Search Results

Search found 10515 results on 421 pages for 'automatically'.

Page 310/421 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

  • script to run sox to combine multiple mono tracks to stereo

    - by Ze'ev
    I have a folder full of .wav audio files. Some are stereo, most are mono splits. The mono split pairs are all named foo bar track.L.wav and foo bar track.R.wav I can use the command line tool sox to combine a mono pair into 1 stereo track like this: sox -M track1.L.wav track1.R.wav track1.Stereo.wav where the first 2 files are the mono pairs, and the third is the output stereo file. This is great, but I'd like to have a script that will automatically find all the mono pairs and combine them into stereo files. I.e., I need it to find all files which have the same name except for the .L. and .R. before the extension, and run sox on them, outputting to a new file with the same name without the L/R suffix. For example, if my folder contains these files: track1.L.wav track2.L.wav track3.L.wav track4.L.wav track1.R.wav track2.R.wav track3.R.wav track4.R.wav track6.wav track7.wav I need to run these commands: sox -M track1.L.wav track1.R.wav track1.Stereo.wav sox -M track2.L.wav track2.R.wav track2.Stereo.wav sox -M track3.L.wav track3.R.wav track3.Stereo.wav sox -M track4.L.wav track4.R.wav track4.Stereo.wav Here's where I am so far: for file in ./*.L.wav; do file2=`echo $file | sed 's_\(.*\).L.wav_\1.R.wav_'`; out=`echo $file | sed 's_\(.*\).L.wav_\1.STEREO.wav_'`; echo $file - $file2 - $out; done That works, but when I replace the echo line with sox -M $file $file2 $out; it doesn't work; spaces in the filenames cause it to fail.

    Read the article

  • Editing a windows XP installation's registry without being able to log in.

    - by Alain
    I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

    Read the article

  • NAT, iptables and problematic ports

    - by Rajie
    I am building a small office network with virtual machines. My schema is this: Computer A: gateway, ip 1.1.1.1, iptables used for NAT [eth0=public internet dhcp, dhcp; eth1=gateway] Computer B: client, ip 1.1.1.2, using gateway from Computer A. NAT is working, and Computer B can access the internet using the A's gateway. I redirected some incoming ports from A to B (for instance, if A receives a request to port 80, it goes automatically to Computer B's Apache). The thing is that I do not really understand how to open/close ports for Computer B from Computer A. I know how to close a port: iptables -A INPUT -p tcp --dport 80 -j DROP And it will refuse all incoming (not output) connections to port 80. However, this works for main interface eth0. I tried to, for instance, drop ingoing and outgoing connections for Computer B, port 80: iptables -A FORWARD -i eth1 -o eth0 -p tcp --dport 80 -j DROP iptables -A FORWARD -i eth0 -o eth1 -p tcp --dport 80 -j DROP But it does not work. And I cannot figure out what I am doing wrong. Any clue?

    Read the article

  • Postfix installation error on Ubuntu

    - by kgpdeveloper
    How do I fix this error on Ubuntu 10.04 ? Reading package lists... Done Building dependency tree Reading state information... Done postfix is already the newest version. The following packages were automatically installed and are no longer required: libaprutil1-dbd-sqlite3 libcap2 apache2.2-bin libapr1 libaprutil1-ldap libaprutil1 php5-common Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up postfix (2.7.0-1) ... Postfix configuration was not changed. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run '/etc/init.d/postfix reload'. Running newaliases newaliases: warning: valid_hostname: numeric hostname: 202002 newaliases: fatal: file /etc/postfix/main.cf: parameter myhostname: bad parameter value: 202002 dpkg: error processing postfix (--configure): subprocess installed post-installation script returned error exit status 75 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) Even if I reboot, the same error shows up. Thanks for the help..

    Read the article

  • upstart config to start sync daemon as non-root user

    - by Rudiger Wolf
    I am planning to use inosync to sync data from master server to several client servers. I have created a user called rsyncuser in both master and slaves with access permissions and passwordless ssh access from master to slave servers. Inosync is working when I use it from the command line as rsyncuser. Next I want this to start automatically when server is turned on. I figured upstart is the way to get this working. I am unable to find the right upstart command to get this working. Here is my upstart conf file. The problem seems to be around running "inosync -d -c /etc/inosync/inosync_rsyncuser.py" as a given user. As you can see I have tried a number of various options! description "start inosync to sync data to other CDN Servers as rsyncuser" console output #start on startup #stop on shutdown start on (net-device-up and local-filesystems) stop on runlevel [016] #start on runlevel [2345] #stop on runlevel [!2345] #kill timeout 30 env RUN_AS_USER=rsyncuser expect fork script echo "Inosync updtart job seems to have started" /tmp/upstart.log # exec sudo -u rsyncuser -c "ls -la" /tmp/upstart.log 2&1 # LOGFILE=/var/log/logfile.`date +%Y-%m-%d`.log # exec su - $RUN_AS_USER -c "inosync -d -c /etc/inosync/inosync_rsyncuser.py" $LOGFILE 2&1 # exec su -c "ls -la" /tmp/upstart.log 2&1 # emit inosync_running end script

    Read the article

  • chef clients behind firewall

    - by tec
    I am currently learning about chef. What I understood so far: I have to install chef-server on an own server or use the hosted chef. I have to install chef-client on the servers that I want to manage aka nodes (manually or using knife bootstrap). I installed several chef tools on my own PC that I can use to manage the nodes, e.g. knife. Now in my case the specialty is that the nodes are behind a firewall/load balancer/proxy. The nodes can access servers on the outside via NAT (http works and I can configure chef-specific hosts to work as well). However they can only be contacted from the outside via a ssh tunnel. There is really much documentation about chef available but I did not find an answer to these questions: When using knife, is it enough when I set up a ssh tunnel manually on my own PC or does the chef server need to contact the nodes? When using knife, can I configure it to setup a ssh tunnel automatically? When using the chef server web ui can I configure it to connect to the nodes via ssh tunnel or do I need a setup where I setup the tunnel myself e.g. using monit? Is this even possible with hosted chef? Instead of using knife or the web ui: Can I issue the same management commands directly on the nodes using chef-client? What solution would you recommend? Thanks a lot for taking your time to help and answering one or more of these related questions

    Read the article

  • How to configure Farsun USB barcode scanner to not auto-trigger

    - by David Grayson
    At my company we have several USB barcode scanners. I'm not sure exactly what model they are, but I think they are the FG9800 from Farsun because that's what they look like on the exterior. They came with a programming manual that is very similar to this document from the Farsun website. When I scan the "Output Firmware Version" barcode, my scanner types the following into the computer: Farsun V2.00 2011-01-01 Is it possible to configure these scanners so they only read barcodes in response to the trigger button being pressed? I don't want them to automatically read barcodes. Additionally, I want this setting to be remembered while the scanner is turned off. Since this scanner only has a USB port, the only way to configure it that I know of is to scan bar codes from the manual (or make your own). I have tried scanning the configuration bar codes for Single Scan (013300), Single Scan No Trigger (013301), and Laser/CCD Timeout - 5 Seconds (0134005) from this document. Sometimes (but not often) this puts the scanner in to the right mode, where it only scans when the button is pressed. Unfortunately, the scanner seems to always leave this mode when it is power cycled. I have also scanned the "Reset Configuration To Defaults" barcode (0B) many times. We have three different scanners like this and I have not been able to successfully configure any of them. If the things I want are not possible with these Farsun-based scanners, is there some other scanner we can use?

    Read the article

  • CPU and Motherboard clock speeds

    - by NZHammer
    I have been doing some reading about CPU clock speeds and how CPU clock speeds are calculated. After reading several articles, I have come to the understanding that your CPU clock speed is determined by: CPU clock speed = cpu multiplier x mobo clock speed A few questions came about after reading this which I cannot seem to find the answer to anywhere: If the CPU clock speed is dependent upon the mobo clock speed, then how is the clock speed of the CPU predetermined upon buying the CPU (i.e. written on the box without knowing what mobo is being used)? After installation, does the CPU adjust it's multiplier based upon the mobo clock speed to achieve advertised speeds? For example, if the CPU clocks speed is advertised at 2.4GHz and the mobo clock speed is 100MHz, will the multiplier be automatically set to 24x? Why does mobo clock speed seem to not be very important / talked about? For example, when I search on Newegg, mobo clock speed never seems to be listed. When I search enthusiast forums and overclocking forums, mobo clock speed is rarely mentioned. To me, it seems like the mobo clock speed would be pretty important. If I am understanding things correctly, a lower mobo clock speed means that you CPU must work harder to achieve advertised clock speeds. I guess that I should stop there with the questions for now, as I may be asking my questions based on incorrect assumptions. Thanks!

    Read the article

  • Persistent static route stops working after VPN drops and reconnects

    - by user76157
    I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

    Read the article

  • Windows 7 - Wireless Signal Good - Internet Often Says Limited or No Activity

    - by Anthony Trilussa Pizzo
    Hi - I have a New Dell Studio XPS latop that I hooked up in early January of 2010. The Dell Studio XPS laptop is connected to my wireless router (Belkin Wireless N). The router was purchased in Februaru of 2010 because I thought my router was bad (A D-Link router). Comcast is my ISP. Everyday, at random times, the internet will have a good signal (according to the little Win 7 icon on the taskbar) but I will receive a message saying limited or no internet access and I cannot access the internet. I have the internet setup to automatically get an IP and I did the IPCONFIG release / renew but with no success. I even had a WiFi enabled Blackberry right next to my computer and whenever the computer loses an WiFi connection, so does the Blackberry. The router isnt't bad, because the old router did the same thing - giving me limited or no internet access while working sometimes. I also tried using two other laptops in same physical position as my Dell Studio XPS laptop and they have the same problem. I am going crazy trying to figure this out as I have called the Router Company (Belkin), my ISP (Comcast), and my computer maker (Dell). Can anyone offer some suggestions and I can try them as we work through this and maybe one of the suggestion will be right one. Thanks in advance for even reading my problem. I searched for a problem similar to mine on the internet, but I have not been able to keep a steady internet connection. (Side note - I used to have an IBM thinkpad laptop and D - Link router and for years that wireless connection worked FLAWLESSLY, with the same physical set up - the laptop in my bedroom, and the router in the basement.)

    Read the article

  • Fedora-13 not detecting USB HDD enclosure (with HDD)

    - by Ramy
    I recently purchased this enclosure: http://www.amazon.com/Inland-2-5-Inc.../dp/B003SZ2Y12 and this HDD: http://www.amazon.com/Seagate-Barrac...3811667&sr=8-1 Now, I let my brother in law use the enclosure with his 160GB disk to back some stuff up. He then gave me that disk in my enclosure and I backed up my computer and my fiances computer. So...obviously, i had no problem mounting that disk. I plan on keeping this disk as my "natural disaster backup" (in case my apartment building burns down, i still have that disk with my stuff backed up). I want to use the 1.5T disk as my regular/more frequent backup device, but it doesn't seem to be mounting to my F-13 machine. I searched through this forum and found someone advising to run the following: # mount -t vfat /dev/sda1 /mnt this is the output i get when I run that: mount: /dev/sda1 already mounted or /mnt busy mount: according to mtab, /dev/sda1 is mounted on /boot Thing is, shouldn't this disk automatically mount just like the LAST disk in the same enclosure with the same USB cable and power supply? Any help would be greatly appreciated. THANKS!

    Read the article

  • Virtual Machines and Automatic Software Updates

    - by Zian Choy
    It's obvious that one's main computer should always be have all the latest security patches and most people don't blink an eye when Microsoft Update installs non-security updates. In the land of virtual machines, I've run into 2 problems with automatic updates: The virtual machines are only run when needed. Only Windows virtual machines seem to patch themselves. To elaborate on #1, I generally make a virtual machine with a purpose in mind. For example, when I needed an old copy of Internet Explorer to reproduce a bug in RSS Bandit, I had a Virtual PC named RSS Bandit. The machine only stayed running for a few minutes at a time. Consequently, there is no downtime for the machine to download updates at 3 AM. To elaborate on #2, I've noticed that if I haven't run a Windows virtual machine in a while, then the moment I log in, the computer frantically downloads updates and within seconds, if I click the Start button, there is a little orange shield next to the "Shutdown" button. However, I ran a freshly created Ubuntu VM for several hours today with hundreds of updates pending and it seemed to never download any of them or install any of them. Is there any reason to be concerned about running VMs with dozens of security holes? If I should be concerned, then is there any way to get Ubuntu to download and install updates rather than just advertising a long list of updates to download next century? I've already tried telling Ubuntu to automatically download and install updates.

    Read the article

  • Create new folder for new sender name and move message into new folder

    - by Dave Jarvis
    Background I'd like to have Outlook 2010 automatically move e-mails into folders designated by the person's name. For example: Click Rules Click Manage Rules & Alerts Click New Rule Select "Move messages from someone to a folder" Click Next The following dialog is shown: Problem The next part usually looks as follows: Click people or public group Select the desired person Click specified Select the desired folder Question How would you automate those problematic manual tasks? Here's the logic for the new rule I'd like to create: Receive a new message. Extract the name of the sender. If it does not exist, create a new folder under Inbox Move the new message into the folder assigned to that person's name I think this will require a VBA macro. Related Links http://www.experts-exchange.com/Software/Office_Productivity/Groupware/Outlook/A_420-Extending-Outlook-Rules-via-Scripting.html http://msdn.microsoft.com/en-us/library/office/ee814735.aspx http://msdn.microsoft.com/en-us/library/office/ee814736.aspx http://stackoverflow.com/questions/11263483/how-do-i-trigger-a-macro-to-run-after-a-new-mail-is-received-in-outlook http://en.kioskea.net/faq/6174-outlook-a-macro-to-create-folders http://blogs.iis.net/robert_mcmurray/archive/2010/02/25/outlook-macros-part-1-moving-emails-into-personal-folders.aspx Update #1 The code might resemble something like: Public WithEvents myOlApp As Outlook.Application Sub Initialize_handler() Set myOlApp = CreateObject("Outlook.Application") End Sub Private Sub myOlApp_NewMail() Dim myInbox As Outlook.MAPIFolder Dim myItem As Outlook.MailItem Set myInbox = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFolderInbox) Set mySenderName = myItem.SenderName On Error GoTo ErrorHandler Set myDestinationFolder = myInbox.Folders.Add(mySenderName, olFolderInbox) Set myItems = myInbox.Items Set myItem = myItems.Find("[SenderName] = " & mySenderName) myItem.Move myDestinationFolder ErrorHandler: Resume Next End Sub Update #2 Split the code as follows: Sent a test message and nothing happened. The instructions for actually triggering a message when a new message arrives are a little light on details (for example, no mention is made regarding ThisOutlookSession and how to use it). Thank you.

    Read the article

  • How does enterprise failover, such as with google.com, actually work?

    - by Alex Regan
    We have a few fedora systems that are configured for web, FTP, and email services. We'd like to mirror these services, so that we can provide near 100% reliability for our users. I'm a fairly experienced Linux administrator, but don't have much experience with redundant systems. What is the best way to do this? How does google and amazon do it? Google.com resolves to multiple IP addresses, but if my local desktop caches one of the IPs that are unreachable, I'm going to get a failed connection message. How do they prevent that from happening? If one of their servers goes down, how is it automatically redirected to another system, without the end-user ever knowing it? I understand there are failover devices, but they're only for failing over the system itself, not a complete network. Let's say we have the worst-case scenario, such as my primary system becomes inaccessible. What are the fundamental components that are used on Linux systems to provide this capability? I'm looking for concepts, or approaches, not answers like "check out openstack". What are the actual pieces that make up the solution? What has to be done to implement this capability? Hopefully my question is clear. I'd like to know what the pieces are that make up a failover system and what approach is taken by successful organizations that implement it. Thanks again, Alex

    Read the article

  • Windows roaming profile when creating a new user profile

    - by molecule
    When a particular user is having a lot of problems with Windows XP e.g. applications crashing, unresponsive applications (which used to work), and as a general troubleshooting practice for a domain user, I normally rename that user's old profile and get him/her to logon to create a "fresh" profile (on the same PC). More often than not, this will solve the problem albeit some reconfiguration i.e. Outlook, Excel add-ins etc. As I took over the systems admin role from another administrator, I would like to know what is the easiest way to find out (either through a third party or some Windows administrative tool) what settings are carried over if the profile is a Roaming Profile. I tested creating a new user profile for one of my users and it seems basic Outlook settings such as the user's mailbox and PSTs are carried over automatically when I create a new user profile. I suspect this is done through a batch file loaded as part of the login script. However, my knowledge of scripting is limited and I don't want any corruptions to be carried over to the new profile. Can someone share their experiences on this? Thanks in advance.

    Read the article

  • Google Chrome - Issues with download dialogs using BinaryWrite

    - by Mila
    Hello, I have an empty ASP .NET page with the code behind to support downloading of PDF files. The page is called from a link-like web control that has NavigateUrl set to this page. In short, I am using the following for streaming: Response.Buffer = false; Response.ClearHeaders(); Response.ContentType = "application/x-pdf"; Response.AddHeader("Content-Disposition","attachment; filename="MyPDFFile.pdf"); byte[] binary = (dataReaderRemote[DataPDFFieldName]) as byte[]; //dataReaderRemote[DataPDFFieldName] has previously retrieved data if (binary != null) { MemoryStream memoryStream = new MemoryStream(binary); int sizeToWrite = CHUNKSIZE; //CHUNKSIZE=1024 for (int i = 0; i < binary.GetUpperBound(0) - 1; i = i + CHUNKSIZE) { if (!Response.IsClientConnected) return; if (i + CHUNKSIZE >= binary.Length) sizeToWrite = binary.Length - i; byte[] chunk = new byte[sizeToWrite]; memoryStream.Read(chunk, 0, sizeToWrite); Response.BinaryWrite(chunk); Response.Flush(); } } Response.Close(); IE as well as Firefox bring the download prompt window asking you whether you wish to open or save the file, while the user remains on the same page containing the link. However, Google Chrome opens a new blank tab and downloads the file automatically. Is there any way to prevent Chrome from opening the extra blank and therefore useless tab? I am using the Google Chrome version 5.0.375.55 (Official Build 47796) on Windows XP. Thanks in advance! Mila

    Read the article

  • IPv4 not enabled in Windows 7

    - by RidDeBakTiYar
    I have a Netbook with Win 7 Starter edition. I am not able to get IPv4 enabled/installed in the Netbook and hence not able to network/connect to Internet. It says "Limited access" when I check connections. It all began when my system crashed and I was not able to get thro beyond the boot screen. The system advice me to try repair with the original OS cd and I did the same. After that the Netbook has booted, but is not able to network. On a detailed study I found that the Network adapter has both IPv4 and IPv6 Protocols, but there are some differences. The IPv4 is not having the "Properties" enabled to configure, while the IPv6 is having "Properties" enabled. I have only a IPv4 Wired and Wireless at home and its not able to get the Netbook connected as it cannot I had tried uninstalling the Adapter to allow windows to automatically detect and install. Using the "netsh" command to uninstall and install, but not having any change in status. There is a option to "Have disk" under add Protocol, but I don't know how to give the standard IPv4 for installation (asking for *.inf). Any help in solving the issue will be very much appreciated

    Read the article

  • from svn to git (+ LDAP + password-less updates + passworded access control)

    - by Jayen
    We have an SVN setup and there are some things we dislike about it and some things we like about it. We want to move to git, but we're not sure exactly what setup will work for us. We're currently using SVN (w/ Authz) + Apache (w/ WebDAV & LDAP). Hook to update the live site [like] Live site update requires no additional interaction [like] Live site update uses stored password [dislike] Commits require centralized-password authentication [like] Commit from live site changes stored credentials [dislike] Access control (per repository) for commits [like] Point 5 above is the one that keeps stuffing us up. Someone makes a commit from the live site and then the hook breaks. We're thinking to use gitosis/gitolite to get access control, but as they use ssh keys, we won't be requiring passwords. We're also thinking to use git-http-backend, and use Apache for authentication, but then do we lose access control? Can the live site be automatically updated from a hook if Apache requires authentication? Can we combine git-http-backend and gitosis/gitolite somehow? Can we store http credentials with git?

    Read the article

  • How to count the most recent value based on multiple criteria?

    - by Andrew
    I keep a log of phone calls like the following where the F column is LVM = Left Voice Mail, U = Unsuccessful, S = Successful. A1 1 B1 Smith C1 John D1 11/21/2012 E1 8:00 AM F1 LVM A2 2 B2 Smith C2 John D2 11/22/2012 E1 8:15 AM F2 U A3 3 B3 Harvey C3 Luke D3 11/22/2012 E1 8:30 AM F3 S A4 4 B4 Smith C4 John D4 11/22/2012 E1 9:00 AM F4 S A5 5 B5 Smith C5 John D5 11/23/2012 E5 8:00 AM F5 LVM This is a small sample. I actually have over 700 entries. In my line of work, it is important to know how many unsuccessful (LVM or U) calls I have made since the last Successful one (S). Since values in the F column can repeat, I need to take into consideration both the B and C column. Also, since I can make a successful call with a client and then be trying to contact them again, I need to be able to count from the last successful call. My G column is completely open which is where I would like to put a running total for each client (G5 would = 1 ideally while G4 = 0, G3 = 0, G2 = 2, G1 = 1 but I want these values calculated automatically so that I do not have scroll through 700 names).

    Read the article

  • How to Move SMS from iPhone to Mac?

    - by seda16
    SMS is the main form to Communicate with others, you would saved many messages on your iPhone. Well, there're many reasons you need to backup your iPhone sms to the Mac. For example, your family or friends have sent you some important and you want to save them on your iPhone in case you delete them by accident, or you just need to backup your sms for other use. So today let's talk about how to move sms from iPhone to Mac. It would be very easy if you use an app to help you, I always use the iPhone to Mac transfer on Amacsoft to copy sms from iPhone to Mac. Now let me tell you how to use this great app: Step 1:Connect iPhone to Mac First of all, you need to install and launch the iPhone to Mac transfer, then connect your iPhone to Mac. The iPhone to Mac transfer would recognise your iPhone automatically. And all information of your iPhone will be shown on an interface. Step 2:Select sms and Start the Export Now you can see many choice on the left, find "SMS" and click it, all sms on your iPhone will be listed on the right. Select and check those you want to move, then just click "Export" on the top to start the transfer. Wait just a few a minute the transfer will be done. Great! You have finish the transfer now, it's really very easy, right? I believe it won't be a problem if you want to transfer your sms from iPhone to Mac. By the way you can also use this Amacsoft iPhone to Mac transfer to move other kind of files , like photos, songs etc. If you're a windows user, you can use iPhone to PC transfer on this web to move sms from iPhone to your PC just with the same steps, good luck!

    Read the article

  • Looking for a help desk ticketing system..

    - by Dan
    Hi guys Im looking for a good help desk ticket solution. It must perform the following actions for it to be useful. It needs to have a single point of contact via email..e.g [email protected] If we recieve a telephone(or an email outside of the system) we need to be able to create a ticket as if had been added via the single point of contact, this needs to be done with ease in order to save time. Certain people within our organisation deal with certain customers, so if the email/ custom input support call as mentioned in bullet 2 is picked up as having a relationship with that certain person in our organisation it needs to be sent to them/put in their queue for them to work on. If a person is out of office or sick any tickets sent to them must be forwarded to somebody else or put into a seperate pool of tickets that anybody can access. Perhaps have an agent that sorts through tickets in the pool and assigns them to anybody who is available, preferably the person with fewest tickets in their queue/list. Once a customer emails and the system logs it they immediately get a response with a ticket number and maybe details of who is dealing with the problem. Any correspondance in relation to a particular ticket is automatically grouped into some sort of message, and not made into a load of separate tickets. I.e system scans incoming email subjects for ticket numbers and assosciates it with exisiting tickets if that number exists. Any help is much appreciated Thanks P.S I have taken a look at OTRS but i'm not feeling it so unless someone can convince me I guess i'm after an alternative.

    Read the article

  • Sharing large (multi-Gb) files with clients

    - by Tim Long
    I wasn't sure if this was the best place for this question, but I think it is squarely in the realm of the IT admin so that's the reason I put it here. We need to share large files (several Gigabytes) with external clients. We need a simple way of reliably and automatically publishing these files so that clients can then download them. Our organization has Windows desktops and a Windows SBS 2011 server. Sharing from our server is probably suboptimal from the client's perspective, because of the low upstream bandwidth of typical ADSL (around 1 Mbps) - it would take all day (9 hours for a 4Gb file) for the client to download the file. Uploading to a 3rd party sever is good for the client but painful for us, because we then have to deal with a multi-hour upload. Uploading to a third-part server would be less problematic if it could be made reliable and automatic, e.g. something like a Groove/SharePoint Workspace, simply drop the file in and wait for it to synchronize - but Groove has a 2Gb limit which is not big enough. So ideally I'd like a service with the following attributes: Must work for files of at least 5Gb, preferably 10Gb Once the transfer is started, it must be reliable (i.e. not sensitive to disconnections and service outages) and completely automatic Ideally, the sender would get a notification when the transfer completes. Has to work with Windows based systems. Any suggestions?

    Read the article

  • Replacing latex with unicode symbols

    - by Elazar Leibovich
    Often, during a conversation or an email, or at a forum, I would like to type some math, but I don't need full equation support. Unicode symbols should suffice. What I need is an easy way to type math related unicode symbols. Since I already know latex, it makes sense to use the latex symbol mnemonics to type the math symbols. What I currently did is to write an AutoHotKey script which automatically replaces \latexSymbol with the corresponding unicode symbol, using the "hotstrings" AutoHotKey feautres. However, the AutoHotKey hotstrings proved unstable for many strings. Having a couple of tens lines would cause AHK to fail recognizing the strings from time to time. Any other solution? (No, Alt+unicode number isn't convenient enough) Attached is my AHK script. The PutUni function is taken from here. ::\infty:: PutUni("e2889e") return ::\sum:: PutUni("e28891") return ::\int:: PutUni("e288ab") return ::\pm:: PutUni("c2b1") return ::\alpha:: PutUni("c991") return ::\beta:: PutUni("c992") return ::\phi:: PutUni("c9b8") return ::\delta:: PutUni("ceb4") return ::\pi:: PutUni("cf80") return ::\omega:: PutUni("cf89") return ::\in:: PutUni("e28888") return ::\notin:: PutUni("e28889") return ::\iff:: PutUni("e28794") return ::\leq:: PutUni("e289a4") return ::\geq:: PutUni("e289a5") return ::\sqrt:: PutUni("e2889a") return ::\neq:: PutUni("e289a0") return ::\subset:: PutUni("e28a82") return ::\nsubset:: PutUni("e28a84") return ::\nsubseteq:: PutUni("e28a88") return ::\subseteq:: PutUni("e28a86") return ::\prod:: PutUni("e2888f") return ::\N:: PutUni("e28495") return

    Read the article

  • SharePoint Backup/Restore without stsadm

    - by Kevin
    Due to problems we found with the restore of sites/site collections using stsadm (our tasks generated from workflows were not restored), we've taken a different route for backup/restore. We plan a major customization to our SP site and want to take a backup so we can rollback in case the install fails. In our System Testing (not production) environment, we've backed up the 12 hive, the virtual dir's that the IIS points to SharePoint, and the SharePoint databases in SQL (using SQL server to do the db backups). We have custom event handlers and workflows built with Visual Studio, and deploy the dlls to the GAC as version 2 (signed and versioned in Visual Studio). So when we deploy, the GAC will contain 2 versions of the workflows - version 1 and version 2. During the deploy we use SP stsadm features to install/activate the WF's. We also go to each library and add the new, version 2 WFs. This automatically sets the version 1 WF's to "Not Allow" new instances (which is what we want) and the version 2 as active - perfect so far. When we've completed the install, we then assume a failure and attempt to restore to the same machines (SharePoint on one server, SQL on another). We start by uninstalling the version 2 WF's from the GAC, reset IIS (to clear cache of these ver. 2 WF dlls'), restore the 12-hive and virtual directory folders, then restore the SQL dbs. This is all just as manual as you read it - no stsadm here. All seems to work after our restore, it appears the restore was successful - the mods we made to column names, data changes, etc during the install are all reverted back to the original pre-install state. With one exception. When we run a workflow, it always fails and the Logs in the 12-hive indicates the WF is still trying to use the version 2 of the dll (System.IO file not found error) We think we've backed up and restored all the moving pieces of Sharepoint but we're missing something here, does anybody have any ideas why the version 2 WF dlls are still being referenced eventhough we restored all the folders and db's of SharePoint? Thanks, Kevin

    Read the article

  • Bacula & Multiple Tape Devices, and so on

    - by Tom O'Connor
    Bacula won't make use of 2 tape devices simultaneously. (Search for #-#-# for the TL;DR) A little background, perhaps. In the process of trying to get a decent working backup solution (backing up 20TB ain't cheap, or easy) at $dayjob, we bought a bunch of things to make it work. Firstly, there's a Spectra Logic T50e autochanger, 40 slots of LTO5 goodness, and that robot's got a pair of IBM HH5 Ultrium LTO5 drives, connected via FibreChannel Arbitrated Loop to our backup server. There's the backup server.. A Dell R715 with 2x 16 core AMD 62xx CPUs, and 32GB of RAM. Yummy. That server's got 2 Emulex FCe-12000E cards, and an Intel X520-SR dual port 10GE NIC. We were also sold Commvault Backup (non-NDMP). Here's where it gets really complicated. Spectra Logic and Commvault both sent respective engineers, who set up the library and the software. Commvault was running fine, in so far as the controller was working fine. The Dell server has Ubuntu 12.04 server, and runs the MediaAgent for CommVault, and mounts our BlueArc NAS as NFS to a few mountpoints, like /home, and some stuff in /mnt. When backing up from the NFS mountpoints, we were seeing ~= 290GB/hr throughput. That's CRAP, considering we've got 20-odd TB to get through, in a <48 hour backup window. The rated maximum on the BlueArc is 700MB/s (2460GB/hr), the rated maximum write speed on the tape devices is 140MB/s, per drive, so that's 492GB/hr (or double it, for the total throughput). So, the next step was to benchmark NFS performance with IOzone, and it turns out that we get epic write performance (across 20 threads), and it's like 1.5-2.5TB/hr write, but read performance is fecking hopeless. I couldn't ever get higher than 343GB/hr maximum. So let's assume that the 343GB/hr is a theoretical maximum for read performance on the NAS, then we should in theory be able to get that performance out of a) CommVault, and b) any other backup agent. Not the case. Commvault seems to only ever give me 200-250GB/hr throughput, and out of experimentation, I installed Bacula to see what the state of play there is. If, for example, Bacula gave consistently better performance and speeds than Commvault, then we'd be able to say "**$.$ Refunds Plz $.$**" #-#-# Alas, I found a different problem with Bacula. Commvault seems pretty happy to read from one part of the mountpoint with one thread, and stream that to a Tape device, whilst reading from some other directory with the other thread, and writing to the 2nd drive in the autochanger. I can't for the life of me get Bacula to mount and write to two tape drives simultaneously. Things I've tried: Setting Maximum Concurrent Jobs = 20 in the Director, File and Storage Daemons Setting Prefer Mounted Volumes = no in the Job Definition Setting multiple devices in the Autochanger resource. Documentation seems to be very single-drive centric, and we feel a little like we've strapped a rocket to a hamster, with this one. The majority of example Bacula configurations are for DDS4 drives, manual tape swapping, and FreeBSD or IRIX systems. I should probably add that I'm not too bothered if this isn't possible, but I'd be surprised. I basically want to use Bacula as proof to stick it to the software vendors that they're overpriced ;) I read somewhere that @KyleBrandt has done something similar with a modern Tape solution.. Configuration Files: *bacula-dir.conf* # # Default Bacula Director Configuration file Director { # define myself Name = backuphost-1-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 20 Password = "yourekiddingright" # Console password Messages = Daemon DirAddress = 0.0.0.0 #DirAddress = 127.0.0.1 } JobDefs { Name = "DefaultFileJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } JobDefs { Name = "DefaultTapeJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = "SpectraLogic" Messages = Standard Pool = AllTapes Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" Prefer Mounted Volumes = no } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultFileJob" } Job { Name = "BackupThisVolume" JobDefs = "DefaultTapeJob" FileSet = "SpecialVolume" } #Job { # Name = "BackupClient2" # Client = backuphost-12-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultFileJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=backuphost-1-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /srv/bacula/restore } FileSet { Name = "SpecialVolume" Include { Options { signature = MD5 } File = /mnt/SpecialVolume } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } File = /usr/sbin } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = backuphost-1-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "surelyyourejoking" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = backuphost-12-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "i'mnotjokinganddontcallmeshirley" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "lalalalala" Device = FileStorage Media Type = File } Storage { Name = "SpectraLogic" Address = localhost SDPort = 9103 Password = "linkedinmakethebestpasswords" Device = Drive-1 Device = Drive-2 Media Type = LTO5 Autochanger = yes } # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; DB Address = ""; dbuser = "bacula"; dbpassword = "bbmaster63" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } Pool { Name = AllTapes Pool Type = Backup Recycle = yes AutoPrune = yes # Prune expired volumes Volume Retention = 31 days # one Moth } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = backuphost-1-mon Password = "LastFMalsostorePasswordsLikeThis" CommandACL = status, .status } bacula-sd.conf # # Default Bacula Storage Daemon Configuration file # Storage { # definition of myself Name = backuphost-1-sd SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 SDAddress = 0.0.0.0 # SDAddress = 127.0.0.1 } # # List Directors who are permitted to contact Storage daemon # Director { Name = backuphost-1-dir Password = "passwordslinplaintext" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # Director { Name = backuphost-1-mon Password = "totalinsecurityabound" Monitor = yes } Device { Name = FileStorage Media Type = File Archive Device = /srv/bacula/archive LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } Autochanger { Name = SpectraLogic Device = Drive-1 Device = Drive-2 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg4 } Device { Name = Drive-1 Drive Index = 0 Archive Device = /dev/nst0 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } Device { Name = Drive-2 Drive Index = 1 Archive Device = /dev/nst1 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } # # Send all messages to the Director, # mount messages also are sent to the email address # Messages { Name = Standard director = backuphost-1-dir = all } bacula-fd.conf # # Default Bacula File Daemon Configuration file # # # List Directors who are permitted to contact this File daemon # Director { Name = backuphost-1-dir Password = "hahahahahaha" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = backuphost-1-mon Password = "hohohohohho" Monitor = yes } # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = backuphost-1-fd FDport = 9102 # where we listen for the director WorkingDirectory = /var/lib/bacula Pid Directory = /var/run/bacula Maximum Concurrent Jobs = 20 #FDAddress = 127.0.0.1 FDAddress = 0.0.0.0 } # Send all messages except skipped files back to Director Messages { Name = Standard director = backuphost-1-dir = all, !skipped, !restored }

    Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >