Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 632/1834 | < Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >

• Create a video stream from an image

  - by skerit

  I have a network camera that is only able to give me an image, not a video stream. In my home network this image is at http://192.168.1.16/loginfree.jpg I'm able to get this image a few times per second. I would now like to be able to serve it up as a video stream so I can use it in zoneminder. Any idea as to how I do that? I've messed around with named pipes and ffmpeg's image2pipe, but I can't get it to work properly.

  Read the article

• Windows Server 2003: Router, DHCP, Loses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server loses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• Oracle Solaris 11.1 available today

  - by user12611852

  Today Oracle is pleased to announce availability of Oracle Solaris 11.1. Download Solaris 11.1 Order Solaris 11.1 media kitExisting customers can quickly and simply update using the network based repository Highlights include: 8x faster database startup and shutdown and online resizing of the database SGA with a new optimized shared memory interface between the database and Oracle Solaris 11.1 Up to 20% throughput increases for Oracle Real Application Clusters by offloading lock management into the Oracle Solaris kernel Expanded support for Software Defined Networks (SDN) with Edge Virtual Bridging enhancements to maximize network resource utilization and manage bandwidth in cloud environments 4x faster Solaris Zone updates with parallel operations shorten maintenance windows New built-in memory predictor monitors application memory use and provides optimized memory page sizes and resource location to speed overall application performance. Learn more and share these valuable tools with your customers to enable them to move to Oracle Solaris 11.1 quickly. Many customers wait for the first update --now is the time to encourage them to install Oracle Solaris 11.1. Oracle Solaris 11.1 Data Sheet  What's New in Oracle Solaris 11.1 Oracle Solaris 11.1 FAQs Oracle Solaris 11 .1 Customer Presentation Oracle Solaris 11.1 is recommended for all SPARC T4 Systems and will soon be available preinstalled.

  Read the article

• Whats a good host for an active vBulletin site?

  - by Kyle

  I've been switching hosts using a VPS each time and I'm just really not sure I'm finding the right VPS's. I've used a VPS from burst.net & rubyringtech and I just feel like it's slowly killing my site because of the slow speed. I really don't know if it's the network or the VPS itself but I really wish to fix this. When I TOP into the VPS peak times it shows this: top - 03:18:56 up 16:33, 1 user, load average: 1.33, 1.40, 1.33 Tasks: 30 total, 1 running, 29 sleeping, 0 stopped, 0 zombie Cpu(s): 27.2%us, 13.6%sy, 0.0%ni, 59.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 679712k used, 368864k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached And pages take atleast a good 2-3 minutes to load. I have only like 50-60 members on the forum also. I had a shared hosting account and the forum was lightning fast.... Is a VPS a bad idea? :\ What should I do to fix this? I'm running lighttpd with xcache, and the latest mysql + php version. The server is a intel i7 2600 w/ 1gb uplink (I think the 1gb uplink is a lie because I've tested the network and the highest download speed I've seen was 20mb/s from a code.google page) All in all I've seen people talking about linode. Should I try them? I honestly don't need a dedicated server yet it's only 50-70 members online. What should I do? I really want a VPS because I enjoy root access. Does anyone have any suggestions?

  Read the article

• How to configure something like "Reflexive ACL" on OpenBSD?

  - by Earlz

  My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

  Read the article

• Computer Loses connection to router

  - by ajon

  I have a new Windows 8 Dell XPS desktop computer at work. It has a Dell Wireless 1703 802.11 b/g/n (2.4ghz) wireless adapter. sporadically throughout the day I lose internet connectivity. When I click on the wireless system tray icon, my companies router does not appear in the list. No other computer on the network is losing connection, only this one. I don't even know what to check. Could it be an ip conflict that causes me to get booted off? (I use DHCP), but why wouldn't my computer be able to see the network. The next time it happens I will see what happens when I try to access the router directly.

  Read the article

• Connection shortcut doesn't work at startup - Win 7

  - by kikio

  Hello. I want connect automatically to a network with a dial-up connection at windows startup. So after I created a new connection, I created a shortcut from this and placed it in "Startup" folder (at start menu). But after restart my system, windows 7 was coming up without start to connect to my network (that shortcut in startup didn't work!). but I placed a shortcut from Mozilla Firefox in startup folder for testing that, and it started at windows booting. My windows is WINDOWS 7 ULTIMATE. What can I do??? Please help me!!!

  Read the article

• VLSM help required

  - by user68062

  I have confused myself following a VLSM tutorial and need to get my understanding confirmed, would this be the correct format, or am i away off again 172.31.0.0 VLSM this network address for as many subnetworks as possible, with no more than 14 hosts in each subnetwork. Show the subnet mask used. As the ip address is class b and contains 16 bits in the network portion, this means that we can have 2^16 = 65536 possible networks, to give each of these networks a maximum of 14 hosts we would use the subnet prefix \28 for each subnet. Is this correct? Thanks BB

  Read the article

• Finding Locked Out Users

  - by Bart Silverstrim

  Active Directory up to 2008 network (our servers are a mix of 2008, 2003...) I'm looking for a quick way to query AD to find out what users are locked out, preferably from a batch or script file, to monitor for possible issues with either user accounts being attacked by an automated attack or just anomalies in the network. I've Googled and my Google-fu has failed; I found a query off Microsoft's own knowledgebase that cites a string to use on Server 2003 with the management snap-in's saved queries (http://support.microsoft.com/kb/555131) but when I entered it, the query returned 400 users that a spot-check showed did NOT have a checkmark in the "Account is locked out" box under "account." In fact, I don't see anything wrong with their accounts. Is there a simple utility (wisesoft bulkadusers apparently uses this method behind the scenes, since it's results were also wrong) that will give a count of users and possibly their user object names? Script? Something?

  Read the article

• VMware - Broadcom 1000Gbps NIC does not link at 100Mbps to a Cisco switch port

  - by Spirit

  Today we've stumbled on a very awkward situation with our VMWare Server. The server is with ESX 3.5 that has a 1Gbps NIC. We bought a brand new managed Cisco Linksys switch with 10/100Mbps interface ports but when we plugged the cable in one of the ports the link simply does not wanted to activate :S... Does anyone with more VMware experience have ever had similar problem? From what I know is that 1Gbps NICs are backwards compatible with 100Mbps switches. This is what we've tryed so far but with no success: Tryed: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 Tryed to modify the /etc/modules.conf folowing the guide from this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=813 After the changes I have restarted the networking services using # service network restart, # service mgmt-vmware restart and # service vmware-vpxa restart It seems that no matter how many times, or whatever approach/method (GUI or Shell) we try to change the speed and duplex of the network adapter and to force it to 100mbps it only accepts 1Gbps .. I am starting to go nuts :@

  Read the article

• Connecting desktop computer to the internet through laptop wifi

  - by Josh

  Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

  Read the article

• ssh into my mac from my ipod

  - by mechko

  Ok so this is what I got, but it don't look right... The set up is as follows: My Mac is on a wireless network, presumably behind a firewall over which I have no admin privileges. Further, said wireless network changes my internal IP randomly at random times, so I do not know what my ip is. Note that localhost is a variable ip I forward some port or the other to my dns: ssh -R 19999:localhost:22 sourceuser@remotehost connect to my remotehost from my machine: ssh sourceuser@remotehost and then connect to the port I forwarded: ssh localhost -p 19999 [solved] Second question, there are a bunch of ssh clients for the iphone. Which one should I use? EDIT: Since jailbreak is not illegal, simply frowned upon by the Corporation, I've decided to go with that. I have a nice shell with openssh and the works. Best of all, it's free and it does exactly what you expect.

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• Why are the external IP of my router not the same as the external IP of my computer

  - by Martin

  I have a standard network setup where all my network devices, both WIFI and ethernet, are connected to the same router. Lately, however, I've been experiencing some very strange behavior. It started as a simple connecting error, when I tried to reach an FTP server using the external IP. Of course I went right into one of those CheckMyIP sites, to double check the IP and it turned out to be correct. Then I went into my router setup, which is through a tool called aiport-tool, because I have an Apple Aiport Extreme router. Turns out the router displays a different external IP, and for some reason that external IP works when I try to access the FTP server. Can anyone explain what is going on? Why are the devices connected to the router displaying an incorrect external IP? BTW i have no VPN/proxy setups on any of my devices.

  Read the article

• afp/smb transfers caps at 2 megabytes/sec, wireless N

  - by RD.

  I wanted to transfer files between two mac computers. The network is wireless-N and both computers have wireless-N modules in them. The problem is that when I transfer files between them, via file sharing (afp) the network speed caps at 2 megabytes/sec. Just downloading files from the internet I can get faster speeds, so this isn't a constriction of my wifi bandwidth, it appears to be a constriction of the protocol being used. My wifi-n is set to 130mbits, so I should see real world transfer speeds around 12-16 megabytes/sec I did this command on both computers sudo sysctl -w net.inet.tcp.delayed_ack=0 which is supposed to lower tcp overhead, but this did not affect it. How can I get the speed I am expecting?

  Read the article

• dig gets the right result from DNS server, but name still fails to resolve

  - by EMiller

  Under what conditions would the following occur? From a given OSX machine on an internal network: $~ cat /etc/resolv.conf nameserver 10.102.120.7 nameserver 10.102.120.2 From the same machine: $~ dig @10.102.120.7 in.local <snip> ... ;; QUESTION SECTION: ;in.local. IN A ;; ANSWER SECTION: in.local. 43200 IN A 10.102.123.30 <snip> ... And yet, this workstation cannot ping in.local, nor load pages hosted by apache on that machine. 10.102.123.30 is definitley up (2 OSX machines I know fail to resolve in.local - but other machines on the network can). I have also checked their /etc/hosts to see if anything there might interfere... Not sure what else to check...

  Read the article

• Hardware issues on Samsung NF208 (NF210)

  - by KristoferA - Huagati.com

  I'm trying to get Ubuntu 10.10 running on my wife's Samsung NF208 (same spec as NF210, but shipped without OS), and I have run into a pile of problems: At first, there were problems with audio, display brightness, and WiFi, so I reinstalled Ubuntu from scratch. After reinstalling, the audio has started working but the WiFi loses network access all the time and then it takes 5-10 minutes for it to reconnect to the network. Also, display brightness is at its lowest. I have tried to use the brightness command but it won't run. Is this system utterly incompatible with Ubuntu, or are there working WiFi and display drivers for it somewhere? I have googled for days but haven't found anything useful. Help me. Update: I never got it working properly. I came across lots of useful tips and tricks over at the forum linked to in the accepted answer but I just wasn't able to get it working and stable enough for the intended use. Hopefully a future version of Ubuntu and/or the samsung tools will solve that. Related thread over at the other forum: http://www.voria.org/forum/viewtopic.php?f=3&t=682

  Read the article

• Why can't I view a specific websites?

  - by user79263

  I am a netwrok administrator at a small company (22 PC) and i have a problem, and i don't know which could be the cause. I can't access a specific website from the LAN. I have a server which has 2 NICs(one to ISP and one to LAN). I have installed on the server (Bind DNS server and DHCP server) Debian 6 Server. I want to mention that "nslookup mcel.co.mz", and "dig my_site" is not working perfectly, I can't access the site from inside the LAN. I can't send emails to person that are located in that domain. When I dig mcel.co.mz @8.8.8.8 the domain is resolved. Why can't I view a specific websites? www.mcel.co.mz Why can't send email to person that are on some domains? @mcel.co.mz I don't have any rule configured in Debian Server which wouldn't let me acces the site. I am the only one responsable with the IT department. Lowly,

  Read the article

• What happens when router has been set to incorrect time?

  - by iamrohitbanga

  I have a D-Link router for my home Wi-Fi network. Everyday at least once the internet suddenly goes down. I am simply not able to connect to the Wi-Fi network. If I just restart the router, it starts working. To debug the issue I logged into the admin panel and noticed the time was set to something in 2002. I have set it to the correct time. Will wait to see if that fixes the problem. In the meanwhile I want to know what can go bad when the router has been set to show an incorrect time? What are the kinds of problems expected? My Wi-Fi was working just fine most of the time, but sometimes it lost the connection. Could this be linked to the incorrect time setting?

  Read the article

• Hopping a VPN Tunnel

  - by lellouch

  My central office and remote offices are connected to each other over site to site ipsec vpn. We use Fortigate firewalls and everything is working fine. On the other hand, only central office is also connected to another company's network over ipsec vpn as well. In this situation, everything is also fine and employees at the central office is able to reach the other company's resources without problem. Now i want the employees working on our remote office can reach the other company's network over central office without creating new vpn tunnels. http://imgur.com/ozrXfGv How can i do that? Thanks for your answers in advance.

  Read the article

• How to route local traffic over switch?

  - by Franz Kafka

  I'm just cabled up at home but haven't got any way of verifying that gigabit speed can be reached. As I've only got one laptop with one network card, one cable, and one switch, I'm kind of stuck. I'm using a tool that you can start as a server or as a client to send data from one box to another. I would like to send and receive on the same Windows box. I guess if I use my network local IP address, my Windows 8.1 PC will just route traffic internally. Is there some way of forcing the traffic to go to the switch and back again?

  Read the article

• Windows 7, connecting to Samba shares

  - by Colin Pickard

  How can I connect to a Samba share with authentication using Windows 7? We have a bunch of Linux, HP-UX and AIX servers on our network with folders shared using Samba. These are not connected to our Active Directory or anything, we just type a user name and password when we connect to them. They still all work fine from Windows XP, but we've upgraded a couple of machines to Windows 7 and they can't access the shares. You get prompted for a password but it says "The specified network password is incorrect" (it's not).

  Read the article

• virtual hosts on lighttpd can't load

  - by Jake

  Thats what I did: Added following code to lighttpd.conf $HTTP["host"] =~ "(^|\.)test\.com$" { server.document-root = "/home/test" } created /home/test Restarted Lighttpd but it doesn't load anything Google chrome Error: No data received Unable to load the webpage because the server sent no data. Here are some suggestions: Reload this webpage later. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. Firefox: The connection was reset The connection to the server was reset while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. can you please explain How can I fix this? Really Thanks

  Read the article

< Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >