20110131.be3be758-0ubuntu6_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Removing broken packages on distro update (13.04 to 13.10)

    - by user203974
    i'm kinda new to linux. last night i tried upgrading from 13.04 to 13.10 but i got the "could not calculate" error. i read this question and found this error in the main log: Dist-upgrade failed: 'E:Unable to correct problems, you have held broken packages.' and here's a list of my broken packages : Broken libwayland-client0:amd64 Conflicts on libwayland0 [ amd64 ] < 1.0.5-0ubuntu1 > ( libs ) (< 1.1.0) Broken libpam-systemd:amd64 Conflicts on libpam-xdg-support [ amd64 ] < 0.2-0ubuntu2 > ( admin ) Broken cups-filters:amd64 Conflicts on ghostscript-cups [ amd64 ] < 9.07~dfsg2-0ubuntu3.1 > ( text ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ amd64 ] < 0.9.13-1 > ( libs ) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ amd64 ] < 6.90.2daily13.04.05-0ubuntu1 > ( gnome ) (< 7.0.7) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ i386 ] < none > ( none ) (< 7.0.7) Broken libaccount-plugin-generic-oauth:amd64 Conflicts on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libaccount-plugin-generic-oauth:amd64 Breaks on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken python3-aptdaemon.pkcompat:amd64 Breaks on libpackagekit-glib2-14 [ amd64 ] < 0.7.6-3ubuntu1 > ( libs ) (<= 0.7.6-4) Broken libsnmp-base:amd64 Breaks on libsnmp15 [ amd64 ] < 5.4.3~dfsg-2.7ubuntu1 > ( libs ) (< 5.7.2~dfsg-5) Broken libunity-core-6.0-8:amd64 Conflicts on unity-common [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 > ( gnome ) Broken python3-uno:amd64 Conflicts on python-uno [ amd64 ] < 1:4.0.4-0ubuntu1 > ( python ) Broken unity-scope-home:amd64 Conflicts on unity-lens-shopping [ amd64 ] < 6.8.0daily13.03.04-0ubuntu1 > ( gnome ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken usb-modeswitch-data:amd64 Breaks on usb-modeswitch [ amd64 ] < 1.2.3+repack0-1ubuntu3 > ( comm ) (< 1.2.6) Broken unity-gtk2-module:amd64 Conflicts on appmenu-gtk [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken unity-gtk3-module:amd64 Conflicts on appmenu-gtk3 [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken libbamf3-1:amd64 Depends on bamfdaemon [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 -> 0.5.1+13.10.20131011-0ubuntu1 > ( libs ) (= 0.4.0daily13.06.19~13.04-0ubuntu1) Broken bzr-gtk:amd64 Depends on bzr [ amd64 ] < 2.6.0~bzr6571-4ubuntu2 -> 2.6.0-3ubuntu1 > ( devel ) (< 2.6.0) Broken libgphoto2-6-dev:amd64 Conflicts on libgphoto2-2-dev [ amd64 ] < 2.4.14-2 > ( libdevel ) Broken activity-log-manager:amd64 Conflicts on activity-log-manager-common [ amd64 ] < 0.9.4-0ubuntu6.2 > ( utils ) Broken libgjs0d:amd64 Conflicts on libgjs0c [ amd64 ] < 1.34.0-0ubuntu1 > ( libs ) Broken libgtksourceview-3.0-0:amd64 Depends on libgtksourceview-3.0-common [ amd64 ] < 3.6.3-0ubuntu1 -> 3.8.2-0ubuntu1 > ( libs ) (< 3.7) Broken gnome-pie:amd64 Depends on libbamf3-1 [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 > ( libs ) Broken libunity-core-6.0-5:amd64 Depends on unity-services [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 -> 7.1.2+13.10.20131014.1-0ubuntu1 > ( gnome ) (= 7.0.0daily13.06.19~13.04-0ubuntu1) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-r128 [ amd64 ] < 6.9.1+git20130104.24f28a78-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-mach64:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken libxi6:amd64 Breaks on xserver-xorg-core [ amd64 ] < 2:1.13.4~git20130508+server-1.13-branch.10c42f57-0ubuntu0ricotz~raring -> 2:1.14.3-3ubuntu2 > ( x11 ) (< 2:1.14) Broken xserver-xorg-video-ati:amd64 Depends on xserver-xorg-video-mach64 [ amd64 ] < 6.9.4+git20130104.80e62cc1-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-intel:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-r128:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-nouveau:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-cirrus:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-ati [ amd64 ] < 1:7.1.99+git20130730.6a278369-0ubuntu0sarvatt~raring -> 1:7.2.0-0ubuntu10 > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-ati:amd64 Depends on xorg-video-abi-13 [ amd64 ] < none > ( none ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-ati [ amd64 ] < 1:7.1.99+git20130730.6a278369-0ubuntu0sarvatt~raring -> 1:7.2.0-0ubuntu10 > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-cirrus [ amd64 ] < 1:1.5.2+git20130108.e2bf5b25-0ubuntu0sarvatt > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-intel [ amd64 ] < 2:2.99.904+git20131009.b9ad5b62-0ubuntu0sarvatt~raring > ( x11 ) Broken xserver-xorg-video-all:amd64 Depends on xserver-xorg-video-nouveau [ amd64 ] < 1:1.0.9+git20130730.300c5a32-0ubuntu0sarvatt~raring > ( x11 ) thats a lot of stuff ... do i have to remove them one by one ? will removing them caues any issue ? do i have to install them one by one again after the upgrade ?

    Read the article

  • Which Xorg driver (not kernel driver) to use with GMA500/Poulsbo video hardware in 12.04

    - by Somejan
    I have a Asus EeePC with a GMA500 video card. I followed the instructions on https://wiki.ubuntu.com/HardwareSupportComponentsVideoCardsPoulsbo/, which made the netbook boot correctly. Without any xorg.conf file, Xorg uses the VESA driver, which is quite slow. Manually specifying fbdev as driver in xorg.conf also works. Which one should I use? Are there any other drivers for Xorg that do better at 2d accelleration (since the kernel driver doesn't support 3d acceleration)?

    Read the article

  • Accidentally deleted /etc/X11/xorg.conf.original, and now log in no longer works

    - by Cester Nilap
    I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

    Read the article

  • Accidentally deleted /etc/X11/xorg.conf.original, and now login no longer works

    - by Cester Nilap
    I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

    Read the article

  • Partial upgrade on 12.04, how to stop nagging after locking to a working NVIDIA & xorg

    - by alsk
    How to stop the upgrade manager from offering updates and upgrades that potentially would harm my working 2D and 3D graphics? Finally, I got 12.04 working as it should: with nvidia-173 drivers by downgrading xorg and locking the version: On my 32-bit system on Athlon64, with (Albatron) NVIDIA GeForce FX5700XT, locked (/pinned) to xorg 1:7.6-7ubuntu7, xserver-xorg-core 2:11.1-0obuntu10.07, nvidia-173 173.14.35-0ubuntu0.2? An annoying thing left is that every time the updates are checked, I get warning of partial updates, and ambiguous options of "partial update" and "close". Ambiguous in that sense that if I click close, I will get option to update a few packages, which has been OK, while "partial update" would like to update my kernel to 3.2, alter xorg, remove nvidia-173 etc., and update mesa etc. This is not what I call appropriate, after locking XORG and NVIDIA drivers to working ones. One may say according to package management logic it may be correct, but to me as an user it makes little sense. Last Ubuntu that worked without big mess for me was 10.10, hence I will not put 12.10 to my "production" system, until I can be sure it will not trash the system again. P.S. Is there a recommended way to keep NVIDIA GeForce FX working with 3D on Ubuntu... in future?

    Read the article

  • Xorg crashes ever since using Nvidia dual monitors

    - by legion
    Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • How to reset the Xorg / xserver in 12.04 Precise Pangolin

    - by thomas
    xserver keeps crashing on my general user account both in unity 3d and 2d. It doesn't do it on the guest account. That's why I want to reset / rollback everything xserver related, hoping this is going to fix it. Most answers on this involve sudo dpkg-reconfigure xserver-xorg. However, this does nothing for me (generates no output) and I read in other forums, that it's deprecated. So, what's the current way to reset all xserver / xorg options; what's the alternative to sudo dpkg-reconfigure xserver-xorg ? Thanks Edit: X crashes during work, not before login or so. And the effect of a crash is, that I get thrown out of the session, not a freeze or machine crash.

    Read the article

  • How to reset the Xorg / xserver?

    - by thomas
    xserver keeps crashing on my general user account both in unity 3d and 2d. It doesn't do it on the guest account. That's why I want to reset / rollback everything xserver related, hoping this is going to fix it. Most answers on this involve sudo dpkg-reconfigure xserver-xorg. However, this does nothing for me (generates no output) and I read in other forums, that it's deprecated. So, what's the current way to reset all xserver / xorg options; what's the alternative to sudo dpkg-reconfigure xserver-xorg ? Thanks Edit: X crashes during work, not before login or so. And the effect of a crash is, that I get thrown out of the session, not a freeze or machine crash.

    Read the article

  • How to disable DisplayInfo for Intel i810 when there is no xorg.conf

    - by user86954
    I'm testing Ubuntu 12.04 on an office desktop. This machine has an integrated Intel i810. This very machine used to run Ubuntu (or kubuntu) quite well, until the natty narwhal release, when the xserver started freezing. This seems to be caused by an issue with a call to the video bios, which can be circumvented by disabling the option DisplayInfo. I tried creating an xorg.conf by using Xorg -configure, but it produced an error after trying to make a file. I did have a file, and I put it in /etc/X11 with DisplayInfo false (maybe it wants "disabled"?), but it wouldn't boot at all until I removed that xorg.conf. There is no 10-monitor.conf file either. All I want to do is set the appropriate option so that my intel display doesn't freeze. Is there any other way I can disable the DisplayInfo? Andrew

    Read the article

  • Ubuntu 12.10 broken, shutdown while updating

    - by UnknownDude
    I got the following problem: My PC shutdown while upgrading from 12.04 to 12.10. Everything seems to work but I can't install the missing updates. It always tells me to run apt-get install -f, but when I do so it just says: (It's in German, hope it doesn't matter) Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Statusinformationen werden eingelesen... Fertig Abhängigkeiten werden korrigiert... Fertig Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt: espeak gcc-4.6-base:i386 gir1.2-notify-0.7 libcamel-1.2-29 libebook-1.2-12 libedataserver-1.2-15 libgconf2-4 libgnome-bluetooth8 libgnome-menu2 libgnomekbd7 libgomp1:i386 libgweather-3-0 libimobiledevice2 libindicate5 libkpathsea5 libpoppler19 libusbmuxd1 python-gmenu Verwenden Sie »apt-get autoremove«, um sie zu entfernen. Die folgenden zusätzlichen Pakete werden installiert: nvidia-current-updates xserver-xorg-core xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-savage xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-vesa xserver-xorg-video-vmware Vorgeschlagene Pakete: xfonts-100dpi xfonts-75dpi gpointing-device-settings touchfreeze firmware-linux Die folgenden Pakete werden ENTFERNT: nvidia-current Die folgenden Pakete werden aktualisiert (Upgrade): nvidia-current-updates xserver-xorg-core xserver-xorg-input-evdev xserver-xorg-input-mouse xserver-xorg-input-synaptics xserver-xorg-input-vmmouse xserver-xorg-input-wacom xserver-xorg-video-cirrus xserver-xorg-video-fbdev xserver-xorg-video-mga xserver-xorg-video-neomagic xserver-xorg-video-nouveau xserver-xorg-video-openchrome xserver-xorg-video-qxl xserver-xorg-video-savage xserver-xorg-video-sis xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-vesa xserver-xorg-video-vmware 20 aktualisiert, 0 neu installiert, 1 zu entfernen und 133 nicht aktualisiert. 8 nicht vollständig installiert oder entfernt. Es müssen noch 0 B von 70,6 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 184 MB Plattenplatz freigegeben. Möchten Sie fortfahren [J/n]? j (Lese Datenbank ... 242727 Dateien und Verzeichnisse sind derzeit installiert.) Entfernen von nvidia-current ... Removing all DKMS Modules Error! There are no instances of module: nvidia-current 295.40 located in the DKMS tree. Done. Traceback (most recent call last): File "/usr/bin/quirks-handler", line 26, in <module> import Quirks.quirkapplier File "/usr/lib/python2.7/dist-packages/Quirks/quirkapplier.py", line 26, in <module> import XKit.xutils ImportError: No module named XKit.xutils dpkg: Fehler beim Bearbeiten von nvidia-current (--remove): Unterprozess installiertes pre-removal-Skript gab den Fehlerwert 1 zurück Trigger für bamfdaemon werden verarbeitet ... Rebuilding /usr/share/applications/bamf.index... Trigger für libc-bin werden verarbeitet ... ldconfig deferred processing now taking place Fehler traten auf beim Bearbeiten von: nvidia-current E: Sub-process /usr/bin/dpkg returned an error code (1) When I try to remove nvidia-current it tells me to run apt-get install -f. Do you guys have any idea? I don't want to reinstall my whole system, takes a lot of time to encrypt everything again and so on.

    Read the article

  • Enabling "AllowDualLinkModes" in xorg.conf

    - by Gausie
    I'm using a GeForce GT 620 (which is dual-link compatable) and a DVI-I dual-link splitter to try to have a desktop extended onto two monitors. At the moment when I plug in the monitors, only the monitor on the female VGA marked "1" gets a signal, and the other screen gets nothing and only one screen is detected by nvidia-settings. After reading around, I have realised that my graphics card probably comes with dual-link disabled by default, and I can enable it by adding an "AllowDualLinkModes" option to my xorg.conf. This is the current state of my xorg.conf Section "Device" Identifier "Default Device" Option "NoLogo" "True" EndSection Where do I put the line about AllowDualLinkModes? Do I create a new Section? Have I misunderstood? Cheers Gausie

    Read the article

  • How can I roll back xserver-xorg-core and xserver-common?

    - by Ville Sundberg
    A recent update to Xorg broke my desktop, which now looks like this: http://i.imgur.com/PbBxh.jpg In short, the desktop background is not updating on the secondary display. (And if there is no secondary display, the primary display background stops updating.) Looking into the history, I found that this happened right after upgrading two packages: xserver-xorg-core xserver-common These were upgraded to 1.9.0-0ubuntu7.3. I'd like to downgrade these packages. How do I do that? I've checked that both have another version in the maverick repo: xserver-xorg-core: Installed: 2:1.9.0-0ubuntu7.3 Candidate: 2:1.9.0-0ubuntu7.3 Version table: *** 2:1.9.0-0ubuntu7.3 0 500 http://fi.archive.ubuntu.com/ubuntu/ maverick-updates/main amd64 Packages 100 /var/lib/dpkg/status 2:1.9.0-0ubuntu7 0 500 http://fi.archive.ubuntu.com/ubuntu/ maverick/main amd64 Packages However, apt won't let me downgrade them: ville@fluxx ~ % sudo apt-get install xserver-common=2:1.9.0-0ubuntu7 xserver-xorg-core=2:1.9.0-0ubuntu7 The following packages have unmet dependencies: xserver-xorg-core : Depends: xserver-xorg but it is not going to be installed E: Broken packages And this is the reason: ville@fluxx ~ % sudo apt-get install xserver-common=2:1.9.0-0ubuntu7 xserver-xorg-core=2:1.9.0-0ubuntu7 xserver-xorg-core The following packages have unmet dependencies: xserver-xorg-core : Depends: xserver-common (>= 2:1.9.0-0ubuntu7.3) but 2:1.9.0-0ubuntu7 is to be installed E: Broken packages Am I out of options here?

    Read the article

  • System Error Report /usr/bin/Xorg

    - by jimirings
    I have recently begun getting a System Error Report message when I start up my computer. I haven't installed anything recently other than the usual updates or done anything else out of the ordinary. The details for the report just say "/usr/bin/Xorg". It doesn't seem to be causing me any problems beyond the annoying error message. I saw these questions regarding this problem: System Error Report - Xorg How do I enable or disable Apport? That's all dandy for getting the message to go away, but I'd rather fix the problem. Any ideas how I can make that happen? I'm running Ubuntu 12.04 on a Toshiba NB505. I am, of course, happy to provide any other relevant information that may be needed. Thanks in advance.

    Read the article

  • Keyboard freezes when xorg crashes.

    - by gsedej
    Situation is like that. Many times has happened that Xorg freezes and with it also keyboard. Quite some times because of some Compiz effects or Flash (fullscreen switch). Keyboard becomes totaly unresponsive, while mouse still works (I can move cursor, but can't click since desktop freezes) and music still plays and I can connect trough ssh. This is the only way I know I can try to solve problem - either by killing browser&flash or lastly restarting xorg server. This problem appears on more than one Ubuntu computer. My home dekstop with proprietery nvidia driver, on my work where I use noveau driever (opensource driver for geforce) and sometimes (but rarely) also on laptop with ATI graphics (using r300g driver which is really good!). Can someone explains why mouse still works while I can't input from keyboard? (I can't switch to virtual console or do R-E-I-S-U-B command) I have USB keyboard and USB mouse.

    Read the article

  • VertTwoFingerScroll and VertEdgeScroll not settable via xorg.conf

    - by James Wood
    I've just upgraded to Saucy (this was working in Raring). I've tried rebooting. Here's /etc/X11/xorg.conf: Section "InputClass" Identifier "Touchpad" Driver "synaptics" MatchIsTouchpad "on" Option "PressureMotionMinZ" "60" Option "MaxTapMove" "4" Option "PalmDetect" "1" Option "VertTwoFingerScroll" "1" Option "VertEdgeScroll" "0" EndSection And here's the output from synclient: LeftEdge = 100 RightEdge = 2408 TopEdge = 71 BottomEdge = 1249 FingerLow = 1 FingerHigh = 1 MaxTapTime = 180 MaxTapMove = 4 MaxDoubleTapTime = 180 SingleTapTimeout = 180 ClickTime = 100 EmulateMidButtonTime = 75 EmulateTwoFingerMinZ = 282 EmulateTwoFingerMinW = 7 VertScrollDelta = 56 HorizScrollDelta = 56 VertEdgeScroll = 1 HorizEdgeScroll = 1 CornerCoasting = 0 VertTwoFingerScroll = 0 HorizTwoFingerScroll = 0 MinSpeed = 1 MaxSpeed = 1.75 AccelFactor = 0.0705716 TouchpadOff = 2 LockedDrags = 0 LockedDragTimeout = 5000 RTCornerButton = 2 RBCornerButton = 3 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 1 TapButton2 = 3 TapButton3 = 0 ClickFinger1 = 1 ClickFinger2 = 1 ClickFinger3 = 0 CircularScrolling = 0 CircScrollDelta = 0.1 CircScrollTrigger = 0 PalmDetect = 1 PalmMinWidth = 10 PalmMinZ = 200 CoastingSpeed = 20 CoastingFriction = 50 PressureMotionMinZ = 60 PressureMotionMaxZ = 160 PressureMotionMinFactor = 1 PressureMotionMaxFactor = 1 ResolutionDetect = 1 GrabEventDevice = 1 TapAndDragGesture = 1 AreaLeftEdge = 0 AreaRightEdge = 0 AreaTopEdge = 0 AreaBottomEdge = 0 HorizHysteresis = 14 VertHysteresis = 14 ClickPad = 0 Notice that PressureMotionMinZ, MaxTapMove and PalmDetect are as specified in xorg.conf, but VertEdgeScroll and VertTwoFingerScroll aren't. I can set them temporarily via synclient VertEdgeScroll=0 and synclient VertTwoFingerScroll=1, but these changes are lost when I reboot. What's the best way of fixing this?

    Read the article

  • Keyboard freezes when xorg crashes

    - by gsedej
    Situation is like that. Many times has happened that Xorg freezes and with it also keyboard. Quite some times because of some Compiz effects or Flash (fullscreen switch). Keyboard becomes totaly unresponsive, while mouse still works (I can move cursor, but can't click since desktop freezes) and music still plays and I can connect trough ssh. This is the only way I know I can try to solve problem - either by killing browser&flash or lastly restarting xorg server. This problem appears on more than one Ubuntu computer. My home dekstop with proprietery nvidia driver, on my work where I use noveau driever (opensource driver for geforce) and sometimes (but rarely) also on laptop with ATI graphics (using r300g driver which is really good!). Can someone explains why mouse still works while I can't input from keyboard? (I can't switch to virtual console or do R-E-I-S-U-B command) I have USB keyboard and USB mouse.

    Read the article

  • Display not using xorg.conf?

    - by mark kirby
    How can I force my PC to use the xorg.conf file ? I have it set up correctly and it is located at etc/x11/xorg.conf but it is ignored by at start up, I know the file is valid as I created it using nvidia-settings. I just do not know why it is been ignored. Thanks for any help Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Vestel 40 FHD_LCD-TV" HorizSync 15.0 - 46.0 VertRefresh 49.0 - 61.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 650" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60 +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Installing 12.10 messed up Xorg

    - by Ghost
    So I finally decided to upgrade from 12.04 and now my ubuntu install has been rendered unusable. I'm getting the "no screens detected" error from xorg in the console, and no mattr how many times I reinstall it xorg keeps throwing the same errors. I already had to do a bunch of hacks like nomodeset just to get to the console, else I would get an infinite tabulator after the purple boot screen. The machine has a 4200HD IGP, I even tried installing fglrx legacy (4xxx series and below are not supported in regular fglrx anymore) which was a subpar driver in 12.04 but in hopes that the machine would at least work, but nope, nothing at all. Anyone had the same problem? how do I fix it? EDIT: just wanted to add that I upgraded to 13.04 and it didn't solve anything, in fact it might have broken things even further.

    Read the article

  • Xorg becomes unkillable at 3AM

    - by chew socks
    Most nights, some time in the hour of 3AM my xorg process will increase to 100% cpu and gpu load will also increase to 100%. The process also becomes unkillable. I cannot sudo kill -9 it or get back control with sudo service lightdm restart. I also cannot switch to to a tty screen with ctrl + alt + f1. To reboot I have to log in with ssh, but this is not perfect because if I reboot while it is doing this my ZFS pool will fail to mount when it comes back up ( that is where my /home is ). Does anyone have any ideas as to why I can't stop and restart xorg, or even better, know why this is happening? Thanks NOTE: For anyone who comes looking for the same problem. I disabled catalyst AI and made it through the night. I've been up for 1 day 3 hours now. My record for this month is 2 days and 19 hours without a problem. My all time record is 6 days without a crash. I'll post here if it crashes again or I'm able to set a new record.

    Read the article

  • xorg-edgers PPA with llvmpipe breaks AMD APU system

    - by linux_RRT
    I've read before where this had happened to another user with the same system... I was running Ubuntu 12.04 LTS with Kernel 3.2.0.29 and decided to give xorg-edgers a try. I purged fglrx* and xorg* before beginning. I upgraded with sudo apt-get upgrade -d The system downloaded and installed 109MB worth of data to the system, including llvmpipe which I am very unfamiliar with, and Kernel 3.5.0.11. The system was then rebooted to finalize the upgrade. The system boots to a black screen and then tells me "The system is running in low-graphics mode". Did I miss a step in the install? Or do the newest open-source drivers just not work with my hardware? I realize this hardware (APU) is some of the newer development. I dropped to command via the fallback menu and attempted to boot lightdm as root, but the system hangs in 'Configuring kernel parameters' at Starting initializes zram swaping. ...and then it just sits there. The other thing that concerns me is the output at the top of the screen that says: could not write bytes: Broken pipe Does llvmpipe work for this type of system? To be clear the system is: MSI x370-206us Laptop Radeon HD 6320 AMD e450 APU 1.67ghz dual-core Any help would be much appreciated. Like I said, I'm pretty sure I followed the right order of operations for the install procedure, but I was curious if anyone with similar hardware had experienced anything similar.

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >