Search Results

Search found 877 results on 36 pages for 'sector financiero'.

Page 8/36 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Transition from web-app development to telecom Integration network (IN) layer development

  - by SIJAR

  How difficult it is for someone who has developed web-application using J2EE, Spring etc technology to develop an application for Telecommunication Integration network (IN) layer, the telecom product is to be developed using SS7 stack, JAIN API, J2EE technology. How vital is the knowledge of telecommunication sector? Does anyone anticipate growth in telecommunication sector, what future lies for web development?

  Read the article

• Does a 3ware "ECC-ERROR" matter on a JBOD when I have ZFS?

  - by Stefan Lasiewski

  I have a FreeBSD 8.x machine running ZFS and with a 3ware 9690SA controller. The 3ware controller shows an ECC-ERROR with one of the disks: //host> /c0 show VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 279.39 GB SAS 0 - SEAGATE ST3300657SS p1 OK u0 279.39 GB SAS 1 - SEAGATE ST3300657SS p2 OK u1 931.51 GB SAS 2 - SEAGATE ST31000640SS p3 ECC-ERROR u2 931.51 GB SAS 3 - SEAGATE ST31000640SS p4 OK u3 931.51 GB SAS 4 - SEAGATE ST31000640SS /c0 show events shows no ECC errors in it's recent history. ZFS does not currently detect any errors. zpool status says No known data errors My question: Is this ECC-ERROR something that I need to be concerned about? According to the 3ware CLI 9.5.2 Manual, an ECC-ERROR means that the 3ware controller caught a read-error for one or more sectors on this drive. This sometimes occurs when a RAID array is recovering from a failed disk. I believe that ECC-ERRORS can also be detected when the 3ware Controller verifies each disk. None of the drives have failed and thus there was no drive rebuild, so I assume that 3ware discovered a bad sector when it ran it's weekly auto-verify scan of the disks. Is this a safe assumption? According to our logs, ZFS has not detected any bad sectors on this drive. ZFS can work around read errors -- if ZFS detects a bad sector on the drive, it will simply mark that sector as bad and never use it again. From the ZFS perspective one bad sector isn't a big deal, although it might indicate that the drive is starting to go bad.

  Read the article

• Hard drive had reallocated sectors...but now it magically doesn't! Can I trust it?

  - by rob

  Last week my SMART diagnostics utility, CrystalDiskInfo, reported that the external hard drive that I was saving my backups to had suddenly reported 900+ reallocated sectors. I double-checked to confirm, then ordered a replacement drive. I spent all of this week copying data from that drive to the new drive. But toward the end of the copy, something peculiar happened. CrystalDiskInfo popped up an alert that the reallocated sector count had gone back down to 0. I know that when SMART detects a read error on a block, it adds that block to the current pending reallocation list. If it subsequently is successfully written or read later, it is removed from the list and assumed to be fine, but if a subsequent write fails, it is marked bad and added to the reallocated sector count. What concerns me most is that I've never read anywhere that a sector can be recovered as "good" after it has been marked as a bad sector and remapped. I've just finished running an extended SMART diagnostic, and it found no surface errors. Now I'm doubtful that the manufacturer will honor a warranty claim if the SMART info does not report any problems. Has anyone had this happen? If so, then is the drive, indeed, okay, or should I be concerned about an imminent failure?

  Read the article

• Formatting an external HDD stuck at 70%

  - by mahmood

  My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

  Read the article

• Finding a shared HDD attached to the network from my F-13 machine

  - by Ramy

  Sorry for the slew of n00bie questions, but here is one more. I recently partitioned my 1.5TB harddrive according to this question I then bought this to attach the harddrive to my network. The problem is, how do I navigate to the hard drive to move files over the network to the HDD. should this be moved to serverfault? update: the disk isn't even showing up when i call "fdisk -l" (as root). How can I mount it if I can't even find it? [root@Moonface ~]# /sbin/fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00018598 Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 19458 155777024 8e Linux LVM Disk /dev/dm-0: 53.7 GB, 53687091200 bytes 255 heads, 63 sectors/track, 6527 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 4764 MB, 4764729344 bytes 255 heads, 63 sectors/track, 579 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table Disk /dev/dm-2: 101.0 GB, 101032394752 bytes 255 heads, 63 sectors/track, 12283 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-2 doesn't contain a valid partition table

  Read the article

• Damaged partition after disk image

  - by Charles Gargent

  I am trying to clone/backup a disk with Windows 7 Pro 64bit on it. First I tried Easus Todo Backup and used disk clone option without sector by sector copy. I then plugged in the new drive and I get the following error. "Invalid or damaged Bootable partition" I then plugged the old drive back in and I am greeted with the same error. My next step was to try the sector by sector disk clone, but still I get the same error. I have tried fixing the mbr with the windows disk but that makes no difference. I have tried some other free tools and I get the same error. I have tried this on a different machine running Windows 7 Enterprise 32bit without this problem. I have done some searching and the only thing I can come up with is this post from the Acronis forums http://forum.acronis.com/forum/8254 suggesting that the bios is reading my disk geometry incorrectly. Can anyone shed any light on this, is there a way I can fix this either in the bios or repair the mbr every time I reimage it?

  Read the article

• How to best convert a fully encrypted drive into a Virtual Machine?

  - by SiegeX

  I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

  Read the article

• LVM and cloning HDs

  - by jcea

  Using Linux, I have several backup levels. One of them is a periodical sector by sector copy (using dd) of my laptop harddisk to an external USB disk. Yes, I have other backups too, like remote rsync. This approach (the disk dd) is OK when cloning a HDD with no LVM volumes, since I can plug the external disk anytime and mount the partitions simply mounting /dev/sdb* instead of /dev/sda*. Trivial and handy. Today I moved ALL my harddisk (including the /boot) to LVM. Everything works fine. I will stress it for a couple of days, and then I will do a sector by sector copy to my external harddisk. Now I have a problem, I guess. If in the future I plug the external USB HDD to recover any file, the OS will detect a duplicate LVM configuration, with the same name and the same UUID. Even doing a vgrename (which LVM would be renamed, the internal HDD or the external HDD?), the cloned UUID will not change. Is there any command to change name and UUID? Ideally I would clone the HDD and then change the LVM group name and its UUID, but I don't know how to do it. Another related issue would be... In the past I have booted my laptop using the external disk, using the BIOS boot menu and changing GRUB entries manually to boot from /dev/sdb instead of /dev/sda. But now my current GRUB configuration boots directly from a LVM logical volume, something like: set root='(LVM-root)' in my grub.cfg. So... What is going to happen with duplicated volumes? Any suggestion? I guess I could repartition my external harddisk and change backup strategy from dd to rsync, but this disk has windows installed too, and I really would like to have a physical "real" copy.

  Read the article

• Thecus N5200, disk has dropped out of RAID5

  - by Anders Ekdahl

  We have a Thecus 5200 NAS here at work with five WD Caviar Black 2TB disks in a RADI5 array. Yesterday, disk 4 dropped out of the array, and in the NAS web interface there's a warning about the RAID array being "degraded". When I go into Storage - Disks, disk 1 and 4 has a warning next to them. When I click on the warnings, this information about the disks are displayed: Tray Number 4 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 34 Reallocated Sector Count 66 Current Pending Sector 1447 Raw Read Error Rate 61 Seek Error Rate 0 Hardware ECC Recovered N/A Tray Number 1 Model WD2001FASS-00W2B Power On Hours 2403 Hours Temperature Celsius 32 Reallocated Sector Count 0 Current Pending Sector 1465 Raw Read Error Rate 0 Seek Error Rate 0 Hardware ECC Recovered N/A I'm not really an expert on either disks or RAID arrays. Does this indicate that the fourth disk is damaged, and needs to be replaced? And what about disk number one? It has a warning, but it's still in the array. Is it safe to add the fourth disk back into the array as a spare? I can't find any way to add it back as a it were before.

  Read the article

• Allignment of ext3 partition on LVM RAID volume group

  - by John P

  I'm trying to add a partition on a LVM that resides on a RAID6 volume group and fdisk is complaining about the partition not residing on a physical sector boundry. My question is, how do you calculate the correct starting sector for a partition on a LVM? This partition will be formated ext3. Would it be better to just format the LVM directly instead of creating a new partition? Disk /dev/dedvol/backup: 2199.0 GB, 2199023255552 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 1048576 bytes / 8388608 bytes Disk identifier: 0x4e428f49 Device Boot Start End Blocks Id System /dev/dedvol/backup1 63 267349 2146982827+ 83 Linux Partition 1 does not start on physical sector boundary. lvdisplay /dev/dedvol/backup --- Logical volume --- LV Name /dev/dedvol/backup VG Name dedvol LV UUID OV2n5j-7LHb-exJL-t8dI-dU8A-2vxf-uIicCt LV Write Access read/write LV Status available # open 0 LV Size 2.00 TiB Current LE 524288 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 32768 Block device 253:1 vgdisplay dedvol --- Volume group --- VG Name dedvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 14.55 TiB PE Size 4.00 MiB Total PE 3815448 Alloc PE / Size 3670016 / 14.00 TiB Free PE / Size 145432 / 568.09 GiB VG UUID 8fBcOk-aXGx-P3Qy-VVpJ-0zK1-fQgy-Cb691J

  Read the article

• unable to recover data from failed hdd

  - by Eslam Elyamany

  my hdd failing (or maybe totally dead) i've connected the hdd via USB but it doesn't appear in fdisk Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xe9fb38fb Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 40959999 20376576 7 HPFS/NTFS/exFAT /dev/sda4 40962046 976771071 467904513 5 Extended Partition 4 does not start on physical sector boundary. /dev/sda5 82913280 86910975 1998848 82 Linux swap / Solaris /dev/sda6 86913024 394113023 153600000 7 HPFS/NTFS/exFAT /dev/sda7 40962048 82913279 20975616 83 Linux /dev/sda8 394122708 976768064 291322678+ 7 HPFS/NTFS/exFAT Partition 8 does not start on physical sector boundary. no sdc appears here , BUT it's appears on /dev/ rootghost-lap:/home/ghost# ls /dev/sd* /dev/sda /dev/sda2 /dev/sda5 /dev/sda8 /dev/sdb /dev/sdc1 /dev/sdc2 /dev/sdc6 /dev/sdc8 /dev/sda1 /dev/sda4 /dev/sda6 /dev/sda9 /dev/sdc /dev/sdc10 /dev/sdc5 /dev/sdc7 /dev/sdc9 also it appears in proc Code: rootghost-lap:/home/ghost# cat /proc/partitions major minor #blocks name 8 0 488386584 sda 8 1 102400 sda1 8 2 20376576 sda2 8 4 1 sda4 8 5 1998848 sda5 8 6 153600000 sda6 8 8 291322678 sda8 8 9 20975616 sda9 11 0 1048575 sr0 11 1 99136 sr1 8 32 244198583 sdc 8 33 14651248 sdc1 8 34 1 sdc2 8 37 15380480 sdc5 8 38 4153344 sdc6 8 39 48829536 sdc7 8 40 48829536 sdc8 8 41 110374551 sdc9 8 42 1975963 sdc10 and dmesg : [10604.777168] end_request: I/O error, dev sdc, sector 1 [10604.817238] sd 26:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [10604.817243] sd 26:0:0:0: [sdc] Sense Key : Aborted Command [current] [10604.817248] sd 26:0:0:0: [sdc] Add. Sense: No additional sense information [10604.817253] sd 26:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 02 00 00 06 00 ok now , let's see what i've tried testdisk to check for partitions -- failed dd to copy data from /dev/sdcX -- provide strange output size for example /dev/sdc1 is about 15G , the output for dd is 62G+ so i had to cancle it safecopy successfully made an image for partitons , but can't fix images, can't mount it, can't do any thing with it and some other tools i've tried and all failed , so any idea ?

  Read the article

• Windows 7 boots to black screen with blinking cursor

  - by murgatroid99

  I have an Alienware M17x that dual boots into Ubuntu 11.04 and Windows 7 Home Premium. Currently, the computer starts at the GRUB loader and will boot into Ubuntu, but if I try to boot into Windows, I immediately get a black screen with a blinking cursor in the upper left corner. The output of fdisk -l is Device Boot Start End Blocks Id System /dev/dm-0p1 1 5 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/dm-0p2 6 1918 15360000 7 HPFS/NTFS Partition 2 does not start on physical sector boundary. /dev/dm-0p3 * 1918 64772 504878877+ 7 HPFS/NTFS Partition 3 does not start on physical sector boundary. /dev/dm-0p4 64772 77827 104858625 5 Extended Partition 4 does not start on physical sector boundary. /dev/dm-0p5 64772 67204 19531008 83 Linux /dev/dm-0p6 67204 74498 58593536 83 Linux /dev/dm-0p7 74498 77577 24731648 83 Linux /dev/dm-0p8 77578 77827 2000128 82 Linux swap / Solaris I have used the Windows rescue CD, and run the automatic error fixer until it finds no errors. I have run chkdsk /R on both the main Windows 7 (/dev/dm-0p3) partition and the recovery partition (/dev/dm-0p2). I set the main Windows 7 partition to be active. I also tried running in the recovery console the commands bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd None of these helped and the last set of commands deletes grub, which I then have to reinstall from Ubuntu. I think the last thing I did in windows before this started was install the newest ATI driver for my video card. This would suggest using system restore, and I actually had a restore point earlier (after the problem started), but after whatever I did that restore point does not appear in the list on the recovery disk any more, so I cannot do a system restore. Is there anything else I can try to make Windows boot properly again? Edit: Running the suggested commands bootsect /nt60 c: bcdboot c:\windows /s c: was also ineffective.

  Read the article

• Hard Disk Not Counting Reallocated Sectors

  - by MetaNova

  I have a drive that is reporting that the current pending sectors is "45". I have used badblocks to identify the sectors and I have been trying to write zeros to them with dd. From what I understand, when I attempt writing data directly to the bad sectors, it should trigger a reallocation, reducing current pending sectors by one and increasing the reallocated sector count. However, on this disk both Reallocated_Sector_Ct and Reallocated_Event_Count raw values are 0, and dd fails with I/O errors when I attempt to write zeros to the bad sectors. dd works fine, however, when I write to a good sector. # dd if=/dev/zero of=/dev/sdb bs=512 count=1 seek=217152 dd: error writing ‘/dev/sdb’: Input/output error Does this mean that my drive, in some way, has no spare sectors to be used for reallocation? Is my drive just in general a terrible person? (The drive isn't actually mine, I'm helping a friend out. They might have just gotten a cheap drive or something.) In case it is relevant, here is the output of smartctl -i : Model Family: Western Digital Caviar Green (AF) Device Model: WDC WD15EARS-00Z5B1 Serial Number: WD-WMAVU3027748 LU WWN Device Id: 5 0014ee 25998d213 Firmware Version: 80.00A80 User Capacity: 1,500,301,910,016 bytes [1.50 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 18 17:47:29 2013 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled UPDATE: I have run shred on the disk, which has caused Current_Pending_Sector to go to zero. However, Reallocated_Sector_Ct and Reallocated_Event_Count are still zero, and dd is now able to write data to the sectors it was previously unable to. This leads me with several other questions: Why aren't the reallocations being recored by the disk? I'm assuming the reallocation took place as I can now write data directly to the sector and couldn't before. Why did shred cause reallocation and not dd? Does the fact that shred writes random data instead of just zeros make a difference?

  Read the article

• disk partition centos

  - by FlourishDNA

  I am setting up server for hosting two WordPress which has size of around 70GB. I have already installed CentOS as OS and I would like to partition the Disk. Is there any tool which can help me or can someone guide me though the process as I am not expert is SSH commands. Here are some output that might help. OS: CentOS release 6.3 fdisk -l Disk /dev/xvdb: 214.7 GB, 214748364800 bytes 255 heads, 63 sectors/track, 26108 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b91e0 Device Boot Start End Blocks Id System Disk /dev/xvda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e542c Device Boot Start End Blocks Id System /dev/xvda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvda2 64 2611 20458496 8e Linux LVM Disk /dev/mapper/vg_flourish-lv_root: 16.7 GB, 16718495744 bytes 255 heads, 63 sectors/track, 2032 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_flourish-lv_swap: 4227 MB, 4227858432 bytes 255 heads, 63 sectors/track, 514 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 df Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/vg_flourish-lv_root 16070076 758184 14495560 5% / tmpfs 958500 0 958500 0% /dev/shm /dev/xvda1 495844 31926 438318 7% /boot df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_flourish-lv_root 16G 741M 14G 5% / tmpfs 937M 0 937M 0% /dev/shm /dev/xvda1 485M 32M 429M 7% /boot Thanks

  Read the article

• Fixing damaged partition table

  - by dr4cul4

  This is continuation of Recover Extended Partition , but this time I have different problem related partition table it self. I managed to restore partition that I needed and backed up files that were crucial to me (at least those that I had space to store somewhere) OK now get to the problem. My partition table is corrupted, booting RIP Linux I can mount it in truecrypt (and other ones that recovered), but that's basically it. When I launch GParted I have unallocated drive. GParted Dev info: Device Information Model: ATA ST2000DL003-9VT1 Size: 1.82TiB Path: /dev/sda Partition table: unrecognized Heads: 255 Sectors/track: 63 Cylinders: 243201 Total Sectors: 3907029168 Sector size: 512 When I check information on unallocated space I get: File system: unallocated Size: 1.82TiB First sector: 0 Last sector: 3907029167 Total sectors: 3907029168 Warning: Can't have a partition outside the disk! Now the output of testdisc (Analyze): TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Partition Start End Size in sectors > 1 P Linux 13132 242 39 16353 233 8 51744768 2 E extended LBA 16807 223 1 243201 254 63 3637021626 No partition is bootable 5 L Linux 16807 223 57 20430 39 25 58191872 X extended 20430 70 1 243201 78 13 3578816632 Invalid NTFS or EXFAT boot 6 L HPFS - NTFS 20430 71 58 243201 78 13 3578816512 6 LNext Now fdisk: # fdisk -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00039cd0 Device Boot Start End Blocks Id System /dev/sda1 210980864 262725631 25872384 83 Linux /dev/sda2 270018504 3907040129 1818510813 f W95 Ext'd (LBA) /dev/sda5 270018560 328210431 29095936 83 Linux /dev/sda6 328212480 3907028991 1789408256 7 HPFS/NTFS/exFAT Now I would like to fix that to arrange partitions correctly, but I have no idea which tool is capable of fixing that (tried, a few, some of them offered fixing, but it was to risky at the moment - still backing up data).

  Read the article

• Failure connecting to Dell MD3200i from XenServer 6.2 pool

  - by Tom Sparrow

  This question also asked at Citrix Forums http://forums.citrix.com/thread.jspa?threadID=332289 I have a MD3200i that is currently working fine with my Xen5.6 pool, but I cannot get a connection to the new 6.2 pool to work. I previously had a problem with a 6.0 upgrade (which is why the old pool is still on 5.6), but rolled back rather than fix it as it wasn't urgent at the time. This install is on new machines - I tried 6.1 first (which had the same problems) then 6.2 was released the second day after installation so I switched to that. I've not installed anything from the Dell resource DVD at this point - I can't find anything saying I should, and everything I have read suggests it shouldn't be necessary. I can ping all 8 ip addresses from both servers in the pool, iscsiadm -m discovery works fine, I can login to the nodes and iscsiadm reports the sessions active correctly. I've added the required sections to multipath.conf, but multipath -ll reports DM multipath kernel driver not loaded immediately after boot. The following is a log of a test session immediately after boot. root@xen3 ~]# iscsiadm -m node --loginall=all Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.101,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.101,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.104,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.102,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.103,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.104,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.102,3260] Logging in to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.103,3260] Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.101,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.101,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.104,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.102,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.103,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.104,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.130.102,3260]: successful Login to [iface: default, target: iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91, portal: 192.168.131.103,3260]: successful [root@xen3 ~]# iscsiadm -m session tcp: [1] 192.168.130.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [2] 192.168.131.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [3] 192.168.131.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [4] 192.168.131.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [5] 192.168.130.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [6] 192.168.130.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [7] 192.168.130.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [8] 192.168.131.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 [root@xen3 ~]# service multipathd restart ok Stopping multipathd daemon: [ OK ] Starting multipathd daemon: [ OK ] [root@xen3 ~]# multipath Jul 04 09:58:47 | DM multipath kernel driver not loaded Jul 04 09:58:47 | DM multipath kernel driver not loaded [root@xen3 ~]# multipath -ll Jul 04 09:59:03 | DM multipath kernel driver not loaded Jul 04 09:59:03 | DM multipath kernel driver not loaded [ root@xen3 ~]# modprobe dm_multipath [root@xen3 ~]# multipath Jul 04 10:19:50 | 36b8ca3a0e7024800194a0bd11891cd14: ignoring map create: 1Dell_Internal_Dual_SD_0123456789AB undef Dell,Internal Dual SD size=1.9G features='0' hwhandler='0' wp=undef `-+- policy='round-robin 0' prio=1 status=undef `- 7:0:0:0 sdb 8:16 undef ready running [root@xen3 ~]# multipath -ll 1Dell_Internal_Dual_SD_0123456789AB dm-1 Dell,Internal Dual SD size=1.9G features='0' hwhandler='0' wp=rw `-+- policy='round-robin 0' prio=1 status=enabled `- 7:0:0:0 sdb 8:16 active ready running [root@xen3 ~]# iscsiadm -m session tcp: [1] 192.168.130.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [2] 192.168.131.101:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [3] 192.168.131.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [4] 192.168.131.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [5] 192.168.130.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [6] 192.168.130.104:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [7] 192.168.130.102:3260,2 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 tcp: [8] 192.168.131.103:3260,1 iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 [root@xen3 ~]# dmesg | tail -n 50 [ 1161.881010] sd 8:0:0:0: [sdf] Unhandled error code [ 1161.881013] sd 8:0:0:0: [sdf] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881017] sd 8:0:0:0: [sdf] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881024] end_request: I/O error, dev sdf, sector 0 [ 1161.881031] Buffer I/O error on device sdf, logical block 0 [ 1161.881045] sd 15:0:0:0: [sdi] Unhandled error code [ 1161.881048] sd 15:0:0:0: [sdi] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881052] sd 15:0:0:0: [sdi] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881058] end_request: I/O error, dev sdi, sector 0 [ 1161.881065] Buffer I/O error on device sdi, logical block 0 [ 1161.881122] sd 9:0:0:0: [sdg] Unhandled error code [ 1161.881124] sd 9:0:0:0: [sdg] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1161.881126] sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1161.881132] end_request: I/O error, dev sdg, sector 0 [ 1161.881140] Buffer I/O error on device sdg, logical block 0 [ 1168.220951] connection6:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220957] connection7:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220967] connection7:0: detected conn error (1011) [ 1168.220969] connection4:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220973] connection4:0: detected conn error (1011) [ 1168.220975] connection3:0: ping timeout of 15 secs expired, recv timeout 10, last rx 84060, last ping 85060, now 86560 [ 1168.220978] connection3:0: detected conn error (1011) [ 1168.220985] connection6:0: detected conn error (1011) [ 1168.480994] sd 14:0:0:0: [sde] Unhandled error code [ 1168.480998] sd 14:0:0:0: [sde] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481001] sd 14:0:0:0: [sde] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481009] end_request: I/O error, dev sde, sector 0 [ 1168.481015] Buffer I/O error on device sde, logical block 0 [ 1168.481076] sd 11:0:0:0: [sdc] Unhandled error code [ 1168.481078] sd 11:0:0:0: [sdc] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481080] sd 11:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481087] end_request: I/O error, dev sdc, sector 0 [ 1168.481092] Buffer I/O error on device sdc, logical block 0 [ 1168.481144] sd 10:0:0:0: [sdd] Unhandled error code [ 1168.481147] sd 10:0:0:0: [sdd] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481150] sd 10:0:0:0: [sdd] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481156] end_request: I/O error, dev sdd, sector 0 [ 1168.481163] Buffer I/O error on device sdd, logical block 0 [ 1168.481168] sd 13:0:0:0: [sdj] Unhandled error code [ 1168.481170] sd 13:0:0:0: [sdj] Result: hostbyte=DID_TRANSPORT_DISRUPTED driverbyte=DRIVER_OK [ 1168.481172] sd 13:0:0:0: [sdj] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 1168.481178] end_request: I/O error, dev sdj, sector 0 [ 1168.481184] Buffer I/O error on device sdj, logical block 0 [ 1457.105996] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1457.106155] device-mapper: multipath: Cannot access device path 8:0: -16 [ 1457.106164] device-mapper: table: 252:1: multipath: error getting device [ 1457.106172] device-mapper: ioctl: error adding target to table [ 1457.171292] device-mapper: multipath: Cannot access device path 8:0: -16 [ 1457.171299] device-mapper: table: 252:1: multipath: error getting device [ 1457.171304] device-mapper: ioctl: error adding target to table [root@xen3 ~]# fdisk -l Disk /dev/sda: 299.4 GB, 299439751168 bytes 255 heads, 63 sectors/track, 36404 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 de Dell Utility /dev/sda2 * 6 528 4194304 83 Linux Partition 2 does not end on cylinder boundary. /dev/sda3 528 1050 4194304 83 Linux /dev/sda4 1050 36404 283986359+ 8e Linux LVM Disk /dev/sdb: 2040 MB, 2040528896 bytes 255 heads, 63 sectors/track, 248 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 248 1992028+ 83 Linux Disk /dev/dm-1: 2040 MB, 2040528896 bytes 255 heads, 63 sectors/track, 248 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/dm-1p1 1 248 1992028+ 83 Linux [root@xen3 ~]# xe sr-probe type=lvmoiscsi device-config:target=192.168.130.101 device-config:targetIQN=iqn.1984-05.com.dell:powervault.md3200i.6782bcb0006bd850000000004ed88b91 Error code: SR_BACKEND_FAILURE_107 Error parameters: , The SCSIid parameter is missing or incorrect, <?xml version="1.0" ?> <iscsi-target/> Note: the xml ends there correctly on the last line - it doesn't ever return a list of LUNs (and there is one in the group on the SAN for those servers.

  Read the article

• Recover lost NTFS partition on SSD

  - by Emil

  Hello, About 2 month ago I upgraded my Dell Latitude E6500 laptop with a Corsair Force F120 SSD drive. Everything worked well until about a week or so back. I started the computer and was faced with a beep and a message saying "No boot sector on Internal HDD (IRRT). No bootable devices". Since I figured that the boot sector had somehow got corrupt I tried booting from the Windows 7 dvd in order to repair the boot sector. But the Windows 7 installation program only found a blank drive with 111GB of unallocated space. I panicked and brought the drive with me to work to let a colleague have a look at it. We made a disk image of the entire drive and ran the drive through Testdisk in Linux. Testdisk did not find any partitions. It appears that the drive has been completely erased... What has happened? What is causing this behavior on an SSD?

  Read the article

• How to backup boot information of a PC's Hard Disk?

  - by Bear Bear

  I just installed Windows 7 on a partition of my hard disk and I'm planning to install Vista and Windows 8 on other partitions on the same disk, and maybe a few Linux distributions too. Before I install other Operating Systems, I would like to backup the boot information, just to make sure I can get back to Windows 7 in case anything goes wrong with the booting data. I already made a backup of the MBR using MBRFix but I'm wondering if I should save some Boot Sector from the Windows 7 partition? I noticed that Windows Vista install DVD has a "bootrec.exe" utility in the recovery console (Shift+F10) and it has some options to rewrite the boot sector of the partitions. Therefore I wonder if there is any utility (preferably on Hiren's BootCD) to backup/write the boot sector I would also like to know how to backup the boot data of a Linux installation

  Read the article

• How do boot sectors and multiple drives works?

  - by GiH

  I don't fully understand the concept of a boot sector, I was hoping someone could clear this up for me. If you have two hard drives, with an OS installed on each, does each drive have its own boot sector? Does each drive need an MBR partition? I've got Linux and Windows on two separate drives. I've had issues when installing Linux and grub, and now I've finally decided to use the Windows bootloader to start up. Would Windows have gotten rid of grub when i used /fixmbr or does it stay there on the boot sector of the other drive?

  Read the article

• Do I have a bad SD card?

  - by User1

  I'm trying to copy data from my computer to an SD card. After a few hundred megs, I keep getting the following errors in dmesg: [34542.836192] end_request: I/O error, dev mmcblk0, sector 855936 [34542.836284] FAT: unable to read inode block for updating (i_pos 13694981) [34542.836306] MMC: killing requests for dead queue [34542.836310] end_request: I/O error, dev mmcblk0, sector 9280 [34542.837035] FAT: unable to read inode block for updating (i_pos 148486) [34542.837062] MMC: killing requests for dead queue [34542.837066] end_request: I/O error, dev mmcblk0, sector 1 [34542.837074] FAT: bread failed in fat_clusters_flush [34542.837085] MMC: killing requests for dead queue These were all files I copied from a smaller SD card. I just want to transfer them to my new, larger card for my phone. I tried the same experiment with different files on a different machine and the card failed again. Reading data from the old card went fine. My systems are older and the new SD card is new (16GB Class 4). Could this be that my computers are too old? Is there a definitive test to verify if my SD card is bad?

  Read the article

• How do I mount a "DiskSecure Multiboot" partition?

  - by ????

  For a hard drive that has 4 or 5 partitions, I was able to mount one of them using Ubuntu LiveCD: sudo mount /dev/sda1 /mnt but is there a way to mount to the other partitions? (if using sudo fdisk -l, it only shows /dev/sda) GParted's snapshot is: Right now, the fdisk info is as follows: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1aca8ea5 Device Boot Start End Blocks Id System /dev/sda1 284993226 350602558 32804666+ 7 HPFS/NTFS/exFAT and then ubuntu@ubuntu:/mnt$ sudo fdisk -l /dev/sda1 Disk /dev/sda1: 33.6 GB, 33591978496 bytes 255 heads, 63 sectors/track, 4083 cylinders, total 65609333 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2052474d This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sda1p1 ? 6579571 1924427647 958924038+ 70 DiskSecure Multi-Boot /dev/sda1p2 ? 1953251627 3771827541 909287957+ 43 Unknown /dev/sda1p3 ? 225735265 225735274 5 72 Unknown /dev/sda1p4 2642411520 2642463409 25945 0 Empty Partition table entries are not in disk order Per @lgarzo's request, parted info is: ubuntu@ubuntu:/mnt$ sudo parted /dev/sda print Model: ATA ST3320820AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 146GB 180GB 33.6GB primary ntfs boot The command sudo mount /dev/sda1p2 /mnt won't work.

  Read the article

• How to format FAT32 filesystem infected with windows virus and that is write protected

  - by explorex

  Hi, I have a pendrive with FAT32 filesystem. it is infected with virus dont know which but has autorun.inf and create exe file within folder. I tried to format it with various filesystems and even try to delete it with GParted but couldn't because it says it is write protected i can't even delete files. How to format it? user@explorerx:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbd04bd04 Device Boot Start End Blocks Id System /dev/sda1 * 1 498 3998720 82 Linux swap / Solaris Partition 1 does not end on cylinder boundary. /dev/sda2 499 19457 152287585+ f W95 Ext'd (LBA) /dev/sda5 5100 10198 40957686 7 HPFS/NTFS /dev/sda6 10199 14787 36861111 7 HPFS/NTFS /dev/sda7 14788 19457 37511743+ 7 HPFS/NTFS /dev/sda8 499 5099 36956160 83 Linux Partition table entries are not in disk order Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc13bc13b Device Boot Start End Blocks Id System /dev/sdc1 1 9729 78143488 7 HPFS/NTFS /dev/sdc2 9729 19457 78143488 7 HPFS/NTFS Disk /dev/sdb: 4194 MB, 4194304000 bytes 112 heads, 47 sectors/track, 1556 cylinders Units = cylinders of 5264 * 512 = 2695168 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 2 1557 4091904 b W95 FAT32

  Read the article

• Windows 7 disappeared in list of Grub while loading

  - by Riyad A.

  Installed Ubuntu 12.04 alongside the Windows 7 two weeks ago. Initially haven't any issues with that. day ago installed updates on Ubuntu and after restarting the system found the absence of Win7 in Grub list. Before the HDD has been partitioned on two volumes Disk C and Work Disk(don't remember the name). When doing the fdisk -l: Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xa93031e0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 408833842 204415897+ 7 HPFS/NTFS/exFAT /dev/sda2 488386560 976773119 244193280 7 HPFS/NTFS/exFAT /dev/sda3 408834046 488386559 39776257 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 408834048 484421631 37793792 83 Linux /dev/sda6 484423680 488386559 1981440 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/mmcblk0p1 8192 7744511 3868160 b W95 FAT32 When sudo mount /dev/sda ~/1 -o offset [488386560*512] - opens and mounts WORK disk. Need help: how to See and mount disk C. how to see and adjust the Grub to appear both systems in Grub menu when loading?

  Read the article

• disk space worngly displayed after installing LVM disk

  - by Ubuntuser

  I installed ubuntu server using LVM partitioning on a 1 TB hard disk. However, after installation, i can only see 10 Gig space here is the fidsk output ` # fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00041507 Device Boot Start End Blocks Id System /dev/sda1 * 1 10 71680 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 10 121602 976689152 8e Linux LVM Disk /dev/dm-0: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/dm-1: 2147 MB, 2147483648 bytes 255 heads, 63 sectors/track, 261 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-1 doesn't contain a valid partition table You have new mail in /var/mail/root and df -h output df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system-root 9.9G 6.6G 2.8G 71% / devtmpfs 1.9G 232K 1.9G 1% /dev tmpfs 1.9G 4.0K 1.9G 1% /dev/shm /dev/sda1 68M 22M 43M 34% /boot tmpfs 6.0G 0 6.0G 0% /var/spool/asterisk/monitor You have new mail in /var/mail/root ` any way to increase this space without reisntalling?

  Read the article

• Raid Shows Up as Multiple Drives - Can't Mount

  - by manyxcxi

  I have a single hard drive that the OS is installed on and I have Sil raid card installed with two matching 500GB hdds set up in Raid 0 and formatted- they're completely empty. For whatever reason they are showing up as /dev/sdb and /dev/sdc and not as a single hard drive. I used fdisk to format both raid drives as Linux raid auto (fd) but I cannot mount either device and dmraid doesn't seem to want to work, what step am I missing? When I installed 9.04 oh so long ago it seems like it recognized and automatically did everything that needed to be done, now I'm stuck. dmraid Output root@tripoli:~# dmraid -r /dev/sdc: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 /dev/sdb: sil, "sil_biaebhadcfcb", stripe, ok, 976771072 sectors, data@ 0 root@tripoli:~# dmraid -ay RAID set "sil_biaebhadcfcb" already active fdisk Output root@tripoli:~# fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000b9b01 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 60802 488134657 5 Extended /dev/sda5 32 60802 488134656 8e Linux LVM Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6ead5c9a Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 fd Linux raid autodetect Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6e2af28 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 fd Linux raid autodetect

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >